| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: fix writes_pending and barrier reference leaks on write failures
raid1_make_request() acquires a writes_pending reference with
md_write_start() before calling raid1_write_request(). Several failure
paths in raid1_write_request() complete the bio and return without
reaching the normal write completion path, causing the corresponding
md_write_end() to be skipped.
Make raid1_write_request() return a status indicating whether the write
request was successfully queued. This allows raid1_make_request() to
call md_write_end() when raid1_write_request() fails.
Additionally, if wait_blocked_rdev() fails after wait_barrier()
succeeds, the associated barrier reference is not released.
Call allow_barrier() before returning from that path to keep the barrier
accounting balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending leak on write request failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before dispatching write requests. Several failure
paths in raid10_write_request() complete the bio and return without
reaching the normal write completion path, causing the corresponding
md_write_end() to be skipped.
Make raid10_write_request() return a status indicating whether the write
request was successfully queued. This allows raid10_make_request() to
release the writes_pending reference with md_write_end() when a write
request fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: igmp: Fix potential memory leaks in igmp_mod_timer() and igmp_stop_timer()
When a timer is deleted and not re-armed in igmp_mod_timer(), or stopped
in igmp_stop_timer(), the code currently decrements the reference counter
of the multicast list entry @im using refcount_dec(&im->refcnt).
However, both functions can be called from the RCU reader path:
- igmp_mod_timer() via igmp_heard_query() -> for_each_pmc_rcu()
- igmp_stop_timer() via igmp_rcv() -> igmp_heard_report()
If the group im was concurrently removed from the list by ip_mc_dec_group(),
its reference count might have already been decremented to 1.
In this case, timer_delete() succeeds, and refcount_dec() decrements
the refcount from 1 to 0. Since refcount_dec() does not free the object
when it hits 0 (unlike ip_ma_put()), the im structure is leaked.
Fix this by using ip_ma_put(im) instead of refcount_dec(&im->refcnt),
and deferring the put until after the spinlock is released. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix cifsFileInfo leak on kmalloc failure in deferred close drain paths
In cifs_close_deferred_file(), cifs_close_all_deferred_files(), and
cifs_close_deferred_file_under_dentry(), when a pending deferred close
is cancelled via cancel_delayed_work(), the subsequent kmalloc_obj() to
add the file to the local processing list may fail under memory pressure.
The loop breaks immediately, but the cancelled work is no longer pending
(it would have called _cifsFileInfo_put()), and the cfile is never added
to file_head for processing. The cifsFileInfo reference and the open
server handle both leak.
Fix by saving the cfile that failed allocation in a local variable,
breaking as before, and calling _cifsFileInfo_put() on it after
releasing the lock. Any files later in the iteration are unaffected
since their deferred work is still pending and will fire normally. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_printer: take kref only for successful open
printer_open() returns -EBUSY when the character device is already
open, but it increments dev->kref regardless of the return value. VFS
does not call ->release() for a failed open, so every rejected second
open permanently leaks one reference.
Move kref_get() into the successful-open branch. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: pppol2tp: hold reference to session in pppol2tp_ioctl()
pppol2tp_ioctl() read sock->sk->sk_user_data directly without any
locks or reference counting. If a controllable sleep was induced during
copy_from_user() (e.g. via a userfaultfd page fault sleep), a concurrent
socket close could trigger pppol2tp_session_close() asynchronously. This
frees the l2tp_session structure via the l2tp_session_del_work workqueue.
Upon resuming, the ioctl thread dereferences the stale session pointer,
resulting in a Use-After-Free (UAF).
Fix this by securely fetching the session reference using the RCU-safe,
refcounted helper pppol2tp_sock_to_session(sk) on entry. This locks the
session's refcount across the sleep. We structured the function to exit
via standard err breaks, guaranteeing that l2tp_session_put() is cleanly
called on all return paths to drop the reference.
To preserve existing behavior we validate the session and its magic
signature only for the specific L2TP commands that require it. This
ensures that generic/unknown ioctls called on an unconnected socket
still return -ENOIOCTLCMD and correctly fall back to generic handlers
(e.g. in sock_do_ioctl()). |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "net/smc: Introduce TCP ULP support"
This reverts commit d7cd421da9da2cc7b4d25b8537f66db5c8331c40.
As reported by Al Viro, the TCP ULP support for SMC is fundamentally
broken. The implementation attempts to convert an active TCP socket
into an SMC socket by modifying the underlying `struct file`, dentry,
and inode in-place, which violates core VFS invariants that assume
these structures are immutable for an open file, creating a risk of
use after free errors and general system instability.
Given the severity of this design flaw and the fact that cleaner
alternatives (e.g., LD_PRELOAD, BPF) exist for legacy application
transparency, the correct course of action is to remove this feature
entirely. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix fsck inconsistency caused by FGGC of node block
During FGGC node block migration, fsck may incorrectly treat the
migrated node block as fsync-written data.
