| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Replace mutex with rwlock to avoid sleep in atomic context
The current use of a mutex to protect the notifier hashtable accesses
can lead to issues in the atomic context. It results in the below
kernel warnings:
| BUG: sleeping function called from invalid context at kernel/locking/mutex.c:258
| in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 9, name: kworker/0:0
| preempt_count: 1, expected: 0
| RCU nest depth: 0, expected: 0
| CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.14.0 #4
| Workqueue: ffa_pcpu_irq_notification notif_pcpu_irq_work_fn
| Call trace:
| show_stack+0x18/0x24 (C)
| dump_stack_lvl+0x78/0x90
| dump_stack+0x18/0x24
| __might_resched+0x114/0x170
| __might_sleep+0x48/0x98
| mutex_lock+0x24/0x80
| handle_notif_callbacks+0x54/0xe0
| notif_get_and_handle+0x40/0x88
| generic_exec_single+0x80/0xc0
| smp_call_function_single+0xfc/0x1a0
| notif_pcpu_irq_work_fn+0x2c/0x38
| process_one_work+0x14c/0x2b4
| worker_thread+0x2e4/0x3e0
| kthread+0x13c/0x210
| ret_from_fork+0x10/0x20
To address this, replace the mutex with an rwlock to protect the notifier
hashtable accesses. This ensures that read-side locking does not sleep and
multiple readers can acquire the lock concurrently, avoiding unnecessary
contention and potential deadlocks. Writer access remains exclusive,
preserving correctness.
This change resolves warnings from lockdep about potential sleep in
atomic context. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mlx5: Fix potential deadlock in MR deregistration
The issue arises when kzalloc() is invoked while holding umem_mutex or
any other lock acquired under umem_mutex. This is problematic because
kzalloc() can trigger fs_reclaim_aqcuire(), which may, in turn, invoke
mmu_notifier_invalidate_range_start(). This function can lead to
mlx5_ib_invalidate_range(), which attempts to acquire umem_mutex again,
resulting in a deadlock.
The problematic flow:
CPU0 | CPU1
---------------------------------------|------------------------------------------------
mlx5_ib_dereg_mr() |
→ revoke_mr() |
→ mutex_lock(&umem_odp->umem_mutex) |
| mlx5_mkey_cache_init()
| → mutex_lock(&dev->cache.rb_lock)
| → mlx5r_cache_create_ent_locked()
| → kzalloc(GFP_KERNEL)
| → fs_reclaim()
| → mmu_notifier_invalidate_range_start()
| → mlx5_ib_invalidate_range()
| → mutex_lock(&umem_odp->umem_mutex)
→ cache_ent_find_and_store() |
→ mutex_lock(&dev->cache.rb_lock) |
Additionally, when kzalloc() is called from within
cache_ent_find_and_store(), we encounter the same deadlock due to
re-acquisition of umem_mutex.
Solve by releasing umem_mutex in dereg_mr() after umr_revoke_mr()
and before acquiring rb_lock. This ensures that we don't hold
umem_mutex while performing memory allocations that could trigger
the reclaim path.
This change prevents the deadlock by ensuring proper lock ordering and
avoiding holding locks during memory allocation operations that could
trigger the reclaim path.
