| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO
rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from
the probe path, which may sleep and is not timing-critical. When the
reset GPIO is provided by a sleeping controller such as an I2C I/O
expander, gpiod_set_value() warns:
WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61
Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT)
Workqueue: events_unbound deferred_probe_work_func
pc : gpiod_set_value+0x44/0x80
lr : rtl83xx_probe+0x1d8/0x3a0
Call trace:
gpiod_set_value+0x44/0x80 (P)
rtl83xx_probe+0x1d8/0x3a0
realtek_mdio_probe+0x24/0xa0
mdio_probe+0x38/0x78
really_probe+0xc4/0x3e0
__driver_probe_device+0x15c/0x1b8
driver_probe_device+0xb4/0x120
__device_attach_driver+0xb8/0x1a0
bus_for_each_drv+0x88/0xf0
__device_attach+0xa0/0x1d8
device_initial_probe+0x54/0x68
bus_probe_device+0x38/0xa0
deferred_probe_work_func+0xb8/0x120
process_one_work+0x184/0x4e8
worker_thread+0x188/0x308
kthread+0x130/0x150
ret_from_fork+0x10/0x20
Switch both helpers to gpiod_set_value_cansleep() so such a reset GPIO can
be used without triggering the warning.
The reset GPIO has been driven with the non-sleeping gpiod_set_value()
since the driver was added in v4.19. The call has since been refactored
across several files - from realtek-smi.c / realtek-mdio.c into the common
rtl83xx.c module and then into the rtl83xx_reset_assert() and
rtl83xx_reset_deassert() helpers (both in v6.9). This patch therefore
applies as-is only to kernels that carry those helpers (v6.9+); older
stable kernels need the same gpiod_set_value_cansleep() conversion at the
corresponding open-coded call sites. |
| An issue was discovered in OpenStack Nova before 30.2.2, 31 before 31.2.1, and 32 before 32.1.1. By writing a malicious QCOW header to a root or ephemeral disk and then triggering a resize, a user may convince Nova's Flat image backend to call qemu-img without a format restriction, resulting in an unsafe image resize operation that could destroy data on the host system. Only compute nodes using the Flat image backend (usually configured with use_cow_images=False) are affected. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix missing barrier when checking io-uring readiness
fuse_block_alloc() reads fch->initialized and then fch->io_uring.
fch->io_uring is set before fch->initialized, ordered by the smp_wmb()
in fuse_chan_set_intialized(), but fuse_block_alloc() has no matching
read barrier between the two loads.
This may lead a CPU to observe fch->initialized=1 but fch->io_uring=0,
and skip the check that blocks request allocation until the io-uring
queues are ready. This can reintroduce the lock-order inversion deadlock
that commit 3393ff964e0f prevents.
Add an smp_rmb() barrier to pair with the smp_wmb() in
fuse_chan_set_initialized() to prevent this. |
| Tor before 0.4.9.12 interprets the CC_RESPONSE extension even when CC_REQUEST was not sent, which allows remote attackers to cause a denial of service (crash) because of corrupted congestion-control state. This is TROVE-2026-032. |
| The Bluetooth Classic (BR/EDR) L2CAP receive handler bt_l2cap_br_recv() in subsys/bluetooth/host/classic/l2cap_br.c dispatched inbound data PDUs based only on the destination channel ID, without checking that the target channel had reached the BT_L2CAP_CONNECTED state. A dynamic channel is assigned its RX CID and added to the connection's channel list while still in BT_L2CAP_CONNECTING (and later BT_L2CAP_CONFIG) — before configuration completes and, for PSMs that require security, before the peer is authenticated (l2cap_br_conn_req()).
Because the channel is already findable by bt_l2cap_br_lookup_rx_cid() during this window, a remote peer within radio range can send a data PDU addressed to that CID and have it processed on a not-yet-established channel. The dispatch keys off channel fields (BR_CHAN(chan)->rx.mode, rx.mps) that are only initialized during configuration by l2cap_br_conf(); since channel objects are pooled and bt_l2cap_br_chan_del() does not reset rx.mode or the reassembly buffer _sdu, a reused channel can carry stale state into the CONNECTING window and route the frame into the retransmission/flow-control path (bt_l2cap_br_ret_fc_recv()) with stale parameters and a possibly stale _sdu pointer.
