| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A certificate validation bypass in Node.js https.Agent lets a cached TLS session authenticated under one CA policy be reused by a later request with a stricter policy. https.Agent.prototype.getName() assigns the same Agent and session-cache key to a request that omits ca and one that explicitly supplies ca: [], because an omitted value appends nothing to the key while an empty array stringifies to an empty string. The two policies differ: omitting ca uses the default trust store, while supplying ca replaces it. Since they share a key, a TLS session authenticated under the broader default policy is handed to a new connection made under the later ca: [] policy, and TLS 1.3 session resumption carries the earlier authentication forward, so the second request reports authorized === true and transmits confidential data to a server its own CA policy would reject on a fresh connection. This vulnerability affects Node.js 26.x, 24.x, and 22.x. |
| A client certificate authentication bypass in Node.js TLS lets a client change the servername during TLS 1.2 renegotiation to reach endpoints it was not authorized for. On a server that applies different client-certificate policies per hostname, for example stricter admin-only client-cert auth on one host and ordinary client-cert auth on another, a client that authenticates for a permitted host can renegotiate the TLS 1.2 connection under a different servername and carry its existing authentication to the protected host, bypassing the stricter policy. This vulnerability affects Node.js 26.x, 24.x, and 22.x. |
| A use-after-free in Node.js HTTP/2 lets an unauthenticated client corrupt server memory, over both TLS and cleartext, when the server serves files with respondWithFile() or respondWithFD(). A client can make the server free an Http2Stream while a write request that points to it is still queued on the socket; when that write completes, the code dereferences and makes a virtual call through the freed object. The only precondition is that the application serves a file with stream.respondWithFile() or stream.respondWithFD(), with default settings otherwise. This vulnerability affects Node.js 26.x (since 26.9.0) and 24.x (since 24.22.0). |
| A NULL pointer dereference in Node.js HTTP/2 lets an unauthenticated client crash the server, over both TLS and cleartext, by cancelling file downloads. When the server serves a file with stream.respondWithFile() or stream.respondWithFD() and the client cancels the request, a StreamPipe used for the transfer is torn down in an order that leaves a NULL pointer which is then dereferenced, aborting the process. No crafted frames are needed, and a handful of cancelled requests against a default file-serving handler is enough. This vulnerability affects Node.js 26.x, 24.x, and 22.x. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/pagemap: Prevent double migration of device pages
A device-private folio migrated to system memory by a CPU fault can
remain reachable through the raw-PFN eviction path until migration
finalization drops the source reference.
If eviction selects the same device-private folio during this window,
it can attempt to migrate the folio again. The second migration can leave
an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to
retry indefinitely and resulting in a soft lockup and RCU stall.
Mark successfully migrated device-private folios using a low bit of
their zone_device_data before migration finalization. Make both CPU-fault
and raw-PFN migration paths skip device-private folios carrying this
flag.
Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve
it when a device-private folio is split. Keeping the state on the physical
folio also avoids depending on a virtual address that may change before a
fault occurs.
v2:
- Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost)
- Mark every base page covered by a migrated folio so retirement remains
valid if the folio is later split.
v3:
- Store the migrated state in a low bit of zone_device_data instead of
adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost)
- Mask the flag when retrieving the ZDD and preserve it when splitting
a folio.
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
v4:
- Advance by the folio size only for migration entries marked with
MIGRATE_PFN_COMPOUND. (Sashiko)
v5:
- Simplify ZDD flag updates and folio iteration. (Matthew Brost)
- Skip retired device-private folios in the CPU-fault path. (Matthew Brost)
- Preserve flag bits while taking a new ZDD reference for split folios.
v6:
- Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration
entries are processed one at a time. (Sashiko)
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
The lockup was observed as:
[10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557]
[10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE
[10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
[10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe]
[10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80
[10109.860655] Call Trace:
[10109.860655] <TASK>
[10109.860657] folio_lruvec_lock_irqsave+0x216/0x220
[10109.860661] ? __pfx_lru_add+0x10/0x10
[10109.860665] folio_batch_move_lru+0xc8/0x450
[10109.860670] ? lock_acquire+0xc4/0x2d0
[10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0
[10109.860677] ? folio_migrate_mapping+0xa6/0x110
[10109.860679] ? folio_migrate_flags+0x13b/0x1b0
[10109.860681] ? __pfx_lru_add+0x10/0x10
[10109.860683] __folio_batch_add_and_move+0xe7/0x2e0
[10109.860685] ? dma_iova_try_alloc+0xb0/0x140
[10109.860689] folio_add_lru+0x64/0x80
[10109.860691] __migrate_device_finalize+0x12c/0x270
[10109.860695] migrate_device_finalize+0x10/0x20
[10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper]
[10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper]
[10109.860709] xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860921] xe_bo_move+0x107e/0x1570 [xe]
[10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe]
[10109.861059] ? __up_read+0x98/0x2b0
[10109.861061] ? lock_is_held_type+0xa3/0x130
[10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm]
[10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm]
[10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm]
[10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm]
[10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe]
[10109.861198] ttm_bo_alloc_resource+0x219/0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix out-of-bounds write in l2cap_ecred_connect
l2cap_chan_connect() tries to ensure there are no more than
L2CAP_ECRED_CONN_SCID_MAX pending ECRED channels, so they fit in the
same L2CAP_ECRED_CONN_REQ that l2cap_ecred_connect() constructs.
