| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix btrfs_ioctl_space_info() slot_count TOCTOU which can lead to info-leak
btrfs_ioctl_space_info() has a TOCTOU race between two passes over the
block group RAID type lists. The first pass counts entries to determine
the allocation size, then the second pass fills the buffer. The
groups_sem rwlock is released between passes, allowing concurrent block
group removal to reduce the entry count.
When the second pass fills fewer entries than the first pass counted,
copy_to_user() copies the full alloc_size bytes including trailing
uninitialized kmalloc bytes to userspace.
Fix by copying only total_spaces entries (the actually-filled count from
the second pass) instead of alloc_size bytes, and switch to kzalloc so
any future copy size mismatch cannot leak heap data. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock
Patch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path".
Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could race
with their writes, results in use-after-free. Fix those.
This patch (of 2):
damon_sysfs_scheme_filter->mmecg_path can be read and written by users,
via DAMON sysfs memcg_path file. It can also be indirectly read, for the
parameters {on,off}line committing to DAMON. The reads for parameters
committing are protected by damon_sysfs_lock to avoid the sysfs files
being destroyed while any of the parameters are being read. But the
user-driven direct reads and writes are not protected by any lock, while
the write is deallocating the memcg_path-pointing buffer. As a result,
the readers could read the already freed buffer (user-after-free). Note
that the user-reads don't race when the same open file is used by the
writer, due to kernfs's open file locking. Nonetheless, doing the reads
and writes with separate open files would be common. Fix it by protecting
both the user-direct reads and writes with damon_sysfs_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: use a stable FDB dst snapshot in RCU readers
Local FDB entries can be rewritten in place by `fdb_delete_local()`, which
updates `f->dst` to another port or to `NULL` while keeping the entry
alive. Several bridge RCU readers inspect `f->dst`, including
`br_fdb_fillbuf()` through the `brforward_read()` sysfs path.
These readers currently load `f->dst` multiple times and can therefore
observe inconsistent values across the check and later dereference.
In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change
`f->dst` after the NULL check and before the `port_no` dereference,
leading to a NULL-ptr-deref.
Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each
affected RCU reader and using that snapshot for the rest of the access
sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()`
with `WRITE_ONCE()` so the readers and writer use matching access patterns. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - snapshot IV for async AEAD requests
AF_ALG AEAD AIO requests currently use the socket-wide IV buffer during
request processing. For async requests, later socket activity can
update that shared state before the original request has fully
completed, which can lead to inconsistent IV handling.
Snapshot the IV into per-request storage when preparing the AEAD
request, so in-flight operations no longer depend on mutable socket
state. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix deferred split queue races during migration
migrate_folio_move() records the deferred split queue state from src and
replays it on dst. Replaying it after remove_migration_ptes(src, dst, 0)
makes dst visible before it is requeued, so a concurrent rmap-removal path
can mark dst partially mapped and trip the WARN in deferred_split_folio().
Move the requeue before remove_migration_ptes() so dst is back on the
deferred split queue before it becomes visible again.
Because migration still holds dst locked at that point, teach
deferred_split_scan() to requeue a folio when folio_trylock() fails.
Otherwise a fully mapped underused folio can be dequeued by the shrinker
and silently lost from split_queue.
[ziy@nvidia.com: move the comment] |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Sync interrupt shadow to cached vmcb12 after VMRUN of L2
After VMRUN in guest mode, nested_sync_control_from_vmcb02() syncs
fields written by the CPU from vmcb02 to the cached vmcb12. This is
because the cached vmcb12 is used as the authoritative copy of some of
the controls, and is the payload when saving/restoring nested state.
int_state is also written by the CPU, specifically bit 0 (i.e.
SVM_INTERRUPT_SHADOW_MASK) for nested VMs, but it is not sync'd to
cached vmcb12. This does not cause a problem if KVM_SET_NESTED_STATE
preceeds KVM_SET_VCPU_EVENTS in the restore path, as an interrupt shadow
would be correctly restored to vmcb02 (KVM_SET_VCPU_EVENTS overwrites
what KVM_SET_NESTED_STATE restored in int_state).
However, if KVM_SET_VCPU_EVENTS preceeds KVM_SET_NESTED_STATE, an
interrupt shadow would be restored into vmcb01 instead of vmcb02. This
would mostly be benign for L1 (delays an interrupt), but not for L2. For
L2, the vCPU could hang (e.g. if a wakeup interrupt is delivered before
a HLT that should have been in an interrupt shadow).