The reproduction scenario:
root@vm:/mnt/f2fs# seq 1 2048 | xargs -n 1 ./test_sync // write inline inode and sync
root@vm:/mnt/f2fs# rm -f 1
root@vm:/mnt/f2fs# sync
root@vm:/mnt/f2fs# f2fs_io gc_range // move data block in sync mode and not write CP
SPO, "fsck --dry-run" find inode has already checkpointed but still
with DENT_BIT_SHIFT set
The root cause is that GC does not clear the dentry mark and fsync mark
during node block migration, leading fsck to misinterpret them as
user-issued fsync writes.
In BGGC mode, node block migration is handled by f2fs_sync_node_pages(),
which guarantees the dentry and fsync marks are cleared before writing.
This patch move the set/clear of the fsync|dentry marks into
__write_node_folio to make the logic clearer, and ensures the
fsync|dentry mark is cleared in FGGC. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ecm: Fix net_device lifecycle with device_move
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the bound flag is used to indicate whether the network device is shared
and pre-registered during the legacy driver's bind phase. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: icc-bwmon: Fix refcount imbalance seen during bwmon_remove
The following warning is seen during bwmon_remove due to refcount
imbalance, fix this by releasing the OPPs after use.
Logs:
WARNING: at drivers/opp/core.c:1640 _opp_table_kref_release+0x150/0x158
Hardware name: Qualcomm Technologies, Inc. X1E80100 CRD (DT)
...
Call trace:
_opp_table_kref_release+0x150/0x158
dev_pm_opp_remove_table+0x100/0x1b4
devm_pm_opp_of_table_release+0x10/0x1c
devm_action_release+0x14/0x20
devres_release_all+0xa4/0x104
device_unbind_cleanup+0x18/0x60
device_release_driver_internal+0x1ec/0x228
driver_detach+0x50/0x98
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
platform_driver_unregister+0x14/0x20
bwmon_driver_exit+0x18/0x524 [icc_bwmon]
__arm64_sys_delete_module+0x184/0x264
invoke_syscall+0x48/0x118
el0_svc_common.constprop.0+0xc8/0xe8
do_el0_svc+0x20/0x2c
el0_svc+0x34/0xdc
el0t_64_sync_handler+0x13c/0x158
el0t_64_sync+0x190/0x194
--[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: x86-android-tablets: Unregister devices in reverse order
Not all subsystems support a device getting removed while there are
still consumers of the device with a reference to the device.
One example of this is the regulator subsystem. If a regulator gets
unregistered while there are still drivers holding a reference
a WARN() at drivers/regulator/core.c:5829 triggers, e.g.:
WARNING: CPU: 1 PID: 1587 at drivers/regulator/core.c:5829 regulator_unregister
Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLADE_21.X64.0005.R00.1504101516 FFD8_X64_R_2015_04_10_1516 04/10/2015
RIP: 0010:regulator_unregister
Call Trace:
<TASK>
regulator_unregister
devres_release_group
i2c_device_remove
device_release_driver_internal
bus_remove_device
device_del
device_unregister
x86_android_tablet_remove
On the Lenovo Yoga Tablet 2 series the bq24190 charger chip also provides
a 5V boost converter output for powering USB devices connected to the micro
USB port, the bq24190-charger driver exports this as a Vbus regulator.
On the 830 (8") and 1050 ("10") models this regulator is controlled by
a platform_device and x86_android_tablet_remove() removes platform_device-s
before i2c_clients so the consumer gets removed first.
But on the 1380 (13") model there is a lc824206xa micro-USB switch
connected over I2C and the extcon driver for that controls the regulator.
The bq24190 i2c-client *must* be registered first, because that creates
the regulator with the lc824206xa listed as its consumer. If the regulator
has not been registered yet the lc824206xa driver will end up getting
a dummy regulator.
Since in this case both the regulator provider and consumer are I2C
devices, the only way to ensure that the consumer is unregistered first
is to unregister the I2C devices in reverse order of in which they were
created.
For consistency and to avoid similar problems in the future change
x86_android_tablet_remove() to unregister all device types in reverse
order. |
| A flaw was found in the OpenShift console. An authenticated console user can exploit a Server-Side Request Forgery (SSRF) vulnerability by providing a specially crafted Helm chart URL without proper validation. This allows the user to make the console pod fetch arbitrary URLs, potentially leading to the disclosure of sensitive information through error messages or enabling blind port scanning within the cluster. |
| In the Linux kernel, the following vulnerability has been resolved:
unshare: don't drop active namespace references that were never taken
Active references on the namespaces of an nsproxy are taken when the
nsproxy is installed into a task in switch_task_namespaces() and
copy_namespaces() and dropped again by put_nsproxy() through
deactivate_nsproxy().
