| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
padata: Put CPU offline callback in ONLINE section to allow failure
syzbot reported the following warning:
DEAD callback error for CPU1
WARNING: kernel/cpu.c:1463 at _cpu_down+0x759/0x1020 kernel/cpu.c:1463, CPU#0: syz.0.1960/14614
at commit 4ae12d8bd9a8 ("Merge tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux")
which tglx traced to padata_cpu_dead() given it's the only
sub-CPUHP_TEARDOWN_CPU callback that returns an error.
Failure isn't allowed in hotplug states before CPUHP_TEARDOWN_CPU
so move the CPU offline callback to the ONLINE section where failure is
possible. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: add sanity check for channel array
Fail gracefully if there is no channel array attached to the mailbox
controller. Otherwise the later dereference will cause an OOPS which
might not be seen because mailbox controllers might instantiate very
early. Remove the comment explaining the obvious while here. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix incorrect inheritable capability in CAPSET records
__audit_log_capset() records the effective capability set into the
inheritable field due to a copy-paste error. Every CAPSET audit
record therefore reports cap_pi (process inheritable) with the value
of cap_effective instead of cap_inheritable.
This silently corrupts audit data used for compliance and forensic
analysis: an attacker who modifies inheritable capabilities to
prepare for a privilege-escalating exec would have the change masked
in the audit trail.
The bug has been present since the original introduction of CAPSET
audit records in 2008. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gma500/oaktrail_lvds: fix hang on init failure
The LVDS init code looks up an I2C adapter using i2c_get_adapter() and
tries to read the EDID before falling back to allocating and registering
its own adapter.
The error handling does not separate these cases so on a late init
failure it will try to deregister and free also an adapter that had
previously been registered. Since i2c_get_adapter() takes another
reference to the adapter, deregistration hangs indefinitely while
waiting for the reference to be released.
Fix this by only destroying adapters allocated during LVDS init on
errors. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix sleep-inside-lock in __smc_setsockopt() causing local DoS
A logic flaw in __smc_setsockopt() allows a local unprivileged user to
cause a Denial of Service (DoS) by holding the socket lock indefinitely.
The function __smc_setsockopt() calls copy_from_sockptr() while holding
lock_sock(sk). By passing a userfaultfd-monitored memory page (or
FUSE-backed memory on systems where unprivileged userfaultfd is disabled)
as the optval, an attacker can halt execution during the copy operation,
keeping the lock held.
Combined with asynchronous tear-down operations like shutdown(), this
exhausts the kernel wq (kworkers) and triggers the hung task watchdog.
[ 240.123456] INFO: task kworker/u8:2 blocked for more than 120 seconds.
[ 240.123489] Call Trace:
[ 240.123501] smc_shutdown+...
[ 240.123512] lock_sock_nested+...
This patch moves the user-space copy outside the lock_sock() critical
section to prevent the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: synproxy: add mutex to guard hook reference counting
As the synproxy infrastructure register netfilter hooks on-demand when a
user adds the first iptables target or nftables expression, if done
concurrently they can race each other.
Introduce a mutex to serialize the refcount control blocks access from
both frontends. While a per namespace mutex might be more efficient, it
is not needed for target/expression like SYNPROXY. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: enforce HE/EHT cap/oper consistency
Xiang Mei reports that mac80211 could crash if eht_cap is set
but eht_oper isn't. Rather than fixing that for the individual
user(s), enforce that both HE/EHT have consistent elements. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
This patch restricts setting Loose Source and Record Route (LSRR)
and Strict Source and Record Route (SSRR) IP options to users
with CAP_NET_RAW capability.
This prevents unprivileged applications from forcing packets to route
through attacker-controlled nodes to leak TCP ISN and possibly other
protocol information.
While LSRR and SSRR are commonly filtered in many network environments,
they may still be supported and forwarded along some network paths.
RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing
IPv4 Options) recommend to drop these options in 4.3 and 4.4. |
| In the Linux kernel, the following vulnerability has been resolved:
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
In mrp_pdu_parse_vecattr(), vector attribute events are encoded three
per byte and valen tracks the number of events left to process.