Sync int_state to the cached vmcb12 in nested_sync_control_from_vmcb02()
to avoid this problem. With that, KVM_SET_NESTED_STATE restores the
correct interrupt shadow state, and if KVM_SET_VCPU_EVENTS follows it
would overwrite it with the same value. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't set EXT4_GET_BLOCKS_CONVERT when splitting before submitting I/O
When allocating blocks during within-EOF DIO and writeback with
dioread_nolock enabled, EXT4_GET_BLOCKS_PRE_IO was set to split an
existing large unwritten extent. However, EXT4_GET_BLOCKS_CONVERT was
set when calling ext4_split_convert_extents(), which may potentially
result in stale data issues.
Assume we have an unwritten extent, and then DIO writes the second half.
[UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUUUUUU] extent status tree
|<- ->| ----> dio write this range
First, ext4_iomap_alloc() call ext4_map_blocks() with
EXT4_GET_BLOCKS_PRE_IO, EXT4_GET_BLOCKS_UNWRIT_EXT and
EXT4_GET_BLOCKS_CREATE flags set. ext4_map_blocks() find this extent and
call ext4_split_convert_extents() with EXT4_GET_BLOCKS_CONVERT and the
above flags set.
Then, ext4_split_convert_extents() calls ext4_split_extent() with
EXT4_EXT_MAY_ZEROOUT, EXT4_EXT_MARK_UNWRIT2 and EXT4_EXT_DATA_VALID2
flags set, and it calls ext4_split_extent_at() to split the second half
with EXT4_EXT_DATA_VALID2, EXT4_EXT_MARK_UNWRIT1, EXT4_EXT_MAY_ZEROOUT
and EXT4_EXT_MARK_UNWRIT2 flags set. However, ext4_split_extent_at()
failed to insert extent since a temporary lack -ENOSPC. It zeroes out
the first half but convert the entire on-disk extent to written since
the EXT4_EXT_DATA_VALID2 flag set, but left the second half as unwritten
in the extent status tree.
[0000000000SSSSSS] data S: stale data, 0: zeroed
[WWWWWWWWWWWWWWWW] on-disk extent W: written extent
[WWWWWWWWWWUUUUUU] extent status tree
Finally, if the DIO failed to write data to the disk, the stale data in
the second half will be exposed once the cached extent entry is gone.
Fix this issue by not passing EXT4_GET_BLOCKS_CONVERT when splitting
an unwritten extent before submitting I/O, and make
ext4_split_convert_extents() to zero out the entire extent range
to zero for this case, and also mark the extent in the extent status
tree for consistency. |
| In server mode pgAdmin 4 validates a path into the user's storage directory with check_access_permission(), which builds the absolute path with get_abs_path(). Several callers then acted on a path they built differently, so the path checked and the path used could name different files:
- Opening a file in the Query Tool, the Google client secret and, on Windows, Import/Export Data, Backup, Restore and saving a file joined the path to the storage directory after stripping leading slashes and backslashes. On POSIX a path checked as a name inside storage could become an absolute path once stripped, so any file the pgAdmin account can read could be opened; on Windows a path naming a drive discarded the storage directory, so these could read, or write, outside it.
- Listing a folder decoded the path a second time after the check, so a folder named like an encoded "..", which a user can create, listed any directory on the host.
- Download, delete, rename and the file-exists check appended the path to the storage directory without a separator, so in a deployment where one user's storage directory name is a prefix of another's, another user's files could be read, deleted or moved; download also checked the path appended to itself.
- Creating a folder could create one in another user's directory.
The fix makes check_access_permission() return the path it checked and every caller act on that path, decodes folder paths once, and opens, deletes and renames files relative to directories opened from the storage directory without following symbolic links. Desktop mode is not affected.
This issue affects pgAdmin 4: before 9.19. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: don't hide a link from cancellations
A task that exits cancels its tracked requests and waits until they are
gone. io_uring_cancel_generic() looks everywhere a request can be, and
goes to sleep if it found nothing to cancel. It is woken up each time
one of the requests of the task is completed by task work or freed.
When io-wq is done with a request that has a link, there is a time in which
the next request of the link can't be found:
io_worker_handle_work()
io_assign_current_work(worker, NULL)
io_wq_free_work(work)
io_req_find_next() // takes the link off the request
io_free_req() // task work for the task
io_assign_current_work(worker, linked)
io_run_task_work()
cond_resched()
worker->cur_work = linked
It is not pending, it is not the current work of a worker, and it is not
yet on the list that it is about to be parked on. If the pass that the
exiting task makes because of io_free_req() falls into that time, it finds
nothing and the task goes to sleep. The worker then runs the link, which
IO_WQ_BIT_EXIT doesn't prevent for bounded work. If that parks the request
nothing is completed or freed, and nobody wakes up the task. If it is the
process that exits it can't be killed any more either.
