| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: clean up ROC on failure
If the firmware fails to start the session protection, then we
do call iwl_mvm_roc_finished() here, but that won't do anything
at all because IWL_MVM_STATUS_ROC_P2P_RUNNING was never set.
Set IWL_MVM_STATUS_ROC_P2P_RUNNING in the failure/stop path.
If it started successfully before, it's already set, so that
doesn't matter, and if it didn't start it needs to be set to
clean up.
Not doing so will lead to a WARN_ON() later on a fresh remain-
on-channel, since the link is already active when activated as
it was never deactivated. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix checksums set in idpf_rx_rsc()
idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header
is not set yet.
This triggers the following warning for CONFIG_DEBUG_NET=y builds.
DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb))
[ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth
[ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697
[ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
[ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748)
[ 69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261687] ? report_bug (lib/bug.c:?)
[ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285)
[ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309)
[ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621)
[ 69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf
[ 69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf
[ 69.261712] __napi_poll (net/core/dev.c:7194)
[ 69.261716] net_rx_action (net/core/dev.c:7265)
[ 69.261718] ? __qdisc_run (net/sched/sch_generic.c:293)
[ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288)
[ 69.261726] handle_softirqs (kernel/softirq.c:561) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
Move the conditional loading of hardware DR6 with the guest's DR6 value
out of the core .vcpu_run() loop to fix a bug where KVM can load hardware
with a stale vcpu->arch.dr6.
When the guest accesses a DR and host userspace isn't debugging the guest,
KVM disables DR interception and loads the guest's values into hardware on
VM-Enter and saves them on VM-Exit. This allows the guest to access DRs
at will, e.g. so that a sequence of DR accesses to configure a breakpoint
only generates one VM-Exit.
For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also
identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest)
and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading
DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop.
But for DR6, the guest's value doesn't need to be loaded into hardware for
KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas
VMX requires software to manually load the guest value, and so loading the
guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done
_inside_ the core run loop.
Unfortunately, saving the guest values on VM-Exit is initiated by common
x86, again outside of the core run loop. If the guest modifies DR6 (in
hardware, when DR interception is disabled), and then the next VM-Exit is
a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and
clobber the guest's actual value.
The bug shows up primarily with nested VMX because KVM handles the VMX
preemption timer in the fastpath, and the window between hardware DR6
being modified (in guest context) and DR6 being read by guest software is
orders of magnitude larger in a nested setup. E.g. in non-nested, the
VMX preemption timer would need to fire precisely between #DB injection
and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the
window where hardware DR6 is "dirty" extends all the way from L1 writing
DR6 to VMRESUME (in L1).
L1's view:
==========
<L1 disables DR interception>
CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0
A: L1 Writes DR6
CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1
B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec
D: L1 reads DR6, arch.dr6 = 0
CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0
CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0
L2 reads DR6, L1 disables DR interception
CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216
CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0
CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0
L2 detects failure
CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT
L1 reads DR6 (confirms failure)
CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0
L0's view:
==========
L2 reads DR6, arch.dr6 = 0
CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
L2 => L1 nested VM-Exit
CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216
CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23
CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD
CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23
CPU 23/KVM-5046 [001] d.... 3410.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()
The documentation for usb_driver_claim_interface() says that "the
device lock" is needed when the function is called from places other
than probe(). This appears to be the lock for the USB interface
device. The Mediatek btusb code gets called via this path:
Workqueue: hci0 hci_power_on [bluetooth]
Call trace:
usb_driver_claim_interface
btusb_mtk_claim_iso_intf
btusb_mtk_setup
hci_dev_open_sync
hci_power_on
process_scheduled_works
worker_thread
kthread
With the above call trace the device lock hasn't been claimed. Claim
it.
