Export limit exceeded: 424950 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (6839 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43410 | 1 Linux | 1 Linux Kernel | 2026-05-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled When the Remote System Update (RSU) isn't enabled in the First Stage Boot Loader (FSBL), the driver encounters a NULL pointer dereference when excute svc_normal_to_secure_thread() thread, resulting in a kernel panic: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ... Data abort info: ... [0000000000000008] user address but active_mm is swapper Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 79 Comm: svc_smc_hvc_thr Not tainted 6.19.0-rc8-yocto-standard+ #59 PREEMPT Hardware name: SoCFPGA Stratix 10 SoCDK (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : svc_normal_to_secure_thread+0x38c/0x990 lr : svc_normal_to_secure_thread+0x144/0x990 ... Call trace: svc_normal_to_secure_thread+0x38c/0x990 (P) kthread+0x150/0x210 ret_from_fork+0x10/0x20 Code: 97cfc113 f9400260 aa1403e1 f9400400 (f9400402) ---[ end trace 0000000000000000 ]--- The issue occurs because rsu_send_async_msg() fails when RSU is not enabled in firmware, causing the channel to be freed via stratix10_svc_free_channel(). However, the probe function continues execution and registers svc_normal_to_secure_thread(), which subsequently attempts to access the already-freed channel, triggering the NULL pointer dereference. Fix this by properly cleaning up the async client and returning early on failure, preventing the thread from being used with an invalid channel. | ||||
| CVE-2026-43412 | 1 Linux | 1 Linux Kernel | 2026-05-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: qdsp6: Fix q6apm remove ordering during ADSP stop and start During ADSP stop and start, the kernel crashes due to the order in which ASoC components are removed. On ADSP stop, the q6apm-audio .remove callback unloads topology and removes PCM runtimes during ASoC teardown. This deletes the RTDs that contain the q6apm DAI components before their removal pass runs, leaving those components still linked to the card and causing crashes on the next rebind. Fix this by ensuring that all dependent (child) components are removed first, and the q6apm component is removed last. [ 48.105720] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0 [ 48.114763] Mem abort info: [ 48.117650] ESR = 0x0000000096000004 [ 48.121526] EC = 0x25: DABT (current EL), IL = 32 bits [ 48.127010] SET = 0, FnV = 0 [ 48.130172] EA = 0, S1PTW = 0 [ 48.133415] FSC = 0x04: level 0 translation fault [ 48.138446] Data abort info: [ 48.141422] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 48.147079] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 48.152354] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 48.157859] user pgtable: 4k pages, 48-bit VAs, pgdp=00000001173cf000 [ 48.164517] [00000000000000d0] pgd=0000000000000000, p4d=0000000000000000 [ 48.171530] Internal error: Oops: 0000000096000004 [#1] SMP [ 48.177348] Modules linked in: q6prm_clocks q6apm_lpass_dais q6apm_dai snd_q6dsp_common q6prm snd_q6apm 8021q garp mrp stp llc snd_soc_hdmi_codec apr pdr_interface phy_qcom_edp fastrpc qcom_pd_mapper rpmsg_ctrl qrtr_smd rpmsg_char qcom_pdr_msg qcom_iris v4l2_mem2mem videobuf2_dma_contig ath11k_pci msm ubwc_config at24 ath11k videobuf2_memops mac80211 ocmem videobuf2_v4l2 libarc4 drm_gpuvm mhi qrtr videodev drm_exec snd_soc_sc8280xp gpu_sched videobuf2_common nvmem_qcom_spmi_sdam snd_soc_qcom_sdw drm_dp_aux_bus qcom_q6v5_pas qcom_spmi_temp_alarm snd_soc_qcom_common rtc_pm8xxx qcom_pon drm_display_helper cec qcom_pil_info qcom_stats soundwire_bus drm_client_lib mc dispcc0_sa8775p videocc_sa8775p qcom_q6v5 camcc_sa8775p snd_soc_dmic phy_qcom_sgmii_eth snd_soc_max98357a i2c_qcom_geni snd_soc_core dwmac_qcom_ethqos llcc_qcom icc_bwmon qcom_sysmon snd_compress qcom_refgen_regulator coresight_stm