| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Bluetooth Link Layer control procedure code in subsys/bluetooth/controller/ll_sw/ull_llcp_conn_upd.c retains the received RX node while a Connection Update / Connection Parameter procedure waits for its instant, so the node can later carry the host notification (llcp_rx_node_retain(), which marks it NODE_RX_TYPE_RETAIN and thereby suppresses the normal recycling in ull.c). The default: arm of llcp_rp_cu_rx() and llcp_lp_cu_rx() — the "invalid PDU, terminate the connection" path — completed the procedure without releasing that retained node. llcp_rr_check_done() then dequeued and freed the procedure context with ctx->node_ref.rx still pointing at the retained node, dropping the last reference to it.
A peer device in radio range can reach this without pairing, bonding, or encryption. Against a peripheral, the peer sends a well-formed LL_CONNECTION_UPDATE_IND with an instant a few connection events in the future (the node is retained and the procedure enters RP_CU_STATE_WAIT_INSTANT), then, before the instant is reached, sends any other LL Control PDU such as LL_LENGTH_REQ. ull_cp_rx() routes that PDU into the active remote Connection Update procedure, which takes the invalid-PDU path. The central role is reachable symmetrically after accepting an LL_CONNECTION_PARAM_REQ, and the local-procedure variant is reachable with LL_REJECT_IND.
With CONFIG_BT_CTLR_ASSERT_DEBUG enabled (its default), the resulting state violates the invariant asserted in llcp_rr_check_done(), so the two-PDU sequence produces an immediate fatal error in the controller. With those asserts disabled, each occurrence permanently loses one node from the controller's small fixed RX pool (sized from CONFIG_BT_CTLR_RX_BUFFERS, which defaults to 1); repeating the sequence across reconnections exhausts the pool, after which the link-layer receive path operates on a NULL node. The impact is an unauthenticated, remotely triggerable denial of service persisting until reboot; there is no memory-disclosure or memory-corruption consequence, since the leaked node simply becomes unreachable. |
| The Bluetooth Link Layer Control Procedure (LLCP) implementation for Connected Isochronous Stream (CIS) creation retains an RX node (ctx->node_ref.rx, marked NODE_RX_TYPE_RETAIN) so it can later be reused as the host notification — on the peripheral while awaiting the Host's reply to an LL_CIS_REQ, and on the central for the whole duration of a locally initiated CIS Create. In subsys/bluetooth/controller/ll_sw/ull_llcp_cc.c, the "invalid PDU received" paths of llcp_rp_cc_rx() and llcp_lp_cc_rx() terminated the connection and completed the procedure without releasing that retained node, breaking the invariant checked in llcp_lr_check_done() and llcp_rr_check_done() and orphaning the node's memory.
A peer device within radio range can reach this with a single extra LL Control PDU on an unauthenticated, unencrypted ACL link. Against a peripheral, the attacker sends a valid LL_CIS_REQ and then, before the Host replies, any unrelated LL Control PDU (for example LL_VERSION_IND), which ull_cp_rx() routes into the active remote procedure. Against a central performing a CIS Create, a malicious peripheral answers with LL_UNKNOWN_RSP for CIS_REQ, which is dispatched into the active local procedure. No pairing, encryption or user interaction is required; the code is compiled in when CONFIG_BT_CTLR_PERIPHERAL_ISO or CONFIG_BT_CTLR_CENTRAL_ISO is enabled.
In default builds (CONFIG_BT_CTLR_ASSERT_DEBUG is default y) the retained-node assertion fires immediately, producing a controller fatal error and, typically, a system reset from one injected PDU. With the development assertions disabled, each attempt permanently loses one node from the controller's small LL notification pool (LL_PDU_RX_CNT, 2 * CONFIG_BT_CTLR_LLCP_CONN) together with its memq_link_t; repeating the connect-attack-reconnect cycle exhausts the pool, after which notification allocation always fails, RX flow control stalls, and the non-disableable LL_ASSERT_ERR() in llcp_lp_cc_flush() faults. The impact is limited to availability — the leaked node is orphaned, never reused or double-freed — and recovery requires a reboot. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: Purge async_hold in tls_decrypt_async_wait()
The async_hold queue pins encrypted input skbs while
the AEAD engine references their scatterlist data. Once
tls_decrypt_async_wait() returns, every AEAD operation
has completed and the engine no longer references those
skbs, so they can be freed unconditionally.
