| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Power Systems Firmware FW1060.00 through FW1060.81, OP940.00 through OP940.A2, OP910.00 through OP910.95, and OP940.00 through OP940.82 could allow a remote attacker to cause a denial of service due to improper validation of input length. |
| IBM QRadar 7.5.0 through 7.5.0 Update Pack 16 Interim Fix 02, and 7.6.0.0 through 7.6.0.5 is vulnerable to Open Redirect. A victim must open a specifically crafted URL while authenticated to QRadar to trigger this. |
| ZEBRA is a Zcash node written entirely in Rust. Prior to 4.5.0, a natural or attacker-influenced chain fork can leave stale Sapling and Orchard note-commitment subtree roots in Zebra state. In zebra-state/src/service/non_finalized_state/chain.rs, Chain::pop_tip removed a reverted tip block but did not remove subtree entries whose end_height belonged to that block, unlike the cleanup performed by pop_root. When the winning fork later finalized, the abandoned branch's stale subtree data could be written to RocksDB and survive node restarts. The corrupted history can cause z_getsubtreesbyindex consumers such as lightwalletd and light wallets to receive incorrect subtree roots, producing wallet synchronization failures or incorrect wallet state and requiring a full state rebuild for recovery. This issue is fixed in version 4.5.0. |
| Temporal Server does not bind a workflow-history pagination token to the namespace and workflow named in the request that presents it. GetWorkflowExecutionHistory and GetWorkflowExecutionHistoryReverse authorize the caller against the namespace in the request, then select history from the branch recorded inside the caller-supplied next_page_token. The normal history continuation carries a run identifier, event bounds, a persistence cursor, and a branch token, but no namespace or workflow identity, and it is serialized as unauthenticated protobuf bytes. An authenticated caller holding read permission on one namespace, together with a genuine non-final continuation issued earlier for a workflow in a second namespace, can submit that continuation with a request naming the first namespace and receive the second namespace's workflow history, provided the supplied workflow identifier selects the same History shard as the continuation's branch. No workflow with the supplied identifier needs to exist. Because the token is unauthenticated, a holder can also advance its event range and clear its persistence cursor, which returns history events created after that caller's current credential no longer granted access to the continuation's namespace. Determining exposure is a version question rather than a configuration question: every release listed as affected omits the binding check on the forward history path, and on the reverse history path in releases from 1.16.0, which introduced GetWorkflowExecutionHistoryReverse; no setting in an affected release restores it, and affected releases emit no metric or log for the condition, so their telemetry provides no detection. Fixed releases add the check and, when a page token's branch token is not the requested execution's current branch token, record the counter pagination_token_branch_mismatch tagged with namespace and reason and write a History-service warning log reading "Pagination branch token is not the execution's current branch token" with the fields wf-namespace, wf-id, wf-run-id, reason, wf-branch-token, and wf-request-branch-token. Search History warning logs for that message, or for reason=foreign_branch, which denotes a branch token the requested execution never recorded and is not expected in normal operation; reason=non_current_branch denotes a retained but superseded branch of the same execution and can occur legitimately after conflict resolution or failover. A foreign_branch record does not by itself prove the read was refused, because the counter and log are emitted before the enforcement decision and therefore appear both when the check rejects the request and when history.enablePaginationTokenBranchValidationShadowMode is enabled and the read is served; confirm refusal from the gRPC response, which is InvalidArgument carrying a CurrentBranchChangedFailure detail. The metric and log are tagged with the requesting namespace, not the namespace whose history the token selects, so a foreign_branch alert does not name the exposed namespace. The issue does not provide unauthenticated access, construction of a usable continuation from public workflow identifiers, enumeration of workflows for which the caller holds no continuation, or any modification of workflow state. |
| This issue was addressed with improved handling of symlinks. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to access user-sensitive data. |
| Wails is a framework for building desktop applications using Go and web technologies. From 2.0.0 until 2.13.0, BindingsAllowedOrigins in v2/internal/frontend/originvalidator/originValidator.go passes wildcard patterns to wildcardPatternToRegex, which expands every asterisk to an unrestricted regular-expression match. When an application configures a trailing or partial-label wildcard immediately after an allowed domain, an attacker-controlled lookalike origin can match the allowed suffix and invoke bound Go methods through IPC. A complete-component subdomain wildcard is an unaffected configuration. The resulting confidentiality, integrity, and availability impact depends on the file, database, command, credential, or other operations exposed by the application's bound methods. This issue is fixed in version 2.13.0. |
| CGI versions before 5.00 for Perl allow open redirects via HTML entity decoding of the URL after application validation in redirect.
redirect decodes HTML entities in its URL before writing the Location header, so a URL the application has already validated can change meaning. For example, //evil.example/ becomes //evil.example/ and sends the user to another host. |
| CGI versions before 5.00 for Perl allow open redirects and script injection via URLs built from REQUEST_URI in url and start_form.
url(-absolute=>1), url(-relative=>1) and the default start_form action are built from the client-supplied REQUEST_URI without validation. The result can be protocol-relative (//evil.example), absolute-form (http://evil.example/) or contain backslashes, and url(-relative=>1) can return a javascript: URL. Links and form posts built from these URLs can go to another host. |
| CGI versions before 5.00 for Perl trust the client X-Forwarded-Host header in url, self_url, virtual_host and virtual_port.