stmmac_platform snd_pcm_dmaengine qcom_common coresight_tmc stmmac coresight_replicator qcom_glink_smem coresight_cti stm_core [ 48.177444] coresight_funnel snd_pcm ufs_qcom phy_qcom_qmp_usb gpi phy_qcom_snps_femto_v2 coresight phy_qcom_qmp_ufs qcom_wdt gpucc_sa8775p pcs_xpcs mdt_loader qcom_ice icc_osm_l3 qmi_helpers snd_timer snd soundcore display_connector qcom_rng nvmem_reboot_mode drm_kms_helper phy_qcom_qmp_pcie sha256 cfg80211 rfkill socinfo fuse drm backlight ipv6 [ 48.301059] CPU: 2 UID: 0 PID: 293 Comm: kworker/u32:2 Not tainted 6.19.0-rc6-dirty #10 PREEMPT [ 48.310081] Hardware name: Qualcomm Technologies, Inc. Lemans EVK (DT) [ 48.316782] Workqueue: pdr_notifier_wq pdr_notifier_work [pdr_interface] [ 48.323672] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 48.330825] pc : mutex_lock+0xc/0x54 [ 48.334514] lr : soc_dapm_shutdown_dapm+0x44/0x174 [snd_soc_core] [ 48.340794] sp : ffff800084ddb7b0 [ 48.344207] x29: ffff800084ddb7b0 x28: ffff00009cd9cf30 x27: ffff00009cd9cc00 [ 48.351544] x26: ffff000099610190 x25: ffffa31d2f19c810 x24: ffffa31d2f185098 [ 48.358869] x23: ffff800084ddb7f8 x22: 0000000000000000 x21: 00000000000000d0 [ 48.366198] x20: ffff00009ba6c338 x19: ffff00009ba6c338 x18: 00000000ffffffff [ 48.373528] x17: 000000040044ffff x16: ffffa31d4ae6dca8 x15: 072007740775076f [ 48.380853] x14: 0765076d07690774 x13: 00313a323a656369 x12: 767265733a637673 [ 48.388182] x11: 00000000000003f9 x10: ffffa31d4c7dea98 x9 : 0000000000000001 [ 48.395519] x8 : ffff00009a2aadc0 x7 : 0000000000000003 x6 : 0000000000000000 [ 48.402854] x5 : 0000000000000 ---truncated--- | ||||
| CVE-2026-43424 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: Fix NULL pointer dereferences in nexus handling The `tpg->tpg_nexus` pointer in the USB Target driver is dynamically managed and tied to userspace configuration via ConfigFS. It can be NULL if the USB host sends requests before the nexus is fully established or immediately after it is dropped. Currently, functions like `bot_submit_command()` and the data transfer paths retrieve `tv_nexus = tpg->tpg_nexus` and immediately dereference `tv_nexus->tvn_se_sess` without any validation. If a malicious or misconfigured USB host sends a BOT (Bulk-Only Transport) command during this race window, it triggers a NULL pointer dereference, leading to a kernel panic (local DoS). This exposes an inconsistent API usage within the module, as peer functions like `usbg_submit_command()` and `bot_send_bad_response()` correctly implement a NULL check for `tv_nexus` before proceeding. Fix this by bringing consistency to the nexus handling. Add the missing `if (!tv_nexus)` checks to the vulnerable BOT command and request processing paths, aborting the command gracefully with an error instead of crashing the system. | ||||
| CVE-2026-43471 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix possible NULL pointer dereference in ufshcd_add_command_trace() The kernel log indicates a crash in ufshcd_add_command_trace, due to a NULL pointer dereference when accessing hwq->id. This can happen if ufshcd_mcq_req_to_hwq() returns NULL. This patch adds a NULL check for hwq before accessing its id field to prevent a kernel crash. Kernel log excerpt: [<ffffffd5d192dc4c>] notify_die+0x4c/0x8c [<ffffffd5d1814e58>] __die+0x60/0xb0 [<ffffffd5d1814d64>] die+0x4c/0xe0 [<ffffffd5d181575c>] die_kernel_fault+0x74/0x88 [<ffffffd5d1864db4>] __do_kernel_fault+0x314/0x318 [<ffffffd5d2a3cdf8>] do_page_fault+0xa4/0x5f8 [<ffffffd5d2a3cd34>] do_translation_fault+0x34/0x54 [<ffffffd5d1864524>] do_mem_abort+0x50/0xa8 [<ffffffd5d2a297dc>] el1_abort+0x3c/0x64 [<ffffffd5d2a29718>] el1h_64_sync_handler+0x44/0xcc [<ffffffd5d181133c>] el1h_64_sync+0x80/0x88 [<ffffffd5d255c1dc>] ufshcd_add_command_trace+0x23c/0x320 [<ffffffd5d255bad8>] ufshcd_compl_one_cqe+0xa4/0x404 [<ffffffd5d2572968>] ufshcd_mcq_poll_cqe_lock+0xac/0x104 [<ffffffd5d11c7460>] ufs_mtk_mcq_intr+0x54/0x74 [ufs_mediatek_mod] [<ffffffd5d19ab92c>] __handle_irq_event_percpu+0xc8/0x348 [<ffffffd5d19abca8>] handle_irq_event+0x3c/0xa8 [<ffffffd5d19b1f0c>] handle_fasteoi_irq+0xf8/0x294 [<ffffffd5d19aa778>] generic_handle_domain_irq+0x54/0x80 [<ffffffd5d18102bc>] gic_handle_irq+0x1d4/0x330 [<ffffffd5d1838210>] call_on_irq_stack+0x44/0x68 [<ffffffd5d183af30>] do_interrupt_handler+0x78/0xd8 [<ffffffd5d2a29c00>] el1_interrupt+0x48/0xa8 [<ffffffd5d2a29ba8>] el1h_64_irq_handler+0x14/0x24 [<ffffffd5d18113c4>] el1h_64_irq+0x80/0x88 [<ffffffd5d2527fb4>] arch_local_irq_enable+0x4/0x1c [<ffffffd5d25282e4>] cpuidle_enter+0x34/0x54 [<ffffffd5d195a678>] do_idle+0x1dc/0x2f8 [<ffffffd5d195a7c4>] cpu_startup_entry+0x30/0x3c [<ffffffd5d18155c4>] secondary_start_kernel+0x134/0x1ac [<ffffffd5d18640bc>] __secondary_switched+0xc4/0xcc | ||||
| CVE-2026-43431 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xhci: Fix NULL pointer dereference when reading portli debugfs files Michal reported and debgged a NULL pointer dereference bug in the recently added portli debugfs files Oops is caused when there are more port registers counted in xhci->max_ports than ports reported by Supported Protocol capabilities. This is possible if max_ports is more than maximum port number, or if there are gaps between ports of different speeds the 'Supported Protocol' capabilities. In such cases port->rhub will be NULL so we can't reach xhci behind it. Add an explicit NULL check for this case, and print portli in hex without dereferencing port->rhub. | ||||
| CVE-2026-31425 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rds: ib: reject FRMR registration before IB connection is established rds_ib_get_mr() extracts the rds_ib_connection from conn->c_transport_data and passes it to rds_ib_reg_frmr() for FRWR memory registration. On a fresh outgoing connection, ic is allocated in rds_ib_conn_alloc() with i_cm_id = NULL because the connection worker has not yet called rds_ib_conn_path_connect() to create the rdma_cm_id. When sendmsg() with RDS_CMSG_RDMA_MAP is called on such a connection, the sendmsg path parses the control message before any connection establishment, allowing rds_ib_post_reg_frmr() to dereference ic->i_cm_id->qp and crash the kernel. The existing guard in rds_ib_reg_frmr() only checks for !ic (added in commit 9e630bcb7701), which does not catch this case since ic is allocated early and is always non-NULL once the connection object exists. KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:rds_ib_post_reg_frmr+0x50e/0x920 Call Trace: rds_ib_post_reg_frmr (net/rds/ib_frmr.c:167) rds_ib_map_frmr (net/rds/ib_frmr.c:252) rds_ib_reg_frmr (net/rds/ib_frmr.c:430) rds_ib_get_mr (net/rds/ib_rdma.c:615) __rds_rdma_map (net/rds/rdma.c:295) rds_cmsg_rdma_map (net/rds/rdma.c:860) rds_sendmsg (net/rds/send.c:1363) ____sys_sendmsg do_syscall_64 Add a check in rds_ib_get_mr() that verifies ic, i_cm_id, and qp are all non-NULL before proceeding with FRMR registration, mirroring the guard already present in rds_ib_post_inv(). Return -ENODEV when the connection is not ready, which the existing error handling in rds_cmsg_send() converts to -EAGAIN for userspace retry and triggers rds_conn_connect_if_down() to start the connection worker. | ||||
| CVE-2026-32738 | 1 Struktur | 1 Libheif | 2026-05-20 | 6.5 Medium |
| libheif is a HEIF and AVIF file format decoder and encoder. In versions 1.21.2 and below, a crafted 792-byte HEIF sequence file with samples_per_chunk=0 in the stsc box causes an unsigned integer underflow in the Chunk constructor (m_last_sample = 0 + 0 - 1 = UINT32_MAX), mapping all samples to an empty chunk and resulting in a denial of service. When any sample is accessed, the library reads from index 0 of an empty std::vector, causing a guaranteed SEGV (null-page read). The file parses successfully without producing an error; the crash occurs on the first frame access. This issue has been fixed in version 1.22.0. | ||||