The following lockdep warning demonstrates the deadlock:
python3/20557 is trying to acquire lock:
ffff888387542128 (&umem_odp->umem_mutex){+.+.}-{4:4}, at:
mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib]
but task is already holding lock:
ffffffff82f6b840 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at:
unmap_vmas+0x7b/0x1a0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}:
fs_reclaim_acquire+0x60/0xd0
mem_cgroup_css_alloc+0x6f/0x9b0
cgroup_init_subsys+0xa4/0x240
cgroup_init+0x1c8/0x510
start_kernel+0x747/0x760
x86_64_start_reservations+0x25/0x30
x86_64_start_kernel+0x73/0x80
common_startup_64+0x129/0x138
-> #2 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0x91/0xd0
__kmalloc_cache_noprof+0x4d/0x4c0
mlx5r_cache_create_ent_locked+0x75/0x620 [mlx5_ib]
mlx5_mkey_cache_init+0x186/0x360 [mlx5_ib]
mlx5_ib_stage_post_ib_reg_umr_init+0x3c/0x60 [mlx5_ib]
__mlx5_ib_add+0x4b/0x190 [mlx5_ib]
mlx5r_probe+0xd9/0x320 [mlx5_ib]
auxiliary_bus_probe+0x42/0x70
really_probe+0xdb/0x360
__driver_probe_device+0x8f/0x130
driver_probe_device+0x1f/0xb0
__driver_attach+0xd4/0x1f0
bus_for_each_dev+0x79/0xd0
bus_add_driver+0xf0/0x200
driver_register+0x6e/0xc0
__auxiliary_driver_register+0x6a/0xc0
do_one_initcall+0x5e/0x390
do_init_module+0x88/0x240
init_module_from_file+0x85/0xc0
idempotent_init_module+0x104/0x300
__x64_sys_finit_module+0x68/0xc0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
-> #1 (&dev->cache.rb_lock){+.+.}-{4:4}:
__mutex_lock+0x98/0xf10
__mlx5_ib_dereg_mr+0x6f2/0x890 [mlx5_ib]
mlx5_ib_dereg_mr+0x21/0x110 [mlx5_ib]
ib_dereg_mr_user+0x85/0x1f0 [ib_core]
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Allow CPU to reschedule while setting per-page memory attributes
When running an SEV-SNP guest with a sufficiently large amount of memory (1TB+),
the host can experience CPU soft lockups when running an operation in
kvm_vm_set_mem_attributes() to set memory attributes on the whole
range of guest memory.
watchdog: BUG: soft lockup - CPU#8 stuck for 26s! [qemu-kvm:6372]
CPU: 8 UID: 0 PID: 6372 Comm: qemu-kvm Kdump: loaded Not tainted 6.15.0-rc7.20250520.el9uek.rc1.x86_64 #1 PREEMPT(voluntary)
Hardware name: Oracle Corporation ORACLE SERVER E4-2c/Asm,MB Tray,2U,E4-2c, BIOS 78016600 11/13/2024
RIP: 0010:xas_create+0x78/0x1f0
Code: 00 00 00 41 80 fc 01 0f 84 82 00 00 00 ba 06 00 00 00 bd 06 00 00 00 49 8b 45 08 4d 8d 65 08 41 39 d6 73 20 83 ed 06 48 85 c0 <74> 67 48 89 c2 83 e2 03 48 83 fa 02 75 0c 48 3d 00 10 00 00 0f 87
RSP: 0018:ffffad890a34b940 EFLAGS: 00000286
RAX: ffff96f30b261daa RBX: ffffad890a34b9c8 RCX: 0000000000000000
RDX: 000000000000001e RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000018 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffad890a356868
R13: ffffad890a356860 R14: 0000000000000000 R15: ffffad890a356868
FS: 00007f5578a2a400(0000) GS:ffff97ed317e1000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f015c70fb18 CR3: 00000001109fd006 CR4: 0000000000f70ef0
PKRU: 55555554
Call Trace:
<TASK>
xas_store+0x58/0x630
__xa_store+0xa5/0x130
xa_store+0x2c/0x50
kvm_vm_set_mem_attributes+0x343/0x710 [kvm]
kvm_vm_ioctl+0x796/0xab0 [kvm]
__x64_sys_ioctl+0xa3/0xd0
do_syscall_64+0x8c/0x7a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f5578d031bb
Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2d 4c 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe0a742b88 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000000004020aed2 RCX: 00007f5578d031bb
RDX: 00007ffe0a742c80 RSI: 000000004020aed2 RDI: 000000000000000b
RBP: 0000010000000000 R08: 0000010000000000 R09: 0000017680000000
R10: 0000000000000080 R11: 0000000000000246 R12: 00005575e5f95120