Without this fix, we'd sometimes see the error "Failed to claim iso
interface". Sometimes we'd even see worse errors, like a NULL pointer
dereference (where `intf->dev.driver` was NULL) with a trace like:
Call trace:
usb_suspend_both
usb_runtime_suspend
__rpm_callback
rpm_suspend
pm_runtime_work
process_scheduled_works
Both errors appear to be fixed with the proper locking. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: hugetlb: independent PMD page table shared count
The folio refcount may be increased unexpectly through try_get_folio() by
caller such as split_huge_pages. In huge_pmd_unshare(), we use refcount
to check whether a pmd page table is shared. The check is incorrect if
the refcount is increased by the above caller, and this can cause the page
table leaked:
BUG: Bad page state in process sh pfn:109324
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x66 pfn:0x109324
flags: 0x17ffff800000000(node=0|zone=2|lastcpupid=0xfffff)
page_type: f2(table)
raw: 017ffff800000000 0000000000000000 0000000000000000 0000000000000000
raw: 0000000000000066 0000000000000000 00000000f2000000 0000000000000000
page dumped because: nonzero mapcount
...
CPU: 31 UID: 0 PID: 7515 Comm: sh Kdump: loaded Tainted: G B 6.13.0-rc2master+ #7
Tainted: [B]=BAD_PAGE
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
show_stack+0x20/0x38 (C)
dump_stack_lvl+0x80/0xf8
dump_stack+0x18/0x28
bad_page+0x8c/0x130
free_page_is_bad_report+0xa4/0xb0
free_unref_page+0x3cc/0x620
__folio_put+0xf4/0x158
split_huge_pages_all+0x1e0/0x3e8
split_huge_pages_write+0x25c/0x2d8
full_proxy_write+0x64/0xd8
vfs_write+0xcc/0x280
ksys_write+0x70/0x110
__arm64_sys_write+0x24/0x38
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0x128
el0t_64_sync_handler+0xc8/0xd0
el0t_64_sync+0x190/0x198
The issue may be triggered by damon, offline_page, page_idle, etc, which
will increase the refcount of page table.
1. The page table itself will be discarded after reporting the
"nonzero mapcount".
2. The HugeTLB page mapped by the page table miss freeing since we
treat the page table as shared and a shared page table will not be
unmapped.
Fix it by introducing independent PMD page table shared count. As
described by comment, pt_index/pt_mm/pt_frag_refcount are used for s390
gmap, x86 pgds and powerpc, pt_share_count is used for x86/arm64/riscv
pmds, so we can reuse the field as pt_share_count. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: check return value of sock_recvmsg when draining clc data
When receiving clc msg, the field length in smc_clc_msg_hdr indicates the
length of msg should be received from network and the value should not be
fully trusted as it is from the network. Once the value of length exceeds
the value of buflen in function smc_clc_wait_msg it may run into deadloop
when trying to drain the remaining data exceeding buflen.
This patch checks the return value of sock_recvmsg when draining data in
case of deadloop in draining. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sync_linked_regs() must preserve subreg_def
Range propagation must not affect subreg_def marks, otherwise the
following example is rewritten by verifier incorrectly when
BPF_F_TEST_RND_HI32 flag is set:
0: call bpf_ktime_get_ns call bpf_ktime_get_ns
1: r0 &= 0x7fffffff after verifier r0 &= 0x7fffffff
2: w1 = w0 rewrites w1 = w0
3: if w0 < 10 goto +0 --------------> r11 = 0x2f5674a6 (r)
4: r1 >>= 32 r11 <<= 32 (r)
5: r0 = r1 r1 |= r11 (r)
6: exit; if w0 < 0xa goto pc+0
r1 >>= 32
r0 = r1
exit
(or zero extension of w1 at (2) is missing for architectures that
require zero extension for upper register half).
The following happens w/o this patch:
- r0 is marked as not a subreg at (0);
- w1 is marked as subreg at (2);
- w1 subreg_def is overridden at (3) by copy_register_state();
- w1 is read at (5) but mark_insn_zext() does not mark (2)
for zero extension, because w1 subreg_def is not set;
- because of BPF_F_TEST_RND_HI32 flag verifier inserts random
value for hi32 bits of (2) (marked (r));
- this random value is read at (5). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: Ignore frags from uninitialized peer in dp.
