| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper authentication in Samsung Pass prior to version 4.2.03.1 allows local attacker to access stored account information when Samsung Wallet is not installed. |
| Authentication bypass vulnerability in multiple Buffalo network devices allows a network-adjacent attacker to bypass authentication and access the device. The affected products/versions are as follows: WCR-300 firmware Ver. 1.87 and earlier, WHR-HP-G300N firmware Ver. 2.00 and earlier, WHR-HP-GN firmware Ver. 1.87 and earlier, WPL-05G300 firmware Ver. 1.88 and earlier, WRM-D2133HP firmware Ver. 2.85 and earlier, WRM-D2133HS firmware Ver. 2.96 and earlier, WTR-M2133HP firmware Ver. 2.85 and earlier, WTR-M2133HS firmware Ver. 2.96 and earlier, WXR-1900DHP firmware Ver. 2.50 and earlier, WXR-1900DHP2 firmware Ver. 2.59 and earlier, WXR-1900DHP3 firmware Ver. 2.63 and earlier, WXR-5950AX12 firmware Ver. 3.40 and earlier, WXR-6000AX12B firmware Ver. 3.40 and earlier, WXR-6000AX12S firmware Ver. 3.40 and earlier, WZR-300HP firmware Ver. 2.00 and earlier, WZR-450HP firmware Ver. 2.00 and earlier, WZR-600DHP firmware Ver. 2.00 and earlier, WZR-900DHP firmware Ver. 1.15 and earlier, WZR-1750DHP2 firmware Ver. 2.31 and earlier, WZR-HP-AG300H firmware Ver. 1.76 and earlier, WZR-HP-G302H firmware Ver. 1.86 and earlier, WEM-1266 firmware Ver. 2.85 and earlier, WEM-1266WP firmware Ver. 2.85 and earlier, WLAE-AG300N firmware Ver. 1.86 and earlier, FS-600DHP firmware Ver. 3.40 and earlier, FS-G300N firmware Ver. 3.14 and earlier, FS-HP-G300N firmware Ver. 3.33 and earlier, FS-R600DHP firmware Ver. 3.40 and earlier, BHR-4GRV firmware Ver. 2.00 and earlier, DWR-HP-G300NH firmware Ver. 1.84 and earlier, DWR-PG firmware Ver. 1.83 and earlier, HW-450HP-ZWE firmware Ver. 2.00 and earlier, WER-A54G54 firmware Ver. 1.43 and earlier, WER-AG54 firmware Ver. 1.43 and earlier, WER-AM54G54 firmware Ver. 1.43 and earlier, WER-AMG54 firmware Ver. 1.43 and earlier, WHR-300 firmware Ver. 2.00 and earlier, WHR-300HP firmware Ver. 2.00 and earlier, WHR-AM54G54 firmware Ver. 1.43 and earlier, WHR-AMG54 firmware Ver. 1.43 and earlier, WHR-AMPG firmware Ver. 1.52 and earlier, WHR-G firmware Ver. 1.49 and earlier, WHR-G300N firmware Ver. 1.65 and earlier, WHR-G301N firmware Ver. 1.87 and earlier, WHR-G54S firmware Ver. 1.43 and earlier, WHR-G54S-NI firmware Ver. 1.24 and earlier, WHR-HP-AMPG firmware Ver. 1.43 and earlier, WHR-HP-G firmware Ver. 1.49 and earlier, WHR-HP-G54 firmware Ver. 1.43 and earlier, WLI-H4-D600 firmware Ver. 1.88 and earlier, WS024BF firmware Ver. 1.60 and earlier, WS024BF-NW firmware Ver. 1.60 and earlier, WXR-1750DHP firmware Ver. 2.60 and earlier, WXR-1750DHP2 firmware Ver. 2.60 and earlier, WZR-1166DHP firmware Ver. 2.18 and earlier, WZR-1166DHP2 firmware Ver. 2.18 and earlier, WZR-1750DHP firmware Ver. 2.30 and earlier, WZR2-G300N firmware Ver. 1.55 and earlier, WZR-450HP-CWT firmware Ver. 2.00 and earlier, WZR-450HP-UB firmware Ver. 2.00 and earlier, WZR-600DHP2 firmware Ver. 1.15 and earlier, WZR-600DHP3 firmware Ver. 2.19 and earlier, WZR-900DHP2 firmware Ver. 2.19 and earlier, WZR-AGL300NH firmware Ver. 1.55 and earlier, WZR-AMPG144NH firmware Ver. 1.49 and earlier, WZR-AMPG300NH firmware Ver. 1.51 and earlier, WZR-D1100H firmware Ver. 2.00 and earlier, WZR-G144N firmware Ver. 1.48 and earlier, WZR-G144NH firmware Ver. 1.48 and earlier, WZR-HP-G300NH firmware Ver. 1.84 and earlier, WZR-HP-G301NH firmware Ver. 1.84 and earlier, WZR-HP-G450H firmware Ver. 1.90 and earlier, WZR-S1750DHP firmware Ver. 2.32 and earlier, WZR-S600DHP firmware Ver. 2.19 and earlier, and WZR-S900DHP firmware Ver. 2.19 and earlier. |
| Bifrost is a heterogeneous middleware that synchronizes MySQL, MariaDB to Redis, MongoDB, ClickHouse, MySQL and other services for production environments. Versions prior to 1.8.8-release are subject to authentication bypass in the admin and monitor user groups by deleting the X-Requested-With: XMLHttpRequest field in the request header. This issue has been patched in 1.8.8-release. There are no known workarounds. |