The impact is delivery of attacker data to upper-layer protocol handlers on a half-open (and possibly unauthenticated) channel, plus operation on stale or partially initialized channel state on reused channel objects — leading to channel/link teardown (denial of service) and, in the stale-_sdu case, a dangling-pointer condition. The fix adds an explicit BR_CHAN(chan)->state < BT_L2CAP_CONNECTED guard that drops any data received before the channel is fully connected. |
| PocketMine-MP versions before 5.39.2 fail to validate entity despawn state when processing attack packets from clients. Attackers can exploit a race condition by attacking a disconnecting player to trigger multiple death handlers, causing inventory items and experience to drop multiple times for duplication. |
| Improper initialization in Views in Google Chrome on on Windows prior to 153.0.8010.36 allowed a remote attacker who had compromised the renderer process and leveraged social engineering to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| x86 PV guests can free memory pages while still keeping a stale TLB entry
pointing to them. A TLB flush is only issued by Xen (if needed) when the
page is re-used. Since it's possible for the page to be scrubbed ahead of
the TLB flush, there's a window where a PV guest can modify an already
scrubbed page. |
| Improper resource exposure in CacheStorage in Google Chrome prior to 152.0.7977.82 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly. |
| In xinclude in libxml2 before 2.15.4, xmlXIncludeProcess and xmlXIncludeProcessTree do not propagate parseFlags. This has security relevance for, for example, the XML_PARSE_NONET flag, if (without it) a custom resource loader accesses the internet and triggers XML external entity injection, SSRF, or a denial of service (e.g., for an attacker-controlled internet resource that is intentionally slow). |
| In specific scenarios involving multiple clients with different DNS resolver configurations, Reactor Netty may incorrectly reuse a previously configured DNS resolver.
Reactor Netty 1.3.0 - 1.3.6
Reactor Netty 1.1.0 - 1.2.18
Reactor Netty 1.0.52 and earlier |
| In the Linux kernel, the following vulnerability has been resolved:
HID: rapoo: fix missing hid_is_usb() check
to_usb_interface() can only be used on a hid_device whose parent is really
USB; uhid can create devices that identify as being on BUS_USB, but don't
actually have a USB parent.
Fix the use of to_usb_interface() without a hid_is_usb() check.
Add a dependency on USB_HID for hid_is_usb(), as other HID drivers do; the
alternative would be to provide a simple stub implementation on !USB_HID
builds.
I have verified that it is currently possible to trigger a kernel splat due
to this bug in an ASAN build, and that this commit fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix missing metadata reservation for large xattrs
[BUG]
lsetxattr() panics the kernel when setting a large xattr value on a
fragmented filesystem where the file already has an external xattr
block.
[CAUSE]
ocfs2_calc_xattr_set_need() never reserves metadata blocks for a new
xattr value's extent tree when the file already has an external xattr
block. The not_found path leaves meta_add at zero, so meta_ac is NULL
when ocfs2_xattr_extend_allocation() runs.
A new value root has room for a single extent record. On a fragmented
filesystem, the allocator cannot satisfy the xattr value in one
contiguous run, so each non-contiguous run requires its own extent
record. When the value root's extent list is full and meta_ac is NULL,
ocfs2_add_clusters_in_btree() returns RESTART_META, and
ocfs2_xattr_extend_allocation() hits BUG_ON(why == RESTART_META).
[FIX]
The case where no xattr block exists yet already calls
ocfs2_extend_meta_needed(&def_xv.xv.xr_list) to reserve value tree
metadata. Add the same reservation to the case where an xattr block
already exists, making the two cases consistent.
Replace the BUG_ON with a -ENOSPC return so that if RESTART_META is
returned despite the reservation, the error propagates to userspace
instead of panicking the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: avoid lock inversion in nat keepalive work
nat_keepalive_work() walks the state table while xfrm_state_walk()
holds net->xfrm.xfrm_state_lock. Its callback then acquires x->lock,
which conflicts with the delete path taking the same locks in reverse
order via xfrm_state_delete() and __xfrm_state_delete(). This creates
an AB-BA deadlock that is reported by lockdep when a NAT keepalive
worker races with SA deletion.
Fix this by splitting the keepalive walk into two phases. First,
collect the candidate states while the walk holds xfrm_state_lock and
take a reference on each state. Then, after the walk completes, process
each collected state and acquire x->lock without nesting it under
xfrm_state_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix buffer head management in ocfs2_read_blocks()
In ocfs2_read_blocks(), caller should't assume that buffer head returned
by 'sb_getblk()' is exclusively owned and so 'put_bh()' always drops
b_count from 1 to 0. If it is not so, buffer head remains on hold and
likely to be returned by the next call to 'sb_getblk()' unchanged - that
is, with BH_Uptodate bit set even if it has failed validation previously,
thus allowing to insert that buffer head into OCFS2 metadata cache and
submit it to upper layers. To avoid such a scenario, BH_Uptodate should
be cleared immediately after 'validate()' callback has detected some data
inconsistency. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: Allocate iomap inline_data using alloc_page
This fixes a BUG reported in iomap_write_end_inline:
iomap_inline_data_valid checks that the inline_data fits within
a page. If the inline_data is allocated with kmemdup there's no
guarantee that it's page-aligned, so the check sometimes fails.