These take the host name and port from the X-Forwarded-Host request header when present, and otherwise from Host, without validating either. The URLs from url and self_url are the default redirect location and the start_html(-base=>1) base href, and the default start_form action when REQUEST_URI is not set.
A client can poison shared caches, and URLs the application stores or sends, with redirects, links and scripts that point at a host it controls. |
| CGI::Cookie versions from 4.67 before 5.00 for Perl allow denial of service via the client cookie expires value used as a regex in parse.
CGI's cookie method reads the Cookie request header through parse, which interpolates the header's expires value unescaped into the substitution pattern that removes it from the cookie string.
A client can make the request die with an invalid pattern, or tie up the process with one that backtracks catastrophically. |
| JupyterLab Desktop is the cross-platform desktop application for JupyterLab. Prior to 4.6.2-1, JupyterLab Desktop for macOS declared the com.apple.security.cs.allow-dyld-environment-variables entitlement, allowing the dynamic linker to honor DYLD_INSERT_LIBRARIES despite the hardened runtime. An attacker who can already execute code as the current user can load an arbitrary dynamic library into the JupyterLab Desktop process and inherit TCC permissions previously granted to the application, including access to protected Documents, Desktop, or Downloads folders without another macOS prompt. Exploitation requires existing local code execution and prior TCC grants; it does not provide initial or remote code execution. Windows and Linux are not affected. This vulnerability is fixed in 4.6.2-1. |
| The mechanism binding files generated during a shredding process to the authentication method is not working correctly and the same session token is used for all token-based API users. This is similar to an issue fixed in 2026.7.1 but was missed while creating the fix. Since the files are referred to by randomly generated UUIDs and only exist for a day, there is virtually no risk, but it renders the added protection mechanism useless. As part of the fix, we have also improved hardening of some other related code areas. |
| Incorrect quota accounting in Progress Software WS_FTP Server releases prior to 2025.0.5 on Windows could allow an authenticated user with upload and delete permissions to exceed storage quotas, potentially causing denial of service. |
| Jpom through 2.11.12 fails to validate workspace ownership when resolving repositoryId on the /build/branch-list endpoint, allowing authenticated users to access repositories from other workspaces. Attackers can submit repository identifiers from different workspaces to enumerate repository existence, determine repository type, and execute git ls-remote commands using other workspaces' stored credentials. |
| Jpom through 2.11.12 contains an authorization bypass vulnerability in SshFileController that allows authenticated workspace users to access SSH hosts belonging to other workspaces by supplying foreign SSH asset ids. Attackers with SSH file permissions in any workspace can call download, upload, read_file_data.json, update_file_data.json, delete.json, rename.json and new_file_folder.json endpoints to read, modify and delete files on other workspaces' SSH hosts. |
| Immich is a self-hosted photo and video management solution. Prior to 3.0.3, an authenticated user with editor access to a shared album can change the existing owner's role because album member role updates do not protect the owner from modification. By demoting the owner and then promoting themselves, an editor can take ownership of the album, remove the original owner, and delete the album. This vulnerability is fixed in version 3.0.3. |
| Authorizer before 2.4.2 contains a password reset poisoning vulnerability that allows unauthenticated attackers to control emailed link hosts by supplying x-authorizer-url gRPC metadata. Attackers can send this metadata to the gRPC port or a Grpc-Metadata-X-Authorizer-Url header through the REST gateway to capture reset or magic-link tokens and take over accounts. |
| LXC is a userspace interface for the Linux kernel containment features used to create and manage system containers. In LXC 7.0.0 and earlier, lxc-copy and the public liblxc clone() API can follow attacker-controlled symbolic links while updating /etc/hostname in a copied container root filesystem. The affected surfaces are lxc-copy and liblxc's public lxc_container::clone() API. The privileged cloning process must run as root. The source rootfs must be attacker-controlled or less trusted. A symlink can be placed at etc/hostname or in an intermediate component. The clone operation preserves the symlink before updating the hostname. The vulnerable write truncates and overwrites an existing file outside the destination rootfs. When root clones an untrusted container without LXC_CLONE_KEEPNAME, the copied symlink can resolve outside the destination rootfs and cause the privileged process to overwrite an existing host file with the destination container name. Unprivileged use and managers with independent cloning implementations are not affected. LXC_CLONE_KEEPNAME avoids the hostname update and therefore the affected write. |
| In enableSystemPackageLPw of Settings.java, there is a possible way to prevent location access from working due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In onChange of BiometricService.java, there is a possible way to enable fingerprint unlock due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