A subsequent patch adds batch async decryption to
tls_sw_read_sock(), introducing a new call site that
must drain pending AEAD operations and release held
skbs. Move __skb_queue_purge(&ctx->async_hold) into
tls_decrypt_async_wait() so the purge is centralized
and every caller -- recvmsg's drain path, the -EBUSY
fallback in tls_do_decryption(), and the new read_sock
batch path -- releases held skbs on synchronization
without each site managing the purge independently.
This fixes a leak when tls_strp_msg_hold() fails part-way through,
after having added some cloned skbs to the async_hold
queue. tls_decrypt_sg() will then call tls_decrypt_async_wait() to
process all pending decrypts, and drop back to synchronous mode, but
tls_sw_recvmsg() only flushes the async_hold queue when one record has
been processed in "fully-async" mode, which may not be the case here.
[pabeni@redhat.com: added leak comment] |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix memory leak of bio integrity
If nvmet receives commands with metadata there is a continuous memory
leak of kmalloc-128 slab or more precisely bio->bi_integrity.
Since commit bf4c89fc8797 ("block: don't call bio_uninit from bio_endio")
each user of bio_init has to use bio_uninit as well. Otherwise the bio
integrity is not getting free. Nvmet uses bio_init for inline bios.
Uninit the inline bio to complete deallocation of integrity in bio. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: sch_sfq: fix a potential crash on gso_skb handling
SFQ has an assumption of always being able to queue at least one packet.
However, after the blamed commit, sch->q.len can be inflated by packets
in sch->gso_skb, and an enqueue() on an empty SFQ qdisc can be followed
by an immediate drop.
Fix sfq_drop() to properly clear q->tail in this situation.
ip netns add lb
ip link add dev to-lb type veth peer name in-lb netns lb
ethtool -K to-lb tso off # force qdisc to requeue gso_skb
ip netns exec lb ethtool -K in-lb gro on # enable NAPI
ip link set dev to-lb up
ip -netns lb link set dev in-lb up
ip addr add dev to-lb 192.168.20.1/24
ip -netns lb addr add dev in-lb 192.168.20.2/24
tc qdisc replace dev to-lb root sfq limit 100
ip netns exec lb netserver
netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 & |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix memory leak in tipc_link_xmit
In case the backlog transmit queue for system-importance messages is overloaded,
tipc_link_xmit() returns -ENOBUFS but the skb list is not purged. This leads to
memory leak and failure when a skb is allocated.
This commit fixes this issue by purging the skb list before tipc_link_xmit()
returns. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: put dl_stid if fail to queue dl_recall
Before calling nfsd4_run_cb to queue dl_recall to the callback_wq, we
increment the reference count of dl_stid.
We expect that after the corresponding work_struct is processed, the
reference count of dl_stid will be decremented through the callback
function nfsd4_cb_recall_release.
However, if the call to nfsd4_run_cb fails, the incremented reference
count of dl_stid will not be decremented correspondingly, leading to the
following nfs4_stid leak:
unreferenced object 0xffff88812067b578 (size 344):
comm "nfsd", pid 2761, jiffies 4295044002 (age 5541.241s)
hex dump (first 32 bytes):
01 00 00 00 6b 6b 6b 6b b8 02 c0 e2 81 88 ff ff ....kkkk........
00 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 ad 4e ad de .kkkkkkk.....N..
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfsd4_process_open1+0x34/0x300
nfsd4_open+0x2d1/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
unreferenced object 0xffff8881499f4d28 (size 368):
comm "nfsd", pid 2761, jiffies 4295044005 (age 5541.239s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 30 4d 9f 49 81 88 ff ff ........0M.I....