Allocate it with alloc_page to ensure it's page-aligned. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv: Order pt_vp_array publish against irqfd assertion path
mshv_partition_ioctl_create_vp() initialises a VP struct (allocations,
mutex_init, init_waitqueue_head, page mappings) and then publishes the
pointer into partition->pt_vp_array. Several ISR paths read this array
locklessly: the intercept ISR, the two scheduler ISRs, and
mshv_try_assert_irq_fast() on the irqfd fast path.
Of these, only mshv_try_assert_irq_fast() can structurally race the
publish. It runs from an eventfd waker without holding pt_mutex, and
MSHV_IRQFD does not require the target lapic_apic_id (== vp_index) to
refer to an existing VP at registration time. A user can therefore
register an irqfd targeting a yet-to-be-created VP, then trigger
mshv_try_assert_irq_fast() concurrently with MSHV_CREATE_VP for the
same index. On weakly-ordered architectures the reader can observe a
non-NULL pointer in pt_vp_array before the initialising stores to the
VP struct become visible, leading to use of partially-initialised
fields (e.g. vp_register_page).
The other ISR readers cannot reach this race: the hypervisor will not
generate intercept or scheduler messages for a VP that has never been
told to run, and the user can only call MSHV_RUN_VP on the VP fd
returned by MSHV_CREATE_VP, which by construction is returned after
the publish. Leave those readers as plain loads.
Use smp_store_release() in mshv_partition_ioctl_create_vp() to publish
the pointer, and pair it with smp_load_acquire() in
mshv_try_assert_irq_fast(). On x86 these compile to plain accesses
under TSO; on ARM64 they emit one-instruction acquire/release barriers,
acceptable on this fast path.
The destroy-side path (destroy_partition() clearing pt_vp_array[i] to
NULL after kfree(vp)) has a separate ordering and lifetime concern
that is out of scope here. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: remove fscache backend entirely
EROFS over fscache was introduced to provide image lazy pulling
functionality. After the feature landed, the fscache subsystem made
netfs a new hard dependency, which is unexpected for a local filesystem
and has an kernel-defined caching hierarchy which could be inflexible
compared to the fanotify pre-content hooks. Therefore, this feature has
been deprecated for almost two years.
As EROFS file-backed mounts and fanotify pre-content hooks both upstream
for a while and already providing equivalent functionality (erofs-utils
has supported fanotify pre-content hooks), let's remove the fscache
backend now.
The main application of this feature is Nydus [1], and they plan to move
to use fanotify pre-content hooks in the near future too.
I hope this patch can be merged into Linux 7.2, which is also motivated
by newly found implementation issues [2][3] that are not worth
investigating given the deprecation and limited development resources.
The associated fscache/cachefiles cleanup patch will follow separately
through the vfs tree (netfs) later: it seems fine since the codebase is
isolated by CONFIG_CACHEFILES_ONDEMAND.
[1] https://github.com/dragonflyoss/nydus/blob/v2.1.0/docs/nydus-fscache.md
[2] https://github.com/dragonflyoss/nydus/pull/1824
[3] https://lore.kernel.org/r/20260619135800.1594811-1-michael.bommarito@gmail.com |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: espintcp: fix UAF during close
ZDI reported and analyzed a race condition during close for espintcp
sockets:
espintcp_close() frees emsg->skb via kfree_skb() without holding
any socket lock. Concurrently, the xfrm_trans_reinject work queue
invokes esp_output_tcp_finish() -> espintcp_push_skb() ->
espintcp_push_msgs() -> skb_send_sock_locked(), which reads the
same skb as a data source.
Fix this by adding a synchronize_rcu() call after resetting sk_prot,
since esp_output_tcp_finish() runs under RCU and won't use a socket
with sk_prot == &tcp_prot. Simply taking the socket lock in
espintcp_close() could lead to leaks, if esp_output_tcp_finish()
re-adds an skb in the slot we just freed. After this, the existing
barrier() is no longer needed. |