| Tovy is a a staff management system for Roblox groups. A vulnerability in versions prior to 0.7.51 allows users to log in as other users, including privileged users such as the other of the instance. The problem has been patched in version 0.7.51. |
| Wire is an encrypted communication and collaboration platform. Versions prior to 2022-07-12/Chart 4.19.0 are subject to Token Recipient Confusion. If an attacker has certain details of SAML IdP metadata, and configures their own SAML on the same backend, the attacker can delete all SAML authenticated accounts of a targeted team, Authenticate as a user of the attacked team and create arbitrary accounts in the context of the team if it is not managed by SCIM. This issue is fixed in wire-server 2022-07-12 and is already deployed on all Wire managed services. On-premise instances of wire-server need to be updated to 2022-07-12/Chart 4.19.0, so that their backends are no longer affected. As a workaround, the risk of an attack can be reduced by disabling SAML configuration for teams (galley.config.settings.featureFlags.sso). Helm overrides are located in `values/wire-server/values.yaml` Note that the ability to configure SAML SSO as a team is disabled by default for on-premise installations. |
| A vulnerability was found in SourceCodester Company Website CMS 1.0. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /dashboard/settings. The manipulation leads to improper authentication. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-206161 was assigned to this vulnerability. |
| django-mfa3 is a library that implements multi factor authentication for the django web framework. It achieves this by modifying the regular login view. Django however has a second login view for its admin area. This second login view was not modified, so the multi factor authentication can be bypassed. Users are affected if they have activated both django-mfa3 (< 0.5.0) and django.contrib.admin and have not taken any other measures to prevent users from accessing the admin login view. The issue has been fixed in django-mfa3 0.5.0. It is possible to work around the issue by overwriting the admin login route, e.g. by adding the following URL definition *before* the admin routes: url('admin/login/', lambda request: redirect(settings.LOGIN_URL) |
| Passport-wsfed-saml2 is a ws-federation protocol and SAML2 tokens authentication provider for Passport. In versions prior to 4.6.3, a remote attacker may be able to bypass WSFed authentication on a website using passport-wsfed-saml2. A successful attack requires that the attacker is in possession of an arbitrary IDP signed assertion. Depending on the IDP used, fully unauthenticated attacks (e.g without access to a valid user) might also be feasible if generation of a signed message can be triggered. This issue is patched in version 4.6.3. Use of SAML2 authentication instead of WSFed is a workaround. |
| An issue was discovered in SaltStack Salt in versions before 3002.8, 3003.4, 3004.1. A minion authentication denial of service can cause a MiTM attacker to force a minion process to stop by impersonating a master. |
| Improper authentication in the Intel(R) Edge Insights for Industrial software before version 2.6.1 may allow an unauthenticated user to potentially enable escalation of privilege via network access. |
| Discourse is an open source discussion platform. Versions prior to 2.7.13 in `stable`, 2.8.0.beta11 in `beta`, and 2.8.0.beta11 in `tests-passed` allow some users to log in to a community before they should be able to do so. A user invited via email to a forum with `must_approve_users` enabled is going to be automatically logged in, bypassing the check that does not allow unapproved users to sign in. They will be able to do everything an approved user can do. If they logout, they cannot log back in. This issue is patched in the `stable` version 2.7.13, `beta` version 2.8.0.beta11, and `tests-passed` version 2.8.0.beta11. One may disable invites as a workaround. Administrators can increase `min_trust_level_to_allow_invite` to reduce the attack surface to more trusted users. |
| A vulnerability in the peering authentication in Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an unauthenticated, remote attacker to bypass authentication and obtain administrative privileges on an affected system.
