| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in QEMU in the uefi-vars virtual device. When the guest writes to register UEFI_VARS_REG_BUFFER_SIZE, the .write callback `uefi_vars_write` is invoked. The function allocates a heap buffer without zeroing the memory, leaving the buffer filled with residual data from prior allocations. When the guest later reads from register UEFI_VARS_REG_PIO_BUFFER_TRANSFER, the .read callback `uefi_vars_read` returns leftover metadata or other sensitive process memory from the previously allocated buffer, leading to an information disclosure vulnerability. |
| A flaw was found in linux-pam. The pam_namespace module may improperly handle user-controlled paths, allowing local users to exploit symlink attacks and race conditions to elevate their privileges to root. This CVE provides a "complete" fix for CVE-2025-6020. |
| A flaw was found in the virtio-crypto device of QEMU. A malicious guest operating system can exploit a missing length limit in the AKCIPHER path, leading to uncontrolled memory allocation. This can result in a denial of service (DoS) on the host system by causing the QEMU process to terminate unexpectedly. |
| A flaw was found in ose-openshift-apiserver. This vulnerability allows internal network enumeration, service discovery, limited information disclosure, and potential denial-of-service (DoS) through Server-Side Request Forgery (SSRF) due to missing IP address and network-range validation when processing user-supplied image references. |
| DISPUTE NOTE: this issue does not pose a security risk as it (according to analysis by the original software developer, NLnet Labs) falls within the expected functionality and security controls of the application. Red Hat has made a claim that there is a security risk within Red Hat products. NLnet Labs has no further information about the claim, and suggests that affected Red Hat customers refer to available Red Hat documentation or support channels. ORIGINAL DESCRIPTION: A NULL pointer dereference flaw was found in the ub_ctx_set_fwd function in Unbound. This issue could allow an attacker who can invoke specific sequences of API calls to cause a segmentation fault. When certain API functions such as ub_ctx_set_fwd and ub_ctx_resolvconf are called in a particular order, the program attempts to read from a NULL pointer, leading to a crash. This issue can result in a denial of service by causing the application to terminate unexpectedly. |
| Improper finite state machines (FSMs) in hardware logic in some Intel(R) Processors may allow an privileged user to potentially enable a denial of service via local access. |
| The net/http HTTP/1.1 client mishandled the case where a server responds to a request with an "Expect: 100-continue" header with a non-informational (200 or higher) status. This mishandling could leave a client connection in an invalid state, where the next request sent on the connection will fail. An attacker sending a request to a net/http/httputil.ReverseProxy proxy can exploit this mishandling to cause a denial of service by sending "Expect: 100-continue" requests which elicit a non-informational response from the backend. Each such request leaves the proxy with an invalid connection, and causes one subsequent request using that connection to fail. |
| The ip package through 2.0.1 for Node.js might allow SSRF because some IP addresses (such as 127.1, 01200034567, 012.1.2.3, 000:0:0000::01, and ::fFFf:127.0.0.1) are improperly categorized as globally routable via isPublic. NOTE: this issue exists because of an incomplete fix for CVE-2023-42282. |
| The ParseAddressList function incorrectly handles comments (text within parentheses) within display names. Since this is a misalignment with conforming address parsers, it can result in different trust decisions being made by programs using different parsers. |
| If errors returned from MarshalJSON methods contain user controlled data, they may be used to break the contextual auto-escaping behavior of the html/template package, allowing for subsequent actions to inject unexpected content into templates. |
| Verifying a certificate chain which contains a certificate with an unknown public key algorithm will cause Certificate.Verify to panic. This affects all crypto/tls clients, and servers that set Config.ClientAuth to VerifyClientCertIfGiven or RequireAndVerifyClientCert. The default behavior is for TLS servers to not verify client certificates. |
| The Libreswan Project was notified of an issue causing libreswan to restart under some IKEv2 retransmit scenarios when a connection is configured to use PreSharedKeys (authby=secret) and the connection cannot find a matching configured secret. When such a connection is automatically added on startup using the auto= keyword, it can cause repeated crashes leading to a Denial of Service. |
| A malformed DNS message in response to a query can cause the Lookup functions to get stuck in an infinite loop. |
| Undici is an HTTP/1.1 client. Starting in version 4.5.0 and prior to versions 5.28.5, 6.21.1, and 7.2.3, undici uses `Math.random()` to choose the boundary for a multipart/form-data request. It is known that the output of `Math.random()` can be predicted if several of its generated values are known. If there is a mechanism in an app that sends multipart requests to an attacker-controlled website, they can use this to leak the necessary values. Therefore, an attacker can tamper with the requests going to the backend APIs if certain conditions are met. This is fixed in versions 5.28.5, 6.21.1, and 7.2.3. As a workaround, do not issue multipart requests to attacker controlled servers. |