R13: 00007ffe0a742c80 R14: 0000000000000008 R15: 00005575e5f961e0
While looping through the range of memory setting the attributes,
call cond_resched() to give the scheduler a chance to run a higher
priority task on the runqueue if necessary and avoid staying in
kernel mode long enough to trigger the lockup. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem, swap: fix softlockup with mTHP swapin
Following softlockup can be easily reproduced on my test machine with:
echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled
swapon /dev/zram0 # zram0 is a 48G swap device
mkdir -p /sys/fs/cgroup/memory/test
echo 1G > /sys/fs/cgroup/test/memory.max
echo $BASHPID > /sys/fs/cgroup/test/cgroup.procs
while true; do
dd if=/dev/zero of=/tmp/test.img bs=1M count=5120
cat /tmp/test.img > /dev/null
rm /tmp/test.img
done
Then after a while:
watchdog: BUG: soft lockup - CPU#0 stuck for 763s! [cat:5787]
Modules linked in: zram virtiofs
CPU: 0 UID: 0 PID: 5787 Comm: cat Kdump: loaded Tainted: G L 6.15.0.orig-gf3021d9246bc-dirty #118 PREEMPT(voluntary)·
Tainted: [L]=SOFTLOCKUP
Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015
RIP: 0010:mpol_shared_policy_lookup+0xd/0x70
Code: e9 b8 b4 ff ff 31 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 41 54 55 53 <48> 8b 1f 48 85 db 74 41 4c 8d 67 08 48 89 fb 48 89 f5 4c 89 e7 e8
RSP: 0018:ffffc90002b1fc28 EFLAGS: 00000202
RAX: 00000000001c20ca RBX: 0000000000724e1e RCX: 0000000000000001
RDX: ffff888118e214c8 RSI: 0000000000057d42 RDI: ffff888118e21518
RBP: 000000000002bec8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000bf4 R11: 0000000000000000 R12: 0000000000000001
R13: 00000000001c20ca R14: 00000000001c20ca R15: 0000000000000000
FS: 00007f03f995c740(0000) GS:ffff88a07ad9a000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f03f98f1000 CR3: 0000000144626004 CR4: 0000000000770eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
shmem_alloc_folio+0x31/0xc0
shmem_swapin_folio+0x309/0xcf0
? filemap_get_entry+0x117/0x1e0
? xas_load+0xd/0xb0
? filemap_get_entry+0x101/0x1e0
shmem_get_folio_gfp+0x2ed/0x5b0
shmem_file_read_iter+0x7f/0x2e0
vfs_read+0x252/0x330
ksys_read+0x68/0xf0
do_syscall_64+0x4c/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f03f9a46991
Code: 00 48 8b 15 81 14 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d 35 97 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec
RSP: 002b:00007fff3c52bd28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007f03f9a46991
RDX: 0000000000040000 RSI: 00007f03f98ba000 RDI: 0000000000000003
RBP: 00007fff3c52bd50 R08: 0000000000000000 R09: 00007f03f9b9a380
R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000
R13: 00007f03f98ba000 R14: 0000000000000003 R15: 0000000000000000
</TASK>
The reason is simple, readahead brought some order 0 folio in swap cache,
and the swapin mTHP folio being allocated is in conflict with it, so
swapcache_prepare fails and causes shmem_swap_alloc_folio to return
-EEXIST, and shmem simply retries again and again causing this loop.
Fix it by applying a similar fix for anon mTHP swapin.
The performance change is very slight, time of swapin 10g zero folios
with shmem (test for 12 times):
Before: 2.47s
After: 2.48s
[kasong@tencent.com: add comment] |
| In the Linux kernel, the following vulnerability has been resolved:
riscv:uprobe fix SR_SPIE set/clear handling
In riscv the process of uprobe going to clear spie before exec
the origin insn,and set spie after that.But When access the page
which origin insn has been placed a page fault may happen and
irq was disabled in arch_uprobe_pre_xol function,It cause a WARN
as follows.
There is no need to clear/set spie in arch_uprobe_pre/post/abort_xol.
We can just remove it.