NOP, IOSQE_ASYNC | IOSQE_IO_LINK
FUTEX_WAIT, FUTEX2_PRIVATE
exit of the thread, or of the process, up to 63us later
With four of these per round 5 to 8 of 10,000 rounds hang (4 CPUs, KVM):
io_uring_cancel_generic
do_exit
Commit f8b632e89a10 ("io_uring: tighten task exit cancellations") is about
the same gap, and makes the task look again for whatever happens before
io_free_req().
Free the request once the link is the current work of the worker, or
pending. Whoever is woken up by that can find the link, until it is parked
where cancellations look as well. To do so split io_wq_free_work() in two. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: don't lose the signal that ends work
When a thread exits, only its tracked requests are cancelled. Then its
io-wq is torn down. io_wq_exit_workers() signals every worker, to get it
out of an interruptible sleep, and waits for all of them to exit. Before
they do, they go through the work that is left. Unbounded work is
cancelled. Bounded work is run, as it is expected to end by itself.
Not all of it does. An open has no file yet, so it counts as bounded, and
the open of a FIFO waits for the other end. That is what the signal is for.
But the workers are signalled once, and a worker that hasn't started the
work by then loses the signal:
io_wq_exit_workers() io_worker_handle_work()
io_wq_worker_wake()
set TIF_NOTIFY_SIGNAL
io_assign_current_work()
io_run_task_work()
clear TIF_NOTIFY_SIGNAL
io_wq_submit_work()
fifo_open()
wait_for_partner()
wait_for_completion_timeout()
The thread never gets out of do_exit():
IORING_OP_OPENAT of a FIFO without a writer, IOSQE_ASYNC
exit of the thread that has submitted it
hangs in more than 9 of 10 attempts (4 CPUs, KVM), until the process is
killed.
Set TIF_NOTIFY_SIGNAL for bounded work that is started with IO_WQ_BIT_EXIT
set. The bit is set before the workers are signalled, and it is tested
after the flag has been cleared, with clear_notify_signal() providing the
barrier. So either the flag stays, or the bit is seen.
Work that is started while the io-wq exits is treated like work that is
being run at that time: it isn't interrupted unless it waits
interruptibly. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: search every core slot when looking up a scheduler
sched_to_core() walks rdev->cores[] up to rdev->num_cores, and
rocket_remove() decrements num_cores for every core it removes. Unbind a
core that is not the last one and the cores behind it fall outside the
search, so sched_to_core() returns NULL for a core that is still bound and
still running jobs. Neither caller checks the result:
rocket_job_run(): rocket_fence_create(core), core->dev
rocket_job_timedout(): dev_err(core->dev, "NPU job timed out")
Unbinding the middle core of the three on an RK3588 while three clients are
submitting to all of them faults twice, once from the surviving core's
job queue and once from its reset work:
KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227]
Workqueue: fdad0000.npu drm_sched_run_job_work [gpu_sched]
pc : rocket_job_run+0x234/0x838 [rocket]
Call trace:
rocket_job_run+0x234/0x838 [rocket]
drm_sched_run_job_work+0x2cc/0xad8 [gpu_sched]
process_one_work+0x640/0x14f0
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: rocket-reset-2 drm_sched_job_timedout [gpu_sched]
pc : rocket_job_timedout+0xf0/0x1e0 [rocket]
Call trace:
rocket_job_timedout+0xf0/0x1e0 [rocket]
drm_sched_job_timedout+0x188/0x6a0 [gpu_sched]
Both are the third core: the workqueue names are its device and its
core->index, and it was left at slot 2 while num_cores had dropped to 2.
Search all the slots that were allocated, the way find_core_for_dev() now
does. A core that is still bound is then found, and the two callers get
the pointer they already assume they have.
This does not make unbinding one core out of several safe. An open client
keeps an entity pointing at the scheduler of the core that went away:
drm_sched reports it as not ready for every job that lands on it, and the
client waits in dma_fence_default_wait for a fence that will never signal.
