Export limit exceeded: 424788 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (12031 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74517 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Cancel delayed I/O APIC EOI handling before destroying vCPUs Cancel (and flush) the I/O APIC's delayed EOI handling work during the "pre VM destroy" phase, before vCPUs are destroyed, as processing the EOI broadcast will inject another IRQ if the line is asserted, i.e. will try to deliver an IRQ to the target vCPU(s). Canceling the work after vCPUs are destroyed leads to UAF if the delayed work is processed after vCPUs are destroyed. BUG: KASAN: slab-use-after-free in __kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250 Read of size 8 at addr ffff8880499abea0 by task kworker/1:2/1218 CPU: 1 UID: 0 PID: 1218 Comm: kworker/1:2 Not tainted 7.1.0-rc7 #5 PREEMPT(lazy) Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: events kvm_ioapic_eoi_inject_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 print_report+0x139/0x4ad mm/kasan/report.c:482 kasan_report+0xe4/0x1d0 mm/kasan/report.c:595 __kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250 __kvm_irq_delivery_to_apic+0xd8/0xbf0 arch/x86/kvm/lapic.c:1345 kvm_irq_delivery_to_apic arch/x86/kvm/lapic.h:129 ioapic_service+0x308/0x590 arch/x86/kvm/ioapic.c:492 kvm_ioapic_eoi_inject_work+0x13c/0x190 arch/x86/kvm/ioapic.c:532 process_one_work+0xa59/0x19a0 kernel/workqueue.c:3314 process_scheduled_works kernel/workqueue.c:3397 worker_thread+0x5eb/0xe50 kernel/workqueue.c:3478 kthread+0x370/0x450 kernel/kthread.c:436 ret_from_fork+0x72b/0xd30 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Note, the VM is unreachable once kvm_destroy_vm() starts, and scheduling new work via kvm_ioapic_send_eoi() can only be done via KVM_RUN, i.e. requires a live vCPU. Alternatively, KVM could simply destroy the I/O APIC during the "pre" phase of VM destruction, but that gets more than a bit sketchy as KVM expects the I/O APIC to exist if ioapic_in_kernel() is true, and nested virtualization in particular has a bad habit of touching VM-scope state during vCPU destruction. E.g. attempting to free the PIC during the pre phase would lead to a NULL pointer dereference in kvm_cpu_has_extint(), and it's not hard to imagine the I/O APIC having a similar flaw. | ||||
| CVE-2026-74508 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: reject frames without a transaction header hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb->data[0] before checking that the L2CAP SDU contains a transaction header. A connected HIDP peer can send an empty basic-mode SDU and make both paths use an uninitialized byte from skb tailroom. KMSAN reports the use in hidp_session_run(), with the uninitialized value originating in __alloc_skb() through vhci_write(). The control path produces two reports and the interrupt path produces one. The byte can also be controlled by a malformed lower-layer packet. If an HCI ACL packet contains an L2CAP PDU with a declared zero-length payload followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to the declared PDU length before dispatch. The current HIDP path nevertheless consumes the extra byte as HIDP_TRANS_HID_CONTROL | HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this change, the same packet is discarded and a subsequent feature report request succeeds. Pull the transaction header with skb_pull_data() and discard frames that do not contain it. | ||||
| CVE-2026-74485 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: reject a flag character as the field delimiter The registration string starts with a user chosen delimiter that separates the individual fields. So that the field parsers terminate even on a truncated string create_entry() pads the buffer with that same delimiter: memset(buf + count, del, 8); Most fields are scanned for the delimiter with strchr()/scanarg() and happily stop on the padding. The flags field is different: instead of scanning for the delimiter check_special_flags() consumes the flag characters 'P', 'O', 'C' and 'F' and stops at the first byte that is none of them, relying on the trailing delimiter to end the scan. If the delimiter is itself a flag character the padding no longer acts as a terminator. The scan swallows all eight padding bytes and keeps reading past the end of the allocation until it hits a byte that is not a flag character. For example registering PaPEPPxPPiP with 'P' as the delimiter (name "a", type extension, magic "x", interpreter "i", empty flags) leaves the flag scan running off the end of the buffer. The registration is rejected in the end because the parser does not stop exactly at buf + count, but only after the out of bounds read has already happened. With an unlucky allocation layout the scan can walk into an unmapped page; under KASAN it is reported as a slab out of bounds read. binfmt_misc mounts are available to unprivileged users in a user namespace so the read is reachable without privileges. Reject a delimiter that is one of the flag characters up front. Such a registration was always rejected anyway, only after the out of bounds read, so no valid registration string changes meaning. | ||||