| CVE-2026-31397 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix use of NULL folio in move_pages_huge_pmd() move_pages_huge_pmd() handles UFFDIO_MOVE for both normal THPs and huge zero pages. For the huge zero page path, src_folio is explicitly set to NULL, and is used as a sentinel to skip folio operations like lock and rmap. In the huge zero page branch, src_folio is NULL, so folio_mk_pmd(NULL, pgprot) passes NULL through folio_pfn() and page_to_pfn(). With SPARSEMEM_VMEMMAP this silently produces a bogus PFN, installing a PMD pointing to non-existent physical memory. On other memory models it is a NULL dereference. Use page_folio(src_page) to obtain the valid huge zero folio from the page, which was obtained from pmd_page() and remains valid throughout. After commit d82d09e48219 ("mm/huge_memory: mark PMD mappings of the huge zero folio special"), moved huge zero PMDs must remain special so vm_normal_page_pmd() continues to treat them as special mappings. move_pages_huge_pmd() currently reconstructs the destination PMD in the huge zero page branch, which drops PMD state such as pmd_special() on architectures with CONFIG_ARCH_HAS_PTE_SPECIAL. As a result, vm_normal_page_pmd() can treat the moved huge zero PMD as a normal page and corrupt its refcount. Instead of reconstructing the PMD from the folio, derive the destination entry from src_pmdval after pmdp_huge_clear_flush(), then handle the PMD metadata the same way move_huge_pmd() does for moved entries by marking it soft-dirty and clearing uffd-wp. | ||||
| CVE-2026-32134 | 1 Nanomq | 1 Nanomq | 2026-05-19 | 5.9 Medium |
| NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. In versions 0.24.10 and below, when NanoMQ handles high-concurrency reconnect traffic using a reconnect-collision payload, the broker can crash due to a NULL pointer dereference during MQTT session resumption for clean_start=0 clients. The transport's p_peer callback (tcptran_pipe_peer()) iterates cpipe->subinfol while copying session metadata from the cached old pipe to the new reconnecting pipe, without checking whether the pointer is NULL. Under a reconnect race, cpipe->subinfol can be freed and set to NULL before session restore invokes this function, resulting in a remote unauthenticated Denial-of-Service (process crash) condition. This issue has been fixed in version 0.24.11. | ||||
| CVE-2026-7701 | 1 Telegram | 2 Desktop, Telegram Desktop | 2026-05-19 | 4.3 Medium |
| A security vulnerability has been detected in Telegram Desktop up to 6.7.5. This vulnerability affects the function RequestButton of the file Telegram/SourceFiles/boxes/url_auth_box.cpp of the component Bot API. The manipulation of the argument login_url leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. There is ongoing doubt regarding the real existence of this vulnerability. Upgrading to version 6.7.6 is able to resolve this issue. Upgrading the affected component is recommended. The vendor provides this rationale for the dispute: "[T]he described scenario does not lead to any security issue or vulnerability, and only causes a one-time crash. In the outlined scenario, the targeted user must perform an active action, which doesn't produce any consequences after the app is relaunched." | ||||
| CVE-2026-25110 | 1 Openharmony | 1 Openharmony | 2026-05-19 | 3.3 Low |
| in OpenHarmony v6.0 and prior versions allow a local attacker cause DOS. | ||||
| CVE-2026-32849 | 1 Netbsd | 1 Src | 2026-05-19 | 5.5 Medium |
| NetBSD prior to commit ec8451e contains a signed integer overflow vulnerability in the cryptodev_op() function in sys/opencrypto/cryptodev.c where the local variable iov_len is declared as a signed int but assigned from an unsigned cop->dst_len value, causing undefined behavior when cop->dst_len exceeds INT_MAX. A local attacker with access to /dev/crypto and a compression session type can exploit this vulnerability by providing a dst_len value exceeding INT_MAX to trigger a kernel panic through NULL pointer dereference when CONFIG_SVS is disabled and corrupted UIO pointer arithmetic. | ||||