This vulnerability exists because the peering authentication mechanism in an affected system is not working properly. An attacker could exploit this vulnerability by sending crafted requests to an affected system. A successful exploit could allow the attacker to log in to an affected Cisco Catalyst SD-WAN Controller as an internal, high-privileged, non-root user account. Using this account, the attacker could access NETCONF, which would then allow the attacker to manipulate network configuration for the SD-WAN fabric. |
| May 2026: This security advisory provides the details and fix information for a vulnerability that was discovered and fixed after the was disclosed in February 2026. This new advisory is for a new vulnerability in the control connection handshaking. The section of this advisory includes Show Control Connections guidance to help with system checks.
A vulnerability in the peering authentication in Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an unauthenticated, remote attacker to bypass authentication and obtain administrative privileges on an affected system.
This vulnerability exists because the peering authentication mechanism in an affected system is not working properly. An attacker could exploit this vulnerability by sending crafted requests to the affected system. A successful exploit could allow the attacker to log in to an affected Cisco Catalyst SD-WAN Controller as an internal, high-privileged, non-root user account. Using this account, the attacker could access NETCONF, which would then allow the attacker to manipulate network configuration for the SD-WAN fabric. |
| An authentication bypass vulnerability exists in MISP when LDAP mixed authentication is enabled with OTP enforcement. In deployments configured with LdapAuth.mixedAuth=true and Security.require_otp=true, users authenticated through an authentication plugin, such as LDAP, may have their authenticated session established during the application beforeFilter phase before the normal login flow enforces the OTP challenge.
As a result, an attacker with valid primary authentication credentials could bypass the required OTP step by authenticating through the plugin-backed login flow and then directly accessing another application URL instead of completing the OTP verification page. This allows access to the application as the affected user without providing a valid TOTP, HOTP, or email OTP code.
The issue affects configurations where plugin-based authentication is enabled and OTP is expected to be mandatory. The fix ensures that OTP requirements are checked immediately after plugin authentication and before the user session is established, redirecting users to the appropriate OTP challenge when required. |
| On April 18th 2025, Microsoft announced Exchange Server Security Changes for Hybrid Deployments and accompanying non-security Hot Fix. Microsoft made these changes in the general interest of improving the security of hybrid Exchange deployments. Following further investigation, Microsoft identified specific security implications tied to the guidance and configuration steps outlined in the April announcement. Microsoft is issuing CVE-2025-53786 to document a vulnerability that is addressed by taking the steps documented with the April 18th announcement. Microsoft strongly recommends reading the information, installing the April 2025 (or later) Hot Fix and implementing the changes in your Exchange Server and hybrid environment. |
| UDS Identity Config builds the Keycloak configuration image (realm, plugins, theme, truststore, JARs) consumed by UDS Core's Identity deployment. In versions 0.11.0 through 0.26.0, a logic error in the `client-kubernetes-secret` Keycloak client authenticator (shipped by `uds-identity-config` and consumed by UDS Core) causes the submitted `client_secret` to be overwritten with the mounted Kubernetes secret before comparison. An attacker who can reach the Keycloak token endpoint and knows a `client_id` using this authenticator can authenticate as that client with any `client_secret` value and obtain OAuth2 tokens scoped to the client's service account. In the case of the `uds-operator` client this token can be used to registry/modify other clients. Version 0.26.1 patches the issue. |
| The optional ActiveMQ LDAP login module can be configured to use anonymous access to the LDAP server. In this case, for Apache ActiveMQ Artemis prior to version 2.16.0 and Apache ActiveMQ prior to versions 5.16.1 and 5.15.14, the anonymous context is used to verify a valid users password in error, resulting in no check on the password. |
| Authentication Bypass in cf-auth-proxy in Cloud Foundry Foundation all installations allows an unauthenticated remote attacker to gain read access to every log and metric for every application and platform component via minting a JWT that the cf-auth-proxy accepts as a valid logs.admin token.
Affected versions:
- log-cache_release: all versions through v3.2.6 (inclusive); fixed in v3.2.7 or later
- CF Deployment: all versions through v55.?.0 (inclusive); fixed in v55.?.0 or later (bundles log-cache_release v3.2.7) |
| A person with access to a Mac may be able to bypass Login Window. A consistency issue was addressed with improved state handling. This issue is fixed in macOS Monterey 12.4. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-48 and 7.1.2-23, an attacker who can connect to a magick -distribute-cache service can cause a heap buffer over-read in the server process. This issue has been patched in versions 6.9.13-48 and 7.1.2-23. |
