| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| undici is an HTTP client library for Node.js. In versions 7.15.0 through 7.30.0 and 8.0.0 through 8.12.1, its fetch() implementation verifies Subresource Integrity metadata by matching the algorithm token against a lowercase-only set, even though the SRI specification defines the token by its ASCII-lowercase form, so a valid but non-lowercase token such as an uppercase or mixed-case SHA256 is treated as unknown and skipped. When no recognized algorithm remains, undici treats the integrity list as empty and accepts the response, so a server returning a body that does not match the pinned digest passes the check. An attacker who controls only the response body can therefore deliver attacker-controlled bytes to an application that pinned a valid uppercase or mixed-case SRI token, with no integrity error, affecting response integrity only. The issue is fixed in undici 7.30.1 and 8.12.2, which normalize the algorithm token to ASCII lowercase before validation, and users should upgrade to one of those versions or later. As a workaround, use lowercase algorithm tokens such as sha256, sha384, or sha512 in integrity metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: don't use simple_strtoul
Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(),
and ct_sip_parse_request() with a new sip_parse_port() helper that
validates each digit against the buffer limit, eliminating the use of
simple_strtoul() which assumes NUL-terminated strings.
The previous code dereferenced pointers without bounds checks after
sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated
skb data. A port that reaches the buffer limit without a trailing
character is also rejected as malformed.
Also get rid of all simple_strtoul() usage in conntrack, prefer a
stricter version instead. There are intentional changes:
- Bail out if number is > UINT_MAX and indicate a failure, same for
too long sequences.
While we do accept 05535 as port 5535, we will not accept e.g.
'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261,
we should restrict this to not waste cycles when presented with
malformed packets with 64k '0' characters.
- Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch
'expire=' and 'rports='; both are expected to use base-10.
- In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k
range.
- epaddr_len now returns 0 if the port is invalid, as it already does
for invalid ip addresses. This is intentional. nf_conntrack_sip
performs lots of guesswork to find the right parts of the message
to parse. Being stricter could break existing setups.
Connection tracking helpers are designed to allow traffic to
pass, not to block it.
Based on an earlier patch from Jenny Guanni Qu <qguanni@gmail.com>. |
| In the Linux kernel, the following vulnerability has been resolved:
Buffer overflow in drivers/xen/sys-hypervisor.c
The build id returned by HYPERVISOR_xen_version(XENVER_build_id) is
neither NUL terminated nor a string.
The first causes a buffer overflow as sprintf in buildid_show will
read and copy till it finds a NUL.
00000000 f4 91 51 f4 dd 38 9e 9d 65 47 52 eb 10 71 db 50 |..Q..8..eGR..q.P|
00000010 b9 a8 01 42 6f 2e 32 |...Bo.2|
00000017
So use a memcpy instead of sprintf to have the correct value:
00000000 f4 91 51 f4 dd 00 9e 9d 65 47 52 eb 10 71 db 50 |..Q.....eGR..q.P|
00000010 b9 a8 01 42 |...B|
00000014
(the above have a hack to embed a zero inside and check it's
returned correctly).
This is XSA-485 / CVE-2026-31786 |
| Improper handling of unicode encoding vulnerability in Progress MOVEit Transfer.
This issue affects MOVEit Transfer: before 2025.1.6 and from 2026.0.0 before 2026.0.4. |
| svg-sanitizer is a PHP SVG/XML sanitizer. Prior to 1.0.0, Resolver::processReferences() in src/ElementReference/Resolver.php builds the SVG <use> reference graph with a case-sensitive href attribute predicate before cleanHrefAttributes() normalizes mixed-case names. An attacker can provide xlink:HrEf on nested <use> elements so the graph omits those references, after which the sanitizer converts the attribute to canonical xlink:href and returns the live nesting structure without applying the useNestingLimit protection. A consuming application that renders the sanitized SVG can therefore be exposed to the resource exhaustion that control is designed to prevent. This issue is fixed in version 1.0.0. |
| Use of uninitialized resource in Windows Modern Device Management (MDM) allows an authorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: ensure names are nul-terminated
Reject names that lack a \0 character before feeding them
to functions that expect c-strings.