[ 31.684157] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1488
[ 31.684677] in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 76, name: work
[ 31.684929] preempt_count: 0, expected: 0
[ 31.685969] CPU: 2 PID: 76 Comm: work Tainted: G
[ 31.686542] Hardware name: riscv-virtio,qemu (DT)
[ 31.686797] Call Trace:
[ 31.687053] [<ffffffff80006442>] dump_backtrace+0x30/0x38
[ 31.687699] [<ffffffff80812118>] show_stack+0x40/0x4c
[ 31.688141] [<ffffffff8081817a>] dump_stack_lvl+0x44/0x5c
[ 31.688396] [<ffffffff808181aa>] dump_stack+0x18/0x20
[ 31.688653] [<ffffffff8003e454>] __might_resched+0x114/0x122
[ 31.688948] [<ffffffff8003e4b2>] __might_sleep+0x50/0x7a
[ 31.689435] [<ffffffff80822676>] down_read+0x30/0x130
[ 31.689728] [<ffffffff8000b650>] do_page_fault+0x166/x446
[ 31.689997] [<ffffffff80003c0c>] ret_from_exception+0x0/0xc |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: fix recursived rtnl_lock() during probe()
The deadlock appears in a stack trace like:
virtnet_probe()
rtnl_lock()
virtio_config_changed_work()
netdev_notify_peers()
rtnl_lock()
It happens if the VMM sends a VIRTIO_NET_S_ANNOUNCE request while the
virtio-net driver is still probing.
The config_work in probe() will get scheduled until virtnet_open() enables
the config change notification via virtio_config_driver_enable(). |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: fix potential deadlock in __driver_attach
In __driver_attach function, There are also AA deadlock problem,
like the commit b232b02bf3c2 ("driver core: fix deadlock in
__device_attach").
stack like commit b232b02bf3c2 ("driver core: fix deadlock in
__device_attach").
list below:
In __driver_attach function, The lock holding logic is as follows:
...
__driver_attach
if (driver_allows_async_probing(drv))
device_lock(dev) // get lock dev
async_schedule_dev(__driver_attach_async_helper, dev); // func
async_schedule_node
async_schedule_node_domain(func)
entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC);
/* when fail or work limit, sync to execute func, but
__driver_attach_async_helper will get lock dev as
will, which will lead to A-A deadlock. */
if (!entry || atomic_read(&entry_count) > MAX_WORK) {
func;
else
queue_work_node(node, system_unbound_wq, &entry->work)
device_unlock(dev)
As above show, when it is allowed to do async probes, because of
out of memory or work limit, async work is not be allowed, to do
sync execute instead. it will lead to A-A deadlock because of
__driver_attach_async_helper getting lock dev.
Reproduce:
and it can be reproduce by make the condition
(if (!entry || atomic_read(&entry_count) > MAX_WORK)) untenable, like
below:
[ 370.785650] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
this message.
[ 370.787154] task:swapper/0 state:D stack: 0 pid: 1 ppid:
0 flags:0x00004000
[ 370.788865] Call Trace:
[ 370.789374] <TASK>
[ 370.789841] __schedule+0x482/0x1050
[ 370.790613] schedule+0x92/0x1a0
[ 370.791290] schedule_preempt_disabled+0x2c/0x50
[ 370.792256] __mutex_lock.isra.0+0x757/0xec0
[ 370.793158] __mutex_lock_slowpath+0x1f/0x30
[ 370.794079] mutex_lock+0x50/0x60
[ 370.794795] __device_driver_lock+0x2f/0x70
[ 370.795677] ? driver_probe_device+0xd0/0xd0
[ 370.796576] __driver_attach_async_helper+0x1d/0xd0
[ 370.797318] ? driver_probe_device+0xd0/0xd0
[ 370.797957] async_schedule_node_domain+0xa5/0xc0
[ 370.798652] async_schedule_node+0x19/0x30
[ 370.799243] __driver_attach+0x246/0x290
[ 370.799828] ? driver_allows_async_probing+0xa0/0xa0
[ 370.800548] bus_for_each_dev+0x9d/0x130
[ 370.801132] driver_attach+0x22/0x30
[ 370.801666] bus_add_driver+0x290/0x340
[ 370.802246] driver_register+0x88/0x140
[ 370.802817] ? virtio_scsi_init+0x116/0x116
[ 370.803425] scsi_register_driver+0x1a/0x30
[ 370.804057] init_sd+0x184/0x226
[ 370.804533] do_one_initcall+0x71/0x3a0
[ 370.805107] kernel_init_freeable+0x39a/0x43a
[ 370.805759] ? rest_init+0x150/0x150
[ 370.806283] kernel_init+0x26/0x230
[ 370.806799] ret_from_fork+0x1f/0x30
To fix the deadlock, move the async_schedule_dev outside device_lock,
as we can see, in async_schedule_node_domain, the parameter of
queue_work_node is system_unbound_wq, so it can accept concurrent
operations. which will also not change the code logic, and will
not lead to deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix deadlock in ivpu_ms_cleanup()
Fix deadlock in ivpu_ms_cleanup() by preventing runtime resume after
file_priv->ms_lock is acquired.