The parser decrements valen after processing the first and second events
from each event byte, but not after processing the third one. When valen
is exactly a multiple of three, the loop continues after the last valid
event and consumes the next byte as a new event byte, applying a
spurious event to the MRP applicant state.
Additionally, when valen is zero the parser unconditionally consumes
attrlen bytes as FirstValue and advances the offset, even though per
IEEE 802.1ak a VectorAttribute with only a LeaveAllEvent has valen of
zero and no FirstValue or Vector fields. This corrupts the offset for
subsequent PDU parsing.
Also, when valen exceeds three the loop crosses byte boundaries but
the attribute value is not incremented between the last event of one
byte and the first event of the next. This causes the first event of
the next byte to use the same attribute value as the third event
rather than the next consecutive value.
Decrement valen after processing the third event, skip FirstValue
consumption when valen is zero, and increment the attribute value at
the end of each loop iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: dummy: fix UMP event stack overread
The dummy sequencer port forwards events by copying an incoming
struct snd_seq_event into a stack temporary, rewriting source and
destination, and dispatching the temporary to subscribers. That legacy
event storage is smaller than struct snd_seq_ump_event.
When a UMP event reaches the dummy client, the copy leaves the UMP flag
set but only provides legacy-sized stack storage. The subscriber
delivery path then uses snd_seq_event_packet_size() and copies a
UMP-sized packet from that stack object, reading past the end of the
temporary.
Use the existing union __snd_seq_event storage and copy the packet size
reported for the incoming event before rewriting the common routing
fields. This preserves the full UMP packet for UMP events while keeping
legacy event handling unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
netlabel: validate unlabeled address and mask attribute lengths
netlbl_unlabel_addrinfo_get() used the address attribute length to
determine whether the attribute data could be read as an IPv4 or IPv6
address, but did not independently validate the corresponding mask
attribute length. A crafted Generic Netlink request could therefore
provide a valid IPv4/IPv6 address attribute with a shorter mask
attribute, which would later be read as a full struct in_addr or
struct in6_addr.
NLA_BINARY policy lengths are maximum lengths by default, so use
NLA_POLICY_EXACT_LEN() for the unlabeled IPv4/IPv6 address and mask
attributes. This rejects short attributes during policy validation and
also exposes the exact length requirements through policy introspection. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: restrict SO_ATTACH_FILTER to priv users
This patch restricts the use of SO_ATTACH_FILTER (cBPF) on TCP sockets
to users with CAP_NET_ADMIN capability.
This blocks potential side-channel attack where an unprivileged application
attaches a filter to leak TCP sequence/acknowledgment numbers. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: avoid leaking percpu counter pointers
The native and compat get-entries paths copy the fixed rule entry header
from the kernelized rule blob to userspace before overwriting the entry's
counter fields with a sanitized counter snapshot.
On SMP kernels, entry->counters.pcnt contains the percpu allocation
address used by x_tables rule counters. A caller can provide a userspace
buffer that faults during the initial fixed-header copy after pcnt has
been copied but before the later sanitized counter copy runs. The syscall
then returns -EFAULT while leaving the raw percpu pointer in userspace.
Copy only the fixed entry prefix before counters from the kernelized rule
blob, then copy the sanitized counter snapshot into the counter field.
Apply this ordering to the IPv4, IPv6, and ARP native and compat
get-entries implementations so a fault cannot expose the internal percpu
counter pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
net/bluetooth/l2cap_core.c:l2cap_sig_channel() accepts BR/EDR
signaling packets up to the channel MTU and dispatches each command
without enforcing the signaling MTU (MTUsig). A Bluetooth BR/EDR peer
within radio range can send a fixed-channel CID 0x0001 packet that is
larger than MTUsig and contains many L2CAP_ECHO_REQ commands before
pairing. In a real-radio stock-kernel run, one 681-byte signaling
packet containing 168 zero-length ECHO_REQ commands made the target
transmit 168 ECHO_RSP frames over about 220 ms.
Impact: a Bluetooth BR/EDR peer within radio range, before pairing, can
force 168 ECHO_RSP frames from one 681-byte fixed-channel signaling
packet containing packed ECHO_REQ commands.