When max virtual ap interfaces are configured in all the bands with
ACS and hostapd restart is done every 60s, a crash is observed at
random times.
In this certain scenario, a fragmented packet is received for
self peer, for which rx_tid and rx_frags are not initialized in
datapath. While handling this fragment, crash is observed as the
rx_frag list is uninitialised and when we walk in
ath11k_dp_rx_h_sort_frags, skb null leads to exception.
To address this, before processing received fragments we check
dp_setup_done flag is set to ensure that peer has completed its
dp peer setup for fragment queue, else ignore processing the
fragments.
Call trace:
ath11k_dp_process_rx_err+0x550/0x1084 [ath11k]
ath11k_dp_service_srng+0x70/0x370 [ath11k]
0xffffffc009693a04
__napi_poll+0x30/0xa4
net_rx_action+0x118/0x270
__do_softirq+0x10c/0x244
irq_exit+0x64/0xb4
__handle_domain_irq+0x88/0xac
gic_handle_irq+0x74/0xbc
el1_irq+0xf0/0x1c0
arch_cpu_idle+0x10/0x18
do_idle+0x104/0x248
cpu_startup_entry+0x20/0x64
rest_init+0xd0/0xdc
arch_call_rest_init+0xc/0x14
start_kernel+0x480/0x4b8
Code: f9400281 f94066a2 91405021 b94a0023 (f9406401)
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
IB/rdmavt: add lock to call to rvt_error_qp to prevent a race condition
The documentation of the function rvt_error_qp says both r_lock and s_lock
need to be held when calling that function. It also asserts using lockdep
that both of those locks are held. However, the commit I referenced in
Fixes accidentally makes the call to rvt_error_qp in rvt_ruc_loopback no
longer covered by r_lock. This results in the lockdep assertion failing
and also possibly in a race condition. |
| Protection mechanism failure for some Intel(R) AI Reference Models before version v3.4.1 within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires passive user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Backstage is an open framework for building developer portals. Prior to 0.29.2, the experimental dynamic client registration and client ID metadata document features in the @backstage/plugin-auth-backend use full-string matcher.isMatch glob matching for auth.experimentalDynamicClientRegistration.allowedRedirectUriPatterns and the auth.experimentalClientIdMetadataDocuments allowedClientIdPatterns and allowedRedirectUriPatterns options. A hostname wildcard can match across URL component boundaries, allowing an attacker-controlled redirect URI with a trusted hostname suffix in its path to pass the allowlist and receive an OAuth authorization code after a victim completes the flow. Patterns without an explicit protocol can match unintended protocols, and redirect URIs containing embedded credentials are accepted after user information is stripped for matching. The features are experimental and disabled by default; only deployments that enable them and configure custom wildcard-hostname or protocol-less patterns are affected. This issue is first fixed in prerelease version 0.29.2. |
| Progress MarkLogic Server 12.x releases before 12.1.0 and 11.x releases before 11.3.7 enable XML external entity processing by default in multiple server paths, which could allow crafted XML to cause server-side requests or disclosure of local files. |
| OTRS does not sufficiently enforce the uniqueness of customer user identities across multiple configured CustomerUser backends. When multiple backends, such as a database and LDAP, are configured, the uniqueness check for customer user email addresses is performed only within the selected backend. As a result, an authenticated user with permission to create or modify customer users may create a customer user whose email address is already assigned to a customer user in another backend.
This can result in multiple customer user records representing the same communication identity. Depending on the affected workflow and backend resolution, customer-related information or email communication may subsequently be associated with or exposed to the wrong customer user.
The vulnerability does not allow unauthenticated users to create customer accounts. Exploitation requires permissions to create or modify customer users.