Stopping the NULL dereference is what belongs in a fix; the rest wants
more thought. |
| LibreTV before v2.21.2 contains a server-side request forgery vulnerability that allows authenticated users to bypass checkUpstreamAllowed() by exploiting unpinned DNS resolution in fetchWithSafeRedirects(). Attackers controlling authoritative DNS can return public addresses during validation and internal addresses at connection time via /api/source/test, /api/proxy, /api/search or /api/detail to reach loopback services, private hosts or cloud metadata endpoints. |
| A time-of-check to time-of-use race condition in the SafeNet Authentication Client (SAC) SACSrv log-cleanup function can allow an authenticated, non-administrator local user to redirect a privileged file deletion operation outside the intended log
directory.
This issue affects SAC releases up to and including 10.9 R3 GA (build 10.9.7449). |
| Improper input validation in the beacon handler for WF200 firmware versions 3.17.0 and earlier may result in a divide-by-zero fault. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: nau8821: Cancel delayed work on component remove
Attempting to unload the driver while a jack detection work is pending
would likely crash the kernel when it is eventually scheduled for
execution:
[ 1984.896308] BUG: unable to handle page fault for address: ffffffffc10c2a20
[...]
[ 1984.896388] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024
[ 1984.896396] Workqueue: events nau8821_jdet_work [snd_soc_nau8821]
[ 1984.896414] RIP: 0010:__mutex_lock+0x9f/0x11d0
[...]
[ 1984.896504] Call Trace:
[ 1984.896511] <TASK>
[ 1984.896524] ? snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core]
[ 1984.896572] ? snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core]
[ 1984.896596] snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core]
[ 1984.896622] nau8821_jdet_work+0xeb/0x1e0 [snd_soc_nau8821]
[ 1984.896636] process_one_work+0x211/0x590
[ 1984.896649] ? srso_return_thunk+0x5/0x5f
[ 1984.896670] worker_thread+0x1cd/0x3a0
Cancel unscheduled jdet_work or wait for its execution to finish before
the component driver gets removed. |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: core - use RCU and work_struct to fix race condition
Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread
exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex
lock, a concurrent hwrng_unregister() may call kthread_stop() again on
the same task.
Additionally, if hwrng_unregister() is called immediately after
hwrng_register(), the stopped thread may have never been executed. Thus,
hwrng_fill remains dirty even after hwrng_unregister() returns. In this
case, subsequent calls to hwrng_register() will fail to start new
threads, and hwrng_unregister() will call kthread_stop() on the same
freed task. In both cases, a use-after-free occurs:
refcount_t: addition on 0; use-after-free.
WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0
Call Trace:
kthread_stop+0x181/0x360
hwrng_unregister+0x288/0x380
virtrng_remove+0xe3/0x200
This patch fixes the race by protecting the global hwrng_fill pointer
inside the rng_mutex lock, so that hwrng_fillfn() thread is stopped only
once, and calls to kthread_run() and kthread_stop() are serialized
with the lock held.
To avoid deadlock in hwrng_fillfn() while being stopped with the lock
held, we convert current_rng to RCU, so that get_current_rng() can read
current_rng without holding the lock. To remove the lock from put_rng(),
we also delay the actual cleanup into a work_struct.
Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR()
checks are removed from its callers.
With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can no
longer clear hwrng_fill itself. Therefore, if hwrng_fillfn() returns
directly after current_rng is dropped, kthread_stop() would be called on
a freed task_struct later. To fix this, hwrng_fillfn() calls schedule()
now to keep the task alive until being stopped. The kthread_stop() call
is also moved from hwrng_unregister() to drop_current_rng(), ensuring
kthread_stop() is called on all possible paths where current_rng becomes
NULL, so that the thread would not wait forever. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: do not keep dest_dst if dev is going down
There is race between the netdev notifier ip_vs_dst_event()
and the code that caches dst with dev that is going down.
As the FIB can be notified for the closed device after our
handler finishes, it is possible valid route to be returned
and cached resuling in a leaked dev reference until the dest
is not removed.
To prevent new dest_dst to be attached to dest just after the
handler dropped the old one, add a netif_running() check
to make sure the notifier handler is not currently running
for device that is closing. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: fix ip_rt_bug race in icmp_route_lookup reverse path
icmp_route_lookup() performs multiple route lookups to find a suitable
route for sending ICMP error messages, with special handling for XFRM
(IPsec) policies.