30 4d 9f 49 81 88 ff ff 20 00 00 00 01 00 00 00 0M.I.... .......
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfs4_alloc_stid+0x29/0x210
alloc_init_deleg+0x92/0x2e0
nfs4_set_delegation+0x284/0xc00
nfs4_open_delegation+0x216/0x3f0
nfsd4_process_open2+0x2b3/0xee0
nfsd4_open+0x770/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
Fix it by checking the result of nfsd4_run_cb and call nfs4_put_stid if
fail to queue dl_recall. |
| In the Linux kernel, the following vulnerability has been resolved:
virt: tdx-guest: Just leak decrypted memory on unrecoverable errors
In CoCo VMs it is possible for the untrusted host to cause
set_memory_decrypted() to fail such that an error is returned
and the resulting memory is shared. Callers need to take care
to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional
or security issues.
Leak the decrypted memory when set_memory_decrypted() fails,
and don't need to print an error since set_memory_decrypted()
will call WARN_ONCE(). |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix out_fput in iommufd_fault_alloc()
As fput() calls the file->f_op->release op, where fault obj and ictx are
getting released, there is no need to release these two after fput() one
more time, which would result in imbalanced refcounts:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 48 PID: 2369 at lib/refcount.c:31 refcount_warn_saturate+0x60/0x230
Call trace:
refcount_warn_saturate+0x60/0x230 (P)
refcount_warn_saturate+0x60/0x230 (L)
iommufd_fault_fops_release+0x9c/0xe0 [iommufd]
...
VFS: Close: file count is 0 (f_op=iommufd_fops [iommufd])
WARNING: CPU: 48 PID: 2369 at fs/open.c:1507 filp_flush+0x3c/0xf0
Call trace:
filp_flush+0x3c/0xf0 (P)
filp_flush+0x3c/0xf0 (L)
__arm64_sys_close+0x34/0x98
...
imbalanced put on file reference count
WARNING: CPU: 48 PID: 2369 at fs/file.c:74 __file_ref_put+0x100/0x138
Call trace:
__file_ref_put+0x100/0x138 (P)
__file_ref_put+0x100/0x138 (L)
__fput_sync+0x4c/0xd0
Drop those two lines to fix the warnings above. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix skb_copy_ubufs() vs BIG TCP
David Ahern reported crashes in skb_copy_ubufs() caused by TCP tx zerocopy
using hugepages, and skb length bigger than ~68 KB.
skb_copy_ubufs() assumed it could copy all payload using up to
MAX_SKB_FRAGS order-0 pages.
This assumption broke when BIG TCP was able to put up to 512 KB per skb.
We did not hit this bug at Google because we use CONFIG_MAX_SKB_FRAGS=45
and limit gso_max_size to 180000.
A solution is to use higher order pages if needed.
v2: add missing __GFP_COMP, or we leak memory. |
| In the Linux kernel, the following vulnerability has been resolved:
PM / devfreq: Fix leak in devfreq_dev_release()
srcu_init_notifier_head() allocates resources that need to be released
with a srcu_cleanup_notifier_head() call.
Reported by kmemleak. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix memory leakage
This patch fixes potential memory leakage and seg fault
in _gpuvm_import_dmabuf() function |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: Fix possible leaked pernet namespace in smc_init()
In smc_init(), register_pernet_subsys(&smc_net_stat_ops) is called
without any error handling.
If it fails, registering of &smc_net_ops won't be reverted.
And if smc_nl_init() fails, &smc_net_stat_ops itself won't be reverted.