Define Linux's BR/EDR signaling MTU as the spec minimum of 48 bytes and
reject any larger signaling packet with one L2CAP_COMMAND_REJECT_RSP
carrying L2CAP_REJ_MTU_EXCEEDED before any command is dispatched.
The Bluetooth Core spec wording for MTUExceeded says the reject
identifier shall match the first request command in the packet, and
that packets containing only responses shall be silently discarded.
Linux intentionally deviates from that prescription: silently
discarding desynchronizes the peer because the remote stack never
learns its responses were dropped, and locating the first request
command requires walking command headers past MTUsig, i.e. processing
bytes from a packet we have already decided is too large to process.
We therefore always emit one reject and use the identifier from the
first command header, a single fixed-offset byte read.
The unrestricted BR/EDR signaling parser and ECHO_REQ response path both
trace to the initial git import; no later introducing commit is
available for a Fixes tag. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add bounds check for firmware runtime memory
Validate that the firmware runtime memory specified in the image
header is properly aligned and sized to hold the firmware image.
This prevents errors during memory allocation and image transfer. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: reject fuse_notify() pagecache ops on directories
The operations FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE allow the
FUSE daemon to actively write/read pagecache contents.
For directories with FOPEN_CACHE_DIR, the pagecache is used as
kernel-internal cache storage, and userspace is not supposed to have
direct access to this cache - in particular, fuse_parse_cache() will hit
WARN_ON() if the cache contains bogus data.
Reject FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE on anything other than
regular files with -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma: Do not try to iommu_map a 0 length region in swiotlb
iommu_dma_iova_link_swiotlb() processes a mapping that is unaligned in three
parts, the head, middle and trailer. If the middle is empty because there
are no aligned pages it will call down to iommu_map() with a 0 size
which the iommupt implementation will fail as illegal.
It then tries to do an error unwind and starts from the wrong spot
corrupting the mapping so the eventual destruction triggers a WARN_ON.
Check for 0 length and avoid mapping and use offset not 0 as the starting
point to unlink.
This is frequently triggered by using some kinds of thunderbolt NVMe
drives that trigger forced SWIOTLB for unaligned memory. NVMe seems to
pass in oddly aligned buffers for the passthrough commands from smartctl
that hit this condition. |
| In the Linux kernel, the following vulnerability has been resolved:
md: wake raid456 reshape waiters before suspend
During raid456 reshape, direct IO across the reshape position can sleep
in raid5_make_request() waiting for reshape progress while still
holding an active_io reference. If userspace then freezes reshape and
writes md/suspend_lo or md/suspend_hi, mddev_suspend() kills active_io
and waits for all in-flight IO to drain.
This can deadlock: the IO needs reshape progress to continue, but the
reshape thread is already frozen, so the active_io reference is never
dropped and suspend never completes.
raid5_prepare_suspend() already wakes wait_for_reshape for dm-raid. Do
the same for normal md suspend when reshape is already interrupted, so
waiting raid456 IO can abort, drop its reference, and let suspend
finish.
The mdadm test tests/25raid456-reshape-deadlock reproduces the hang. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/amd/ibs: Avoid calling perf_allow_kernel() from the IBS NMI handler
Calling perf_allow_kernel() from the NMI context is unsafe and could be
fatal. Capture the permission at event-initialization time by storing it
in event->hw.flags, and have the NMI handler rely on that cached flag
instead of making the call directly. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: return VMA snapshot from task_vma iterator
Holding the per-VMA lock across the BPF program body creates a lock
ordering problem when helpers acquire locks that depend on mmap_lock:
vm_lock -> i_rwsem -> mmap_lock -> vm_lock
Snapshot the VMA under the per-VMA lock in _next() via memcpy(), then
drop the lock before returning. The BPF program accesses only the
snapshot.
The verifier only trusts vm_mm and vm_file pointers (see
BTF_TYPE_SAFE_TRUSTED_OR_NULL in verifier.c). vm_file is reference-
counted with get_file() under the lock and released via fput() on the
next iteration or in _destroy(). vm_mm is already correct because
lock_vma_under_rcu() verifies vma->vm_mm == mm. All other pointers
are left as-is by memcpy() since the verifier treats them as untrusted. |