| CVE-2026-8782 | 1 Omec-project | 1 Amf | 2026-05-18 | 4.3 Medium |
| A weakness has been identified in omec-project amf up to 2.1.3-dev. This affects an unknown function of the file ngap/handler.go of the component NGAP Message Handler. This manipulation causes null pointer dereference. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. Upgrading to version 2.2.0 mitigates this issue. It is recommended to upgrade the affected component. The same pull request fixes multiple security issues. | ||||
| CVE-2026-8783 | 1 Omec-project | 1 Amf | 2026-05-18 | 4.3 Medium |
| A security vulnerability has been detected in omec-project amf up to 2.1.3-dev. This impacts the function UERadioCapabilityCheckResponse of the file ngap/dispatcher.go. Such manipulation leads to null pointer dereference. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 2.2.0 will fix this issue. Upgrading the affected component is advised. The same pull request fixes multiple security issues. | ||||
| CVE-2026-8723 | 1 Ljharb | 1 Qs | 2026-05-18 | 5.3 Medium |
| ### Summary `qs.stringify` throws `TypeError` when called with `arrayFormat: 'comma'` and `encodeValuesOnly: true` on an array containing `null` or `undefined`. The throw is synchronous and not handled by any of qs's null-related options (`skipNulls`, `strictNullHandling`). ### Details In the comma + `encodeValuesOnly` branch, `lib/stringify.js:145` mapped the array through the raw encoder before joining: ```js obj = utils.maybeMap(obj, encoder); ``` `utils.encode` (`lib/utils.js:195`) reads `str.length` with no null guard, so a `null` or `undefined` element throws `TypeError`. `skipNulls` and `strictNullHandling` are both checked in the per-element loop below this line and never get a chance to run. Same class of bug as the filter-array path fixed in 0c180a4. The vulnerable shape of the comma + `encodeValuesOnly` branch was introduced in 4c4b23d ("encode comma values more consistently", PR #463, 2023-01-19), first released in v6.11.1. #### PoC ```js const qs = require('qs'); qs.stringify({ a: [null, 'b'] }, { arrayFormat: 'comma', encodeValuesOnly: true }); qs.stringify({ a: [undefined, 'b'] }, { arrayFormat: 'comma', encodeValuesOnly: true }); qs.stringify({ a: [null] }, { arrayFormat: 'comma', encodeValuesOnly: true }); // TypeError: Cannot read properties of null (reading 'length') // at encode (lib/utils.js:195:13) // at Object.maybeMap (lib/utils.js:322:37) // at stringify (lib/stringify.js:145:25) ``` #### Fix `lib/stringify.js:145`, applied in 21f80b3 on `main` and released as v6.15.2: ```diff - obj = utils.maybeMap(obj, encoder); + obj = utils.maybeMap(obj, function (v) { + return v == null ? v : encoder(v); + }); ``` `null` and `undefined` now pass through `maybeMap` unchanged and reach the `join(',')` step as-is. For `{ a: [null, 'b'] }` this produces `a=,b`, matching the non-`encodeValuesOnly` comma path (which already joins before encoding and produces `a=%2Cb` for the same input). Single-element `[null]` arrays still collapse via the existing `obj.join(',') || null` and remain subject to `skipNulls` / `strictNullHandling` in the main loop. ### Affected versions `>=6.11.1 <6.15.2` — fixed in v6.15.2. The vulnerable code shape was introduced in 4c4b23d and first shipped in v6.11.1. Earlier versions — including all of 6.7.x, 6.8.x, 6.9.x, 6.10.x, and 6.11.0 — implemented the comma + `encodeValuesOnly` path differently (joining before encoding) and are not affected. Empirically verified across released versions. ### Impact Application code that calls `qs.stringify` with both `arrayFormat: 'comma'` and `encodeValuesOnly: true` (both non-default) on input that may contain a `null` or `undefined` array element will throw synchronously