However, the check only counts deferred channels. If 6 L2CAP sockets
are connected at the same time in order DDDDND (D=deferred,
N=non-deferred), the last can bump the total to max+1. It results to
one __le16 written out of bounds of the scid array, and an invalid
ECRED_CONN_REQ being sent.
Fix by leaving room for the non-deferred pending ECRED channels in the
counting in l2cap_chan_connect(), so the limit can't be exceeded.
Move counting under same critical section where the channel is added.
Although race conditions involving this appear unreachable, it's easier
to see.
Also add WARN_ON_ONCE check in l2cap_ecred_defer_connect() to make this
less brittle. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix chan mode for LE_CONN_REQ + EXT_FLOWCTL pchan
l2cap_new_connection() sets default value of channel mode to match the
parent channel. l2cap_le_connect_req() left this at the default, and
created L2CAP_MODE_EXT_FLOWCTL channels if listening pchan has that
mode. This causes FLAG_DEFER_SETUP channels to reply to
L2CAP_LE_CONN_REQ with L2CAP_ECRED_CONN_RSP, which is incorrect.
It can also result to stack OOB write (of l2cap_alloc_cid determined
values) in l2cap_ecred_rsp_defer(), as l2cap_le_connect_req() does not
limit maximum number of deferred channels or check for duplicate ident.
Fix by setting chan->mode correctly in l2cap_le_connect_req().
Also check channel mode in l2cap_ecred_rsp_defer(), and do WARN_ON_ONCE
instead of OOB write to make it less brittle. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: function: rndis: add length check for header
Add a length check for the rndis header in rndis_rm_hdr, to ensure that
MessageType, MessageLength, DataOffset, and DataLength fields are
present before they are accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: bmc150: clamp the device-reported FIFO frame count
__bmc150_accel_fifo_flush() copies the number of samples the device
reports in its hardware FIFO into an on-stack buffer
u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3];
which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The
frame count is read from the FIFO_STATUS register and only masked to its
7 valid bits:
count = val & 0x7F;
so it can be 0..127. The only other limit applied to it is the optional
caller-supplied sample budget:
if (samples && count > samples)
count = samples;
which does not constrain count on the flush-all path (samples == 0), and
leaves it well above 32 whenever samples is larger. count samples are
then transferred into buffer[]:
bmc150_accel_fifo_transfer(data, (u8 *)buffer, count);
bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a
malfunctioning, malicious or counterfeit accelerometer (or an attacker
tampering with the I2C/SPI bus) that reports up to 127 frames writes up
to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up
to 570 bytes that clobbers the stack canary, saved registers and the
return address.
Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[]
is sized for, before the transfer, mirroring the watermark clamp already
done in bmc150_accel_set_watermark(). A well-formed flush reports at most
BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: free inet_opt and ireq_opt after an RCU grace period
tcp_v4_syn_recv_sock() transfers ownership of ireq->ireq_opt to the
child socket (newinet->inet_opt) without copying it.
Another cpu can concurrently process a retransmitted SYN for the same
request socket, and send a SYNACK from tcp_check_req().
tcp_v4_send_synack() and inet_csk_route_req() read ireq->ireq_opt
under rcu_read_lock() only, and ip_build_and_send_pkt() and
ip_options_build() then read opt->optlen twice.
Note that the SYNACK timer itself is not an issue: it holds a
reference on its request socket, and inet_csk_reqsk_queue_drop()
calls timer_delete_sync() before the child can be freed.
Since commit 079096f103fa ("tcp/dccp: install syn_recv requests
into ehash table"), request sockets are processed without holding
the listener lock, so nothing prevents the child socket from being
freed while the SYNACK is still being built. TCP child sockets do
not have SOCK_RCU_FREE, and inet_sock_destruct() frees inet_opt
with a plain kfree(), leading to a use-after-free in
ip_options_build().
A similar issue exists with request socket migration
(net.ipv4.tcp_migrate_req=1, or a BPF_SK_REUSEPORT_SELECT_OR_MIGRATE
program). reqsk_timer_handler() clones the request socket with
inet_reqsk_clone(), so that the old request socket and its clone
share the same ireq_opt, then reqsk_migrate_reset() clears the
pointer in the old one. Another cpu holding a reference on the old
request socket can still be using these options (sending a SYNACK,
or creating a child in tcp_v4_syn_recv_sock()) when the clone is
freed, and tcp_v4_reqsk_destructor() also uses a plain kfree().