During a failure in runtime resume, a cold boot is executed, which
calls ivpu_ms_cleanup_all(). This function calls ivpu_ms_cleanup()
that acquires file_priv->ms_lock and causes the deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: storvsc: Remove WQ_MEM_RECLAIM from storvsc_error_wq
storvsc_error_wq workqueue should not be marked as WQ_MEM_RECLAIM as it
doesn't need to make forward progress under memory pressure. Marking this
workqueue as WQ_MEM_RECLAIM may cause deadlock while flushing a
non-WQ_MEM_RECLAIM workqueue. In the current state it causes the following
warning:
[ 14.506347] ------------[ cut here ]------------
[ 14.506354] workqueue: WQ_MEM_RECLAIM storvsc_error_wq_0:storvsc_remove_lun is flushing !WQ_MEM_RECLAIM events_freezable_power_:disk_events_workfn
[ 14.506360] WARNING: CPU: 0 PID: 8 at <-snip->kernel/workqueue.c:2623 check_flush_dependency+0xb5/0x130
[ 14.506390] CPU: 0 PID: 8 Comm: kworker/u4:0 Not tainted 5.4.0-1086-azure #91~18.04.1-Ubuntu
[ 14.506391] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022
[ 14.506393] Workqueue: storvsc_error_wq_0 storvsc_remove_lun
[ 14.506395] RIP: 0010:check_flush_dependency+0xb5/0x130
<-snip->
[ 14.506408] Call Trace:
[ 14.506412] __flush_work+0xf1/0x1c0
[ 14.506414] __cancel_work_timer+0x12f/0x1b0
[ 14.506417] ? kernfs_put+0xf0/0x190
[ 14.506418] cancel_delayed_work_sync+0x13/0x20
[ 14.506420] disk_block_events+0x78/0x80
[ 14.506421] del_gendisk+0x3d/0x2f0
[ 14.506423] sr_remove+0x28/0x70
[ 14.506427] device_release_driver_internal+0xef/0x1c0
[ 14.506428] device_release_driver+0x12/0x20
[ 14.506429] bus_remove_device+0xe1/0x150
[ 14.506431] device_del+0x167/0x380
[ 14.506432] __scsi_remove_device+0x11d/0x150
[ 14.506433] scsi_remove_device+0x26/0x40
[ 14.506434] storvsc_remove_lun+0x40/0x60
[ 14.506436] process_one_work+0x209/0x400
[ 14.506437] worker_thread+0x34/0x400
[ 14.506439] kthread+0x121/0x140
[ 14.506440] ? process_one_work+0x400/0x400
[ 14.506441] ? kthread_park+0x90/0x90
[ 14.506443] ret_from_fork+0x35/0x40
[ 14.506445] ---[ end trace 2d9633159fdc6ee7 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: Fix reset error handling
Do not call iavf_close in iavf_reset_task error handling. Doing so can
lead to double call of napi_disable, which can lead to deadlock there.
Removing VF would lead to iavf_remove task being stuck, because it
requires crit_lock, which is held by iavf_close.
Call iavf_disable_vf if reset fail, so that driver will clean up
remaining invalid resources.