Fixes tag is the most recent commit that needs this change. |
| Backstage is an open framework for building developer portals. Prior to 3.9.1, the @backstage/plugin-catalog-backend package is affected by inconsistent catalog property permission evaluation. In deployments that use affected value-based catalog permission conditions as a confidentiality boundary, an authenticated user could receive catalog entity data that policy authors intended to restrict. This issue is fixed in version 3.9.1. |
| fastify is a fast and low overhead web framework for Node.js. In versions 5.12.2 through 5.12.5, the routine that lowercases header names declared in a route schema does not lowercase the enum or const header names nested inside a propertyNames subschema. As a result, a header allow-list or deny-list written with canonical (non-lowercase) casing never matches the incoming lowercased header, so a restricted header passes validation and reaches the route handler. An attacker can therefore bypass a case-sensitive header validation rule and smuggle a forbidden header past the schema, affecting the integrity of request handling. The issue is fixed in fastify 5.12.6, and users should upgrade to 5.12.6 or later. There is no workaround other than upgrading, though applications can declare header names in lowercase to avoid the mismatch. |
| OpenNext Cloudflare is an open Next.js adapter for Cloudflare. From 0.3.0 until 1.20.2, applications that enable enableCacheInterception, rely on middleware for access control, and have a matching cached protected route process encoded pathnames inconsistently between middleware matching and cache lookup. An unauthenticated attacker can use a percent-encoded pathname that does not match authorization middleware but decodes to the cache key of a protected route, causing cached content to be returned without authorization. Malformed encodings can also be partially decoded, allowing cache lookup to continue with a pathname that middleware did not evaluate consistently. This issue is fixed in version 1.20.2. |
| In Eclipse Jetty, across various versions of `jetty-server`, and `jetty-proxy`, the host whitelist/blacklist is case-sensitive, and would allow hosts through that only differ by case. |
| When Gitea's built-in SSH server is enabled (`START_SSH_SERVER = true`), the presented public key was looked up with an SQL `LIKE` comparison of its encoded content, which is case-insensitive on some databases, including the default SQLite. An attacker who can construct a case variant of another user's registered RSA public key for which they can derive the private key could have that key matched to the victim's account and authenticate over SSH as that user. Keys are now looked up by fingerprint. |
| SQLite 'sqldiff.exe' does not securely handle the way the Microsoft Windows C runtime converts Unicode characters to ANSI codepages. An attacker could use the '-L' option to load an arbitrary DLL with a crafted command line argument string that results in command line file arguments being misinterpreted as command line options. Fixed on or around 2025-12-26. |
| The curl URL parser wrongly accepts percent-encoded URL separators like '/'when decoding the host name part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more. |
| xmlparse.c in Expat (aka libexpat) before 2.4.5 allows attackers to insert namespace-separator characters into namespace URIs. |
| An arbitrary file write vulnerability was found in GNU gzip's zgrep utility. When zgrep is applied on the attacker's chosen file name (for example, a crafted file name), this can overwrite an attacker's content to an arbitrary attacker-selected file. This flaw occurs due to insufficient validation when processing filenames with two or more newlines where selected content and the target file names are embedded in crafted multi-line file names. This flaw allows a remote, low privileged attacker to force zgrep to write arbitrary files on the system. |
| Python 2.7.x through 2.7.16 and 3.x through 3.7.2 is affected by: Improper Handling of Unicode Encoding (with an incorrect netloc) during NFKC normalization. The impact is: Information disclosure (credentials, cookies, etc. that are cached against a given hostname). The components are: urllib.parse.urlsplit, urllib.parse.urlparse. The attack vector is: A specially crafted URL could be incorrectly parsed to locate cookies or authentication data and send that information to a different host than when parsed correctly. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.7, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.3, v3.7.3rc1, v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9. |
| A security regression of CVE-2019-9636 was discovered in python since commit d537ab0ff9767ef024f26246899728f0116b1ec3 affecting versions 2.7, 3.5, 3.6, 3.7 and from v3.8.0a4 through v3.8.0b1, which still allows an attacker to exploit CVE-2019-9636 by abusing the user and password parts of a URL. When an application parses user-supplied URLs to store cookies, authentication credentials, or other kind of information, it is possible for an attacker to provide specially crafted URLs to make the application locate host-related information (e.g. cookies, authentication data) and send them to a different host than where it should, unlike if the URLs had been correctly parsed. The result of an attack may vary based on the application. |
| Dell Command | Configure (DCC), versions prior to 5.2.3.35, contain an Improper Handling of Mixed Encoding vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Elevation of Privileges. |
| Open Computer Use through 1.0.0 on macOS contains an improper case sensitivity handling vulnerability that allows local MCP callers to bypass the password-manager denylist using case-variant bundle identifiers. Attackers, including prompt-injected model turns, can pass identifiers like com.1Password.1Password to get_app_state and action tools to read accessibility trees, capture screenshots, and drive unlocked password manager interfaces. |