instead of producing a query string. In a typical Node.js HTTP framework (Express, Fastify, Koa, hapi) the sync throw is caught by the framework's error boundary and the affected request returns a 500; the worker process does not exit and subsequent requests are unaffected. The "kills the worker process" framing applies only to call sites outside a request-handler error boundary (background jobs, startup paths, stream pipelines) or to deployments with framework error handling explicitly disabled. The vulnerable input is a `null` or `undefined` entry inside an array; this is reachable from JSON request bodies or from application code constructing arrays from user input, but not from standard HTML form submissions (which produce strings or omitted fields, not literal `null`). | ||||
| CVE-2026-42442 | 1 M2team | 1 Nanazip | 2026-05-18 | 3.3 Low |
| NanaZip is an open source file archive. From 5.0.1252.0 to before 6.0.1698.0, a null-pointer dereference exists in the UFS/UFS2 filesystem image parser in NanaZip. The vulnerability is triggered when opening a crafted UFS image where the root inode (inode 2) is set to IFLNK (symlink) instead of IFDIR (directory). The parser unconditionally treats the root inode as a directory without checking its type, and when the symlink has an embedded target (small di_size), the directory data buffer is zero-length, causing a null-pointer dereference on the first read. This vulnerability is fixed in 6.0.1698.0. | ||||
| CVE-2026-8781 | 1 Omec-project | 1 Amf | 2026-05-18 | 4.3 Medium |
| A security flaw has been discovered in omec-project amf up to 2.1.3-dev. The impacted element is the function RANConfiguration of the file ngap/handler.go. The manipulation results in null pointer dereference. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 2.2.0 is sufficient to resolve this issue. Upgrading the affected component is recommended. The same pull request fixes multiple security issues. | ||||
| CVE-2026-20771 | 1 Intel | 2 Qat Drivers, Quickassist Technology | 2026-05-15 | 6.1 Medium |
| Null pointer dereference for some Intel(R) QAT software drivers for Windows before version 1.13 within Ring 3: User Applications may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. | ||||
| CVE-2026-43335 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: interconnect: qcom: sm8450: Fix NULL pointer dereference in icc_link_nodes() The change to dynamic IDs for SM8450 platform interconnects left two links unconverted, fix it to avoid the NULL pointer dereference in runtime, when a pointer to a destination interconnect is not valid: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 <...> Call trace: icc_link_nodes+0x3c/0x100 (P) qcom_icc_rpmh_probe+0x1b4/0x528 platform_probe+0x64/0xc0 really_probe+0xc4/0x2a8 __driver_probe_device+0x80/0x140 driver_probe_device+0x48/0x170 __device_attach_driver+0xc0/0x148 bus_for_each_drv+0x88/0xf0 __device_attach+0xb0/0x1c0 device_initial_probe+0x58/0x68 bus_probe_device+0x40/0xb8 deferred_probe_work_func+0x90/0xd0 process_one_work+0x15c/0x3c0 worker_thread+0x2e8/0x400 kthread+0x150/0x208 ret_from_fork+0x10/0x20 Code: 900310f4 911d6294 91008280 94176078 (f94002a0) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception | ||||
| CVE-2026-44638 | 1 Saitoha | 1 Libsixel | 2026-05-15 | 2.5 Low |
| libsixel is a SIXEL encoder/decoder implementation derived from kmiya's sixel. From to 1.8.7-r1, a wrong NULL check after an allocation call in sixel_decode_raw and sixel_decode causes a NULL pointer dereference whenever the allocation fails. The check tests the address of the output parameter (always non-NULL) instead of the value the malloc returned. On allocation failure, the function continues and writes through a NULL pointer, crashing the process. This is a denial of service against any caller of these public APIs that hits a low-memory condition. This vulnerability is fixed in 1.8.7-r2. | ||||