This issue affects OTRS:
* 7.0.X
* 8.0.X
* 2023.X
* 2024.X
* 2025.X
* 2026.X before 2026.7.X
Please note that ((OTRS)) Community Edition 6.x and before are vulnerable. Products based on the ((OTRS)) Community Edition also very likely to be affected |
| JIT miscompilation in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| A security issue was discovered in MongoDB mongos (the sharded cluster router) where an authenticated user with readWrite privileges could crash the mongos process by crafting a specially formed aggregation pipeline. The issue leverages an internal aggregation stage that lacks proper authorization checks despite being intended for internal use, allowing a subsequent stage to be forced to execute on the router under conditions it was not designed to handle. This results in an unhandled fatal error that causes the mongos process to immediately abort, resulting in denial of service for all clients routed through the affected mongos instance. |
| Previously issued authentication tokens are not immediately invalidated when an OTRS agent or customer user account is deactivated or its password is changed. As a result, an existing JWT may remain valid until its regular expiration time, which can be approximately 16 hours.
An attacker who has previously obtained a valid authentication token can therefore continue to access OTRS with the privileges of the affected agent or customer user even after the corresponding account has been deactivated or the user's password has been changed.
The vulnerability does not allow an attacker to obtain authentication tokens by itself. Exploitation requires possession of a previously issued and still valid token. The actual impact depends on the privileges associated with the compromised token. Customer user tokens are limited to the permissions of the affected customer account, while agent tokens may provide access to broader ticket, customer, or administrative functionality depending on the assigned permissions.
This issue affects OTRS:
* 7.0.X
* 8.0.X
* 2023.X
* 2024.X
* 2025.X
* 2026.X before 2026.7.X |
| Insufficient verification of data authenticity in Smart Switch prior to version 3.7.73 allows physical attackers to install arbitrary applications. |
| In Symfony Expression Language versions prior to 5.4.54, 6.4.48, 7.4.21, and 8.1.9, the parser of the ExpressionLanguage component built its node tree with no bound on its depth. An expression made of tens of thousands of nested unary operators, array literals, binary operators or property accesses crashed the PHP process, while the tree was being freed.
#[Assert\ExpressionSyntax] passes the validated value to ExpressionLanguage::lint(), so an application validating expressions written by its users could be crashed by a single request, and so could any code parsing untrusted expressions.
This issue affects symfony/expression-language through v5.4.53, v6.0.0-BETA1 through v6.4.47, v7.0.0-BETA1 through v7.4.20, and v8.0.0-BETA1 through v8.1.8. |
| In Symfony YAML prior to versions 5.4.54, 6.4.45, 7.4.18, and 8.1.6, Yaml\Parser::lexInlineStructure() recursed through lexInlineMapping() and lexInlineSequence() for every { and [ of an inline collection, without entering the nesting level that the rest of the parser bounds with maxNestingLevel. A document made of deeply nested inline collections, such as [[[[...]]]], exhausted the stack while it was being lexed: depending on the PHP version and its stack settings, the process crashed or the request ended with a fatal error.
Any code parsing untrusted YAML is affected. That includes #[MapRequestPayload] when the Yaml component is installed and the endpoint does not restrict acceptFormat: a single unauthenticated request with a YAML content type is enough.
This issue affects symfony/yaml through v5.4.53, v6.0.0-BETA1 through v6.4.44, v7.0.0-BETA1 through v7.4.17, and v8.0.0-BETA1 through v8.1.5. |
| Improper authorization in the query resolvers generated by @aws-amplify/graphql-index-transformer in AWS Amplify API Category before 3.1.2 might allow an authenticated remote user to read records owned by other users of the same application via crafted queries.
This issue has been addressed in @aws-amplify/graphql-index-transformer 3.1.2 https://www.npmjs.com/package/@aws-amplify/graphql-index-transformer/v/3.1.2 (included in @aws-amplify/data-construct 1.17.4 https://www.npmjs.com/package/@aws-amplify/data-construct/v/1.17.4 and @aws-amplify/graphql-api-construct 1.21.4 https://www.npmjs.com/package/@aws-amplify/graphql-api-construct/v/1.21.4 ). We recommend upgrading to the latest version ensuring any forked or derivative code is patched to incorporate the new fixes and then redeploying their backend. |