During rapid VF resets, HW can fail to setup VF mailbox. Wrong
error handling can lead to iavf_remove being stuck with:
[ 5218.999087] iavf 0000:82:01.0: Failed to init adminq: -53
...
[ 5267.189211] INFO: task repro.sh:11219 blocked for more than 30 seconds.
[ 5267.189520] Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1
[ 5267.189764] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 5267.190062] task:repro.sh state:D stack: 0 pid:11219 ppid: 8162 flags:0x00000000
[ 5267.190347] Call Trace:
[ 5267.190647] <TASK>
[ 5267.190927] __schedule+0x460/0x9f0
[ 5267.191264] schedule+0x44/0xb0
[ 5267.191563] schedule_preempt_disabled+0x14/0x20
[ 5267.191890] __mutex_lock.isra.12+0x6e3/0xac0
[ 5267.192237] ? iavf_remove+0xf9/0x6c0 [iavf]
[ 5267.192565] iavf_remove+0x12a/0x6c0 [iavf]
[ 5267.192911] ? _raw_spin_unlock_irqrestore+0x1e/0x40
[ 5267.193285] pci_device_remove+0x36/0xb0
[ 5267.193619] device_release_driver_internal+0xc1/0x150
[ 5267.193974] pci_stop_bus_device+0x69/0x90
[ 5267.194361] pci_stop_and_remove_bus_device+0xe/0x20
[ 5267.194735] pci_iov_remove_virtfn+0xba/0x120
[ 5267.195130] sriov_disable+0x2f/0xe0
[ 5267.195506] ice_free_vfs+0x7d/0x2f0 [ice]
[ 5267.196056] ? pci_get_device+0x4f/0x70
[ 5267.196496] ice_sriov_configure+0x78/0x1a0 [ice]
[ 5267.196995] sriov_numvfs_store+0xfe/0x140
[ 5267.197466] kernfs_fop_write_iter+0x12e/0x1c0
[ 5267.197918] new_sync_write+0x10c/0x190
[ 5267.198404] vfs_write+0x24e/0x2d0
[ 5267.198886] ksys_write+0x5c/0xd0
[ 5267.199367] do_syscall_64+0x3a/0x80
[ 5267.199827] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 5267.200317] RIP: 0033:0x7f5b381205c8
[ 5267.200814] RSP: 002b:00007fff8c7e8c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 5267.201981] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5b381205c8
[ 5267.202620] RDX: 0000000000000002 RSI: 00005569420ee900 RDI: 0000000000000001
[ 5267.203426] RBP: 00005569420ee900 R08: 000000000000000a R09: 00007f5b38180820
[ 5267.204327] R10: 000000000000000a R11: 0000000000000246 R12: 00007f5b383c06e0
[ 5267.205193] R13: 0000000000000002 R14: 00007f5b383bb880 R15: 0000000000000002
[ 5267.206041] </TASK>
[ 5267.206970] Kernel panic - not syncing: hung_task: blocked tasks
[ 5267.207809] CPU: 48 PID: 551 Comm: khungtaskd Kdump: loaded Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1
[ 5267.208726] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019
[ 5267.209623] Call Trace:
[ 5267.210569] <TASK>
[ 5267.211480] dump_stack_lvl+0x33/0x42
[ 5267.212472] panic+0x107/0x294
[ 5267.213467] watchdog.cold.8+0xc/0xbb
[ 5267.214413] ? proc_dohung_task_timeout_secs+0x30/0x30
[ 5267.215511] kthread+0xf4/0x120
[ 5267.216459] ? kthread_complete_and_exit+0x20/0x20
[ 5267.217505] ret_from_fork+0x22/0x30
[ 5267.218459] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: Fix deadlock when using NCM gadget
The cdns3 driver has the same NCM deadlock as fixed in cdnsp by commit
58f2fcb3a845 ("usb: cdnsp: Fix deadlock issue during using NCM gadget").
Under PREEMPT_RT the deadlock can be readily triggered by heavy network
traffic, for example using "iperf --bidir" over NCM ethernet link.