But ksys_unshare() calls put_nsproxy() on an nsproxy that was never
installed when set_cred_ucounts() fails. The new namespaces of that
nsproxy go from zero to minus one and the namespaces shared with the
caller lose a reference that belongs to the nsproxy the caller keeps
using:
WARNING: kernel/nscommon.c:171 at __ns_ref_active_put+0x1cd/0x230
nsproxy_ns_active_put
deactivate_nsproxy
ksys_unshare
Afterwards the namespaces the caller lives in aren't listed by listns()
anymore. set_cred_ucounts() only fails when alloc_ucounts() can't
allocate and it only allocates when the real uid of the caller differs
from its effective uid.
Commit cefd55bd2159 ("nsproxy: fix free_nsproxy() and simplify
create_new_namespaces()") separated the two cases on purpose.
nsproxy_free() frees an nsproxy that was prepared but never installed
and that's what a failed setns() uses in put_nsset(). Export it and use
it for a failed unshare() as well. |
| Endatix is a self-hosted form and survey management platform with a headless API. Prior to 0.7.0, the anonymous `POST /forms/{formId}/submissions` endpoint stores attacker-controlled `JsonData` after checking only that the JSON is well formed. A file object with `name`, `type` and `content` fields can contain an HTTP or HTTPS URL. When a staff member with `submissions.view` permission invokes `POST /forms/{formId}/submissions/{submissionId}/files`, `GetFilesHandler` passes the stored data to `SubmissionFileExtractor` in `src/Endatix.Infrastructure/Features/Submissions/SubmissionFileExtractor.cs`, which calls `HttpClient.GetAsync` without validating the destination URL, host or resolved IP addresses against internal address ranges. This permits stored, second-order server-side GET requests to internal services, cloud metadata, loopback and link-local addresses from the server's network position. The form must have `IsPublic` and `IsEnabled` set, and an anonymous submission must pass reCAPTCHA v3 when configured. The fetched response is placed in the staff viewer's ZIP, not returned directly to the attacker, so disclosure to the attacker is blind or indirect through observable request behavior or information exposed by the viewer. No integrity or availability impact is asserted; data: and raw-base64 `content` are decoded locally without network requests. This issue is fixed in version 0.7.0. |
| Crawl4AI before 0.9.5 contains a blind server-side request forgery vulnerability in the Docker server that allows API clients to bypass the egress proxy by enabling check_cache_freshness. Attackers can cache a controlled URL, then trigger CacheValidator to follow 302 redirects or DNS rebinding to internal and cloud-metadata addresses for port and service discovery. |
| YesWiki before 4.7.0 contains an unauthenticated server-side request forgery vulnerability that allows remote attackers to fetch arbitrary URLs by supplying [[|URL]] wiki syntax to the render handler. Attackers can pass the syntax in the content parameter of the page render handler to reach internal hosts and ports and read their responses. |
| A vulnerability was determined in EyouCMS up to 1.8.3. This impacts the function remote_file_to_local of the file application/function.php. Executing a manipulation can lead to server-side request forgery. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in SH3. This affects an unknown function of the component Módulo de Gestão/Módulo de Arrecadação. The manipulation leads to password hash with insufficient computational effort. The attack is possible to be carried out remotely. A high degree of complexity is needed for the attack. The exploitability is reported as difficult. The exploit has been disclosed publicly and may be used. Upgrading to version 2026.0.2.0 mitigates this issue. Upgrading the affected component is recommended. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: fix devlink_rel reference leak when notify work is pending
devlink_rel_nested_in_notify_work_schedule() takes a reference on the
devlink_rel for the notify work and then queues the work, ignoring the
return value of schedule_delayed_work(). If the work is already pending,
nothing new is queued, the work runs only once and drops only one
reference, so the extra one is leaked together with the devlink_rel and
its index in devlink_rels.
This is easy to hit. devl_register() of a nested instance queues the
work, and if the instance is unregistered before the work has run,
devlink_rel_put() queues it again while it is still pending. The work
also keeps rescheduling itself for as long as the parent devlink lock
cannot be taken, which widens the window. Registering and unregistering
a nested devlink instance 100 times while holding the parent lock leaks
all 100 devlink_rel objects.
The reschedule path in devlink_rel_nested_in_notify_work() has the same
problem: if the work was queued again while it was running, the
reference it holds is never dropped.
Drop the reference in both places when the work was already pending.
The pending work holds its own reference, so this can not be the last
one. |
| Simple Machines Forum 2.1 prior to commit b4d23df (fixed in 2.1.8) and 3.0 prior to commit 4bf35cf contains a server-side request forgery vulnerability in the image proxy that allows authenticated attackers to trigger internal HTTP requests by embedding attacker-controlled URLs in BBCode image tags, which the proxy fetches without validating resolved destination IPs against private address ranges, loopback, or link-local addresses. Attackers can leverage SMF's automatic HMAC signature generation for any embedded image URL to obtain valid signed proxy requests targeting internal services such as cloud instance metadata endpoints, internal web applications, and container network services. |