| Expr is an expression language and expression evaluation for Go. Prior to version 1.17.0, if the Expr expression parser is given an unbounded input string, it will attempt to compile the entire string and generate an Abstract Syntax Tree (AST) node for each part of the expression. In scenarios where input size isn’t limited, a malicious or inadvertent extremely large expression can consume excessive memory as the parser builds a huge AST. This can ultimately lead to*excessive memory usage and an Out-Of-Memory (OOM) crash of the process. This issue is relatively uncommon and will only manifest when there are no restrictions on the input size, i.e. the expression length is allowed to grow arbitrarily large. In typical use cases where inputs are bounded or validated, this problem would not occur. The problem has been patched in the latest versions of the Expr library. The fix introduces compile-time limits on the number of AST nodes and memory usage during parsing, preventing any single expression from exhausting resources. Users should upgrade to Expr version 1.17.0 or later, as this release includes the new node budget and memory limit safeguards. Upgrading to v1.17.0 ensures that extremely deep or large expressions are detected and safely aborted during compilation, avoiding the OOM condition. For users who cannot immediately upgrade, the recommended workaround is to impose an input size restriction before parsing. In practice, this means validating or limiting the length of expression strings that your application will accept. For example, set a maximum allowable number of characters (or nodes) for any expression and reject or truncate inputs that exceed this limit. By ensuring no unbounded-length expression is ever fed into the parser, one can prevent the parser from constructing a pathologically large AST and avoid potential memory exhaustion. In short, pre-validate and cap input size as a safeguard in the absence of the patch. |
| quic-go is an implementation of the QUIC protocol in Go. Prior to version 0.42.0, an attacker can cause its peer to run out of memory sending a large number of `NEW_CONNECTION_ID` frames that retire old connection IDs. The receiver is supposed to respond to each retirement frame with a `RETIRE_CONNECTION_ID` frame. The attacker can prevent the receiver from sending out (the vast majority of) these `RETIRE_CONNECTION_ID` frames by collapsing the peers congestion window (by selectively acknowledging received packets) and by manipulating the peer's RTT estimate. Version 0.42.0 contains a patch for the issue. No known workarounds are available. |
| All versions of the package node-gettext are vulnerable to Prototype Pollution via the addTranslations() function in gettext.js due to improper user input sanitization. |
| Applications and libraries which misuse connection.serverAuthenticate (via callback field ServerConfig.PublicKeyCallback) may be susceptible to an authorization bypass. The documentation for ServerConfig.PublicKeyCallback says that "A call to this function does not guarantee that the key offered is in fact used to authenticate." Specifically, the SSH protocol allows clients to inquire about whether a public key is acceptable before proving control of the corresponding private key. PublicKeyCallback may be called with multiple keys, and the order in which the keys were provided cannot be used to infer which key the client successfully authenticated with, if any. Some applications, which store the key(s) passed to PublicKeyCallback (or derived information) and make security relevant determinations based on it once the connection is established, may make incorrect assumptions. For example, an attacker may send public keys A and B, and then authenticate with A. PublicKeyCallback would be called only twice, first with A and then with B. A vulnerable application may then make authorization decisions based on key B for which the attacker does not actually control the private key. Since this API is widely misused, as a partial mitigation golang.org/x/cry...@v0.31.0 enforces the property that, when successfully authenticating via public key, the last key passed to ServerConfig.PublicKeyCallback will be the key used to authenticate the connection. PublicKeyCallback will now be called multiple times with the same key, if necessary. Note that the client may still not control the last key passed to PublicKeyCallback if the connection is then authenticated with a different method, such as PasswordCallback, KeyboardInteractiveCallback, or NoClientAuth. Users should be using the Extensions field of the Permissions return value from the various authentication callbacks to record data associated with the authentication attempt instead of referencing external state. Once the connection is established the state corresponding to the successful authentication attempt can be retrieved via the ServerConn.Permissions field. Note that some third-party libraries misuse the Permissions type by sharing it across authentication attempts; users of third-party libraries should refer to the relevant projects for guidance. |
| An information disclosure flaw was found in OpenShift's internal image registry operator. The AZURE_CLIENT_SECRET can be exposed through an environment variable defined in the pod definition, but is limited to Azure environments. An attacker controlling an account that has high enough permissions to obtain pod information from the openshift-image-registry namespace could use this obtained client secret to perform actions as the registry operator's Azure service account. |
| All versions of the package jsonpath-plus are vulnerable to Remote Code Execution (RCE) due to improper input sanitization. An attacker can execute aribitrary code on the system by exploiting the unsafe default usage of vm in Node.
**Note:**
There were several attempts to fix it in versions [10.0.0-10.1.0](https://github.com/JSONPath-Plus/JSONPath/compare/v9.0.0...v10.1.0) but it could still be exploited using [different payloads](https://github.com/JSONPath-Plus/JSONPath/issues/226). |