Readers already use RCU, and other paths replacing inet_opt
(do_ip_setsockopt(), cipso_v4_sock_setattr()...) already use
kfree_rcu(). Use kfree_rcu() in inet_sock_destruct() and
tcp_v4_reqsk_destructor() as well.
IPv6 is not affected by the first issue, because tcp_v6_syn_recv_sock()
duplicates the options. tcp_v6_reqsk_destructor() has the same
migration issue with ipv6_opt, which is only set by CALIPSO. This
will be addressed in a separate patch. |
| A flaw was found in AWX. The debug API endpoints (/api/debug/task_manager/, /api/debug/dependency_manager/, /api/debug/workflow_manager/) are registered unconditionally in the URL configuration and use AllowAny permission class with _ignore_model_permissions=True. This allows an unauthenticated remote attacker to repeatedly invoke scheduler operations that acquire database advisory locks and open transactions, potentially leading to resource exhaustion and degraded service availability. |
| A vulnerability related to URL redirection handling during the sign-out flow that could allow a user to be redirected to unintended external content under specific conditions. |
| A validation flaw in the DNS SRV host discovery of the MongoDB Node.js driver may cause the driver to connect to a host outside the expected domain. For a mongodb+srv:// connection string, the driver checks each host name in the DNS SRV response against the domain of the connection string. The driver then builds the connection address from the original name, in which certain characters end the host name early. An unauthenticated party who can forge or change the DNS SRV response may redirect the connection to a host of their choice. TLS does not prevent this, because the driver verifies the server certificate against the redirected host name. This may result in unintended disclosure of application data and authentication credentials, and in altered query results. Applications that use mongodb:// connection strings are not affected. |
| The GitIdentifiers class in Apache Commons Codec did not reject NUL bytes in tree entry names. Because Git uses a NUL byte to mark the end of each entry name in a tree object, a crafted name could make one tree serialize to the same bytes as a different tree. Two different directory trees could then receive the same Git tree identifier or SWHID.
The impact is limited: common file systems do not allow NUL bytes in file names, so trees built by walking a file system are not affected. Only applications that build trees from names supplied by other sources, such as entries of archive formats that permit NUL bytes in names (e.g. ZIP) or names passed directly to the API, are exposed.
This issue affects Apache Commons Codec: from 1.22.0 before 1.23.0.
Users are recommended to upgrade to version 1.23.0, which fixes the issue. |
| Apache Commons Codec's Blake3 class documented the output of its doFinalize methods as depending on any previously finalized bytes, so that consecutive calls would return different output. In fact, doFinalize does not change the hash state: calling it again without supplying more input returns the same bytes. The key-derivation example in the class Javadoc, shipped since 1.16.0, derives two keys with two consecutive doFinalize calls. Code that follows it gets identical keys, so the separation between the derived keys is lost. The same applies to any application that calls doFinalize more than once on one instance and expects new output each time.
This issue affects Apache Commons Codec from 1.16.0 before 1.23.0.
Version 1.23.0 corrects the documentation, but the behavior of doFinalize is unchanged. Upgrading alone does not fix affected code. Users should check their applications for repeated doFinalize calls on the same Blake3 instance and derive multiple keys by requesting the combined length in one call and splitting the output, as the updated Javadoc shows. |
| Use of uninitialized resource in Windows Hyper-V allows an authorized attacker to elevate privileges locally. |
| Double free in Windows Message Queuing allows an unauthorized attacker to execute code over a network. |
| Use after free in Windows Kernel allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds Read vulnerability in the Guththila XML parser wrapper of Apache Axis2/C. On some malformed XML input the Guththila parser returned a raw input byte in place of an event code, and the AXIOM reader wrapper used that value as an index into a ten-entry lookup table without checking its range, reading heap memory past the end of the table. An unauthenticated client could trigger this by sending a crafted XML request to a server built with Guththila, the default parser, causing the request to be parsed incorrectly or, in some cases, the process to crash. The memory read is not returned to the client. This issue affects Apache Axis2/C: through 2.0.0. The fix is available in commits 23110287924e79d05a5b4712298c355d1f05c606 and f01683ec10e8fddb87279ec9351b3239021223e6 and will be included in the next release. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix out-of-bounds read in the Traktor Kontrol S4 input parser
snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input
stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every
iteration it advances buf and subtracts the block size while looping on
"while (len)".
len is urb->actual_length. That value is supplied by the device and is
not guaranteed to be a multiple of 16. When a final short block leaves
len between 1 and 15, the loop runs once more, reads up to buf[15], and
then does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflows
to a huge value. The loop then keeps iterating and walking buf far past
the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus
block id happens to be hit.
Iterate only while a full message block is available. This stops the
unsigned underflow and silently drops any trailing partial block, which
carries no complete control value anyway.
The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1
and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor
urb->actual_length before dispatching. |