| CVE-2026-74476 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: veth: convert frag_list skbs before running XDP A frag_list skb can reach veth with data_len set but nr_frags zero. veth_convert_skb_to_xdp_buff() only converts skbs that are shared, locked, have frags[], or do not have enough headroom. It later uses skb_is_nonlinear() to decide whether to set XDP_FLAGS_HAS_FRAGS and xdp_frags_size. That exposes frag_list data to XDP as if it were stored in frags[], but frags[] is empty. AF_XDP copy mode can then trust the bogus XDP fragment metadata, walk an empty fragment entry, and crash in memcpy() from __xsk_rcv(). Route non-linear skbs through skb_pp_cow_data() before exposing them to XDP, and only advertise XDP frags when the resulting skb has frags[]. skb_copy_bits() already handles frag_list input, and skb_pp_cow_data() builds frags[] output with skb_add_rx_frag(), which is the representation XDP multi-buffer expects. | ||||
| CVE-2026-74474 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: use pskb_network_may_pull() for transmit path header pulls In vxlan_xmit(), arp_reduce(), and vxlan_mdb_entry_skb_get(), pskb_may_pull() was being called to verify the availability of network layer headers (ARP, IPv6/ND, IP/IPv6 MDB keys). However, during transmit skb->data points to the MAC header, so skb_network_offset(skb) is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, len) only checks len bytes from skb->data rather than skb_network_offset(skb) + len, which can leave part of the network header in non-linear frags. Replace these remaining pskb_may_pull() calls with pskb_network_may_pull() to properly account for the MAC header offset. | ||||
| CVE-2026-74473 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: use pskb_network_may_pull() in route_shortcircuit() route_shortcircuit() currently calls pskb_may_pull(skb, sizeof(struct iphdr)) (or ipv6hdr), which checks if bytes are available starting from skb->data. However, in vxlan_xmit(), skb->data points to the MAC header, so skb_network_offset(skb) is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, 20) only checks 20 bytes from skb->data (which is 14 bytes MAC header + 6 bytes of IP header), leaving the rest of the IP header potentially un-pulled in non-linear frags. Subsequent dereferences of ip_hdr(skb)->daddr can read beyond the pulled linear buffer length. Fix this by using pskb_network_may_pull(), which adds skb_network_offset(skb) to the length check to ensure the full network header is present in the linear buffer. | ||||
| CVE-2026-74444 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate DRAW_PRIMITIVES header size before division vmw_cmd_draw() computes maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); where header->size is u32 and is taken straight from the user-supplied command stream. When header->size is less than sizeof(cmd->body) the unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum. Any user-controlled cmd->body.numVertexDecls then passes the bound and the loop dereferences decl[i] far past the end of the kernel command bounce buffer, producing an out-of-bounds read of kernel memory. Reject undersized headers up front. | ||||
| CVE-2026-74410 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix OOB read from firmware RX descriptor exceeding DMA buffer In rtw_pci_rx_napi(), new_len is computed as the sum of pkt_len (14-bit descriptor field, max 16383) and pkt_offset (drv_info_sz + shift, both firmware-controlled). The result can exceed RTK_PCI_RX_BUF_SIZE (11478), causing an out-of-bounds read from the pre-allocated DMA buffer when skb_put_data copies new_len bytes. The USB transport already validates this (rtw_usb_rx_data_put checks against RTW_USB_MAX_RECVBUF_SZ); the PCIe path does not. Add a check that new_len does not exceed the DMA buffer size. | ||||
| CVE-2026-74409 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: add bounds check on firmware mac_id in link lookup The mac_id field in RX descriptors is 8 bits wide (0-255), but assoc_link_on_macid[] has only RTW89_MAX_MAC_ID_NUM (128) entries. While the driver currently assigns mac_id values below 128, the descriptor value comes from firmware and is not validated before use as an array index. Add a defensive bounds check in rtw89_assoc_link_rcu