The deadlock occurs because the threaded interrupt handler gets
preempted by a softirq, but both are protected by the same spinlock.
Prevent deadlock by disabling softirq during threaded irq handler. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/userptr: fix notifier vs folio deadlock
User is reporting what smells like notifier vs folio deadlock, where
migrate_pages_batch() on core kernel side is holding folio lock(s) and
then interacting with the mappings of it, however those mappings are
tied to some userptr, which means calling into the notifier callback and
grabbing the notifier lock. With perfect timing it looks possible that
the pages we pulled from the hmm fault can get sniped by
migrate_pages_batch() at the same time that we are holding the notifier
lock to mark the pages as accessed/dirty, but at this point we also want
to grab the folio locks(s) to mark them as dirty, but if they are
contended from notifier/migrate_pages_batch side then we deadlock since
folio lock won't be dropped until we drop the notifier lock.
Fortunately the mark_page_accessed/dirty is not really needed in the
first place it seems and should have already been done by hmm fault, so
just remove it.
(cherry picked from commit bd7c0cb695e87c0e43247be8196b4919edbe0e85) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_audio: don't let userspace block driver unbind
In the unbind callback for f_uac1 and f_uac2, a call to snd_card_free()
via g_audio_cleanup() will disconnect the card and then wait for all
resources to be released, which happens when the refcount falls to zero.
Since userspace can keep the refcount incremented by not closing the
relevant file descriptor, the call to unbind may block indefinitely.
This can cause a deadlock during reboot, as evidenced by the following
blocked task observed on my machine:
task:reboot state:D stack:0 pid:2827 ppid:569 flags:0x0000000c
Call trace:
__switch_to+0xc8/0x140
__schedule+0x2f0/0x7c0
schedule+0x60/0xd0
schedule_timeout+0x180/0x1d4
wait_for_completion+0x78/0x180
snd_card_free+0x90/0xa0
g_audio_cleanup+0x2c/0x64
afunc_unbind+0x28/0x60
...
kernel_restart+0x4c/0xac
__do_sys_reboot+0xcc/0x1ec
__arm64_sys_reboot+0x28/0x30
invoke_syscall+0x4c/0x110
...
The issue can also be observed by opening the card with arecord and
then stopping the process through the shell before unbinding:
# arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null
Recording WAVE '/dev/null' : Signed 32 bit Little Endian, Rate 48000 Hz, Stereo
^Z[1]+ Stopped arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null
# echo gadget.0 > /sys/bus/gadget/drivers/configfs-gadget/unbind
(observe that the unbind command never finishes)
Fix the problem by using snd_card_free_when_closed() instead, which will
still disconnect the card as desired, but defer the task of freeing the
resources to the core once userspace closes its file descriptor. |
| IdentityIQ 8.4 and all 8.4 patch levels prior to 8.4p2, IdentityIQ 8.3 and all 8.3 patch levels prior to 8.3p5, IdentityIQ 8.2 and all 8.2 patch levels prior to 8.2p8, and all prior versions allow HTTP/HTTPS access to static content in the IdentityIQ application directory that should be protected. |
| A vulnerability has been identified in SICAM GridEdge (Classic) (All versions < V2.7.3). The affected application uses an improperly protected file to import SSH keys. This could allow attackers with access to the filesystem of the host on which SICAM GridEdge runs to inject a custom SSH key to that file. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: xilinx: don't make a sleepable memory allocation from an atomic context
The following issue was discovered using lockdep:
[ 6.691371] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:209
[ 6.694602] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0
[ 6.702431] 2 locks held by swapper/0/1:
[ 6.706300] #0: ffffff8800f6f188 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x4c/0x90
[ 6.714900] #1: ffffffc009a2abb8 (enable_lock){....}-{2:2}, at: clk_enable_lock+0x4c/0x140
[ 6.723156] irq event stamp: 304030
[ 6.726596] hardirqs last enabled at (304029): [<ffffffc008d17ee0>] _raw_spin_unlock_irqrestore+0xc0/0xd0
[ 6.736142] hardirqs last disabled at (304030): [<ffffffc00876bc5c>] clk_enable_lock+0xfc/0x140
[ 6.744742] softirqs last enabled at (303958): [<ffffffc0080904f0>] _stext+0x4f0/0x894
[ 6.752655] softirqs last disabled at (303951): [<ffffffc0080e53b8>] irq_exit+0x238/0x280
[ 6.760744] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G U 5.15.36 #2
[ 6.768048] Hardware name: xlnx,zynqmp (DT)
[ 6.772179] Call trace:
[ 6.774584] dump_backtrace+0x0/0x300
[ 6.778197] show_stack+0x18/0x30
[ 6.781465] dump_stack_lvl+0xb8/0xec
[ 6.785077] dump_stack+0x1c/0x38
[ 6.788345] ___might_sleep+0x1a8/0x2a0
[ 6.792129] __might_sleep+0x6c/0xd0
[ 6.795655] kmem_cache_alloc_trace+0x270/0x3d0
[ 6.800127] do_feature_check_call+0x100/0x220
[ 6.804513] zynqmp_pm_invoke_fn+0x8c/0xb0
[ 6.808555] zynqmp_pm_clock_getstate+0x90/0xe0
[ 6.813027] zynqmp_pll_is_enabled+0x8c/0x120
[ 6.817327] zynqmp_pll_enable+0x38/0xc0
[ 6.821197] clk_core_enable+0x144/0x400
[ 6.825067] clk_core_enable+0xd4/0x400
[ 6.828851] clk_core_enable+0xd4/0x400
[ 6.832635] clk_core_enable+0xd4/0x400
[ 6.836419] clk_core_enable+0xd4/0x400
[ 6.840203] clk_core_enable+0xd4/0x400
[ 6.843987] clk_core_enable+0xd4/0x400
[ 6.847771] clk_core_enable+0xd4/0x400
[ 6.851555] clk_core_enable_lock+0x24/0x50
[ 6.855683] clk_enable+0x24/0x40
[ 6.858952] fclk_probe+0x84/0xf0
[ 6.862220] platform_probe+0x8c/0x110
[ 6.865918] really_probe+0x110/0x5f0
[ 6.869530] __driver_probe_device+0xcc/0x210
[ 6.873830] driver_probe_device+0x64/0x140
[ 6.877958] __driver_attach+0x114/0x1f0
[ 6.881828] bus_for_each_dev+0xe8/0x160
[ 6.885698] driver_attach+0x34/0x50
[ 6.889224] bus_add_driver+0x228/0x300
[ 6.893008] driver_register+0xc0/0x1e0
[ 6.896792] __platform_driver_register+0x44/0x60
[ 6.901436] fclk_driver_init+0x1c/0x28
[ 6.905220] do_one_initcall+0x104/0x590
[ 6.909091] kernel_init_freeable+0x254/0x2bc
[ 6.913390] kernel_init+0x24/0x130
[ 6.916831] ret_from_fork+0x10/0x20
Fix it by passing the GFP_ATOMIC gfp flag for the corresponding
memory allocation. |
| A flaw was found in the way the "flags" member of the new pipe buffer structure was lacking proper initialization in copy_page_to_iter_pipe and push_pipe functions in the Linux kernel and could thus contain stale values. An unprivileged local user could use this flaw to write to pages in the page cache backed by read only files and as such escalate their privileges on the system. |
| The attacker can use the raft server protocol in an unauthenticated way. The attacker can see the server's resources, including directories and files.
This issue affects Apache Zeppelin: from 0.10.1 up to 0.12.0.
Users are recommended to upgrade to version 0.12.0, which fixes the issue by removing the Cluster Interpreter. |
| SENEC Storage Box V1,V2 and V3 accidentially expose a management UI accessible with publicly known admin credentials. |
| Cortex-A77 cores (r0p0 and r1p0) are affected by erratum 1508412
where software, under certain circumstances, could deadlock a core
due to the execution of either a load to device or non-cacheable memory,
and either a store exclusive or register read of the Physical
Address Register (PAR_EL1) in close proximity.
|