This leaves wild ops in subsystem linkedlist and when another module
tries to call register_pernet_operations() it triggers page fault:
BUG: unable to handle page fault for address: fffffbfff81b964c
RIP: 0010:register_pernet_operations+0x1b9/0x5f0
Call Trace:
<TASK>
register_pernet_subsys+0x29/0x40
ebtables_init+0x58/0x1000 [ebtables]
... |
| In the Linux kernel, the following vulnerability has been resolved:
memstick/mspro_block: fix handling of read-only devices
Use set_disk_ro to propagate the read-only state to the block layer
instead of checking for it in ->open and leaking a reference in case
of a read-only device. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Implement ref count for SRB
The timeout handler and the done function are racing. When
qla2x00_async_iocb_timeout() starts to run it can be preempted by the
normal response path (via the firmware?). qla24xx_async_gpsc_sp_done()
releases the SRB unconditionally. When scheduling back to
qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed
sp->qpair pointer:
qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21.
qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:21
qla2xxx [0000:83:00.0]-2854:0: Async-gpsc OUT WWPN 20:45:00:27:f8:75:33:00 speeds=2c00 speed=0400.
qla2xxx [0000:83:00.0]-28d8:0: qla24xx_handle_gpsc_event 50:06:0e:80:08:77:b6:21 DS 7 LS 6 rc 0 login 1|1 rscn 1|0 lid 5
BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
IP: qla24xx_async_abort_cmd+0x1b/0x1c0 [qla2xxx]
Obvious solution to this is to introduce a reference counter. One reference
is taken for the normal code path (the 'good' case) and one for the timeout
path. As we always race between the normal good case and the timeout/abort
handler we need to serialize it. Also we cannot assume any order between
the handlers. Since this is slow path we can use proper synchronization via
locks.
When we are able to cancel a timer (del_timer returns 1) we know there
can't be any error handling in progress because the timeout handler hasn't
expired yet, thus we can safely decrement the refcounter by one.
If we are not able to cancel the timer, we know an abort handler is
running. We have to make sure we call sp->done() in the abort handlers
before calling kref_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: fix cn20k mailbox lifetime on repeated rvu_mbox_init()
rvu_mbox_init() is called separately for AF-PF mailboxes during probe
and for AF-VF mailboxes when SR-IOV is enabled. Each call used to
allocate a new ng_rvu object, leaking the first allocation when the
pointer was overwritten on the second call.
Sharing one ng_rvu across both paths exposed several teardown bugs:
the error path freed all cn20k mailbox DMA and kfree()d ng_rvu even
when only the failing init type should be unwound, leaving live AF-PF
mailbox memory in use after an AF-VF init failure. mutex_init() was
also re-run on the AF-VF path while AF-PF mailbox handlers could still
hold rvu->mbox_lock. Probe and SR-IOV failure paths did not release
cn20k mailbox DMA either, since cleanup only happened in rvu_remove().
Allocate ng_rvu once with devm_kzalloc(), initialize mbox_lock in the
same block, unwind only the mailbox memory for the failing init type,
and free cn20k mailbox DMA from the probe and pci_enable_sriov()
error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix dma_vecs leak on p2p memory
We don't unmap P2P memory, so we don't need to track it. The dma_vec
allocation was getting leaked on the completion. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix dma mapping leak on data setup error
We're leaking the initial DMA mapping during iteration if we fail to
allocate the tracking descriptor for both PRP and SGL. Unmap the
iterator directly; we can't use the existing unmap helper because it
depends on the tracking descriptor being successfully allocated, so a
new one for an in-use iterator is provided.
The mappings were also leaking when the driver detects an invalid
bio_vec when mapping PRPs, so fix that too. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: button: Fix ACPI GPE handler leak during removal
Commit a7e23ec17fee ("ACPI: button: Install notifier for system events
as well") changed the ACPI notify handler type for ACPI buttons to
ACPI_ALL_NOTIFY, but it forgot to update acpi_button_remove() to reflect
that change. This leads to leaking the notify handler past driver
removal, which may cause a kernel crash to occur if ACPI notify on
the given device is triggered after removing the driver, and causes a
subsequent probe of the given device with the same driver to fail.
Address this by updating the acpi_remove_notify_handler() call in
acpi_button_remove() as appropriate. |