The lookup sequence is:
1. First, lookup output route for ICMP reply (dst = original src)
2. Pass through xfrm_lookup() for policy check
3. If blocked (-EPERM) or dst is not local, enter "reverse path"
4. In reverse path, call xfrm_decode_session_reverse() to get fl4_dec
which reverses the original packet's flow (saddr<->daddr swapped)
5. If fl4_dec.saddr is local (we are the original destination), use
__ip_route_output_key() for output route lookup
6. If fl4_dec.saddr is NOT local (we are a forwarding node), use
ip_route_input() to simulate the reverse packet's input path
7. Finally, pass rt2 through xfrm_lookup() with XFRM_LOOKUP_ICMP flag
The bug occurs in step 6: ip_route_input() is called with fl4_dec.daddr
(original packet's source) as destination. If this address becomes local
between the initial check and ip_route_input() call (e.g., due to
concurrent "ip addr add"), ip_route_input() returns a LOCAL route with
dst.output set to ip_rt_bug.
This route is then used for ICMP output, causing dst_output() to call
ip_rt_bug(), triggering a WARN_ON:
------------[ cut here ]------------
WARNING: net/ipv4/route.c:1275 at ip_rt_bug+0x21/0x30, CPU#1
Call Trace:
<TASK>
ip_push_pending_frames+0x202/0x240
icmp_push_reply+0x30d/0x430
__icmp_send+0x1149/0x24f0
ip_options_compile+0xa2/0xd0
ip_rcv_finish_core+0x829/0x1950
ip_rcv+0x2d7/0x420
__netif_receive_skb_one_core+0x185/0x1f0
netif_receive_skb+0x90/0x450
tun_get_user+0x3413/0x3fb0
tun_chr_write_iter+0xe4/0x220
...
Fix this by checking rt2->rt_type after ip_route_input(). If it's
RTN_LOCAL, the route cannot be used for output, so treat it as an error.
The reproducer requires kernel modification to widen the race window,
making it unsuitable as a selftest. It is available at:
https://gist.github.com/mrpre/eae853b72ac6a750f5d45d64ddac1e81 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: drop extent cache after doing PARTIAL_VALID1 zeroout
When splitting an unwritten extent in the middle and converting it to
initialized in ext4_split_extent() with the EXT4_EXT_MAY_ZEROOUT and
EXT4_EXT_DATA_VALID2 flags set, it could leave a stale unwritten extent.
Assume we have an unwritten file and buffered write in the middle of it
without dioread_nolock enabled, it will allocate blocks as written
extent.
0 A B N
[UUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUU] extent status tree
[--DDDDDDDD--] D: valid data
|<- ->| ----> this range needs to be initialized
ext4_split_extent() first try to split this extent at B with
EXT4_EXT_DATA_PARTIAL_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but
ext4_split_extent_at() failed to split this extent due to temporary lack
of space. It zeroout B to N and leave the entire extent as unwritten.
0 A B N
[UUUUUUUUUUUU] on-disk extent
[UUUUUUUUUUUU] extent status tree
[--DDDDDDDDZZ] Z: zeroed data
ext4_split_extent() then try to split this extent at A with
EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and
leave an written extent from A to N.
0 A B N
[UUWWWWWWWWWW] on-disk extent W: written extent
[UUUUUUUUUUUU] extent status tree
[--DDDDDDDDZZ]
Finally ext4_map_create_blocks() only insert extent A to B to the extent
status tree, and leave an stale unwritten extent in the status tree.
0 A B N
[UUWWWWWWWWWW] on-disk extent W: written extent
[UUWWWWWWWWUU] extent status tree
[--DDDDDDDDZZ]
Fix this issue by always cached extent status entry after zeroing out
the second part. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_osf: fix divide-by-zero in OSF_WSS_MODULO
nf_osf_match_one() computes ctx->window % f->wss.val in the
OSF_WSS_MODULO branch with no guard for f->wss.val == 0. A
CAP_NET_ADMIN user can add such a fingerprint via nfnetlink; a
subsequent matching TCP SYN divides by zero and panics the kernel.
Reject the bogus fingerprint in nfnl_osf_add_callback() above the
per-option for-loop. f->wss is per-fingerprint, not per-option, so
the check must run regardless of f->opt_num (including 0). Also
reject wss.wc >= OSF_WSS_MAX; nf_osf_match_one() already treats that
as "should not happen".
Crash:
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
<IRQ>
nf_osf_match (net/netfilter/nfnetlink_osf.c:220)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:348)
nf_hook_slow (net/netfilter/core.c:622)
ip_local_deliver (net/ipv4/ip_input.c:265)
ip_rcv (include/linux/skbuff.h:1162)
__netif_receive_skb_one_core (net/core/dev.c:6181)
process_backlog (net/core/dev.c:6642)
__napi_poll (net/core/dev.c:7710)
net_rx_action (net/core/dev.c:7945)
handle_softirqs (kernel/softirq.c:622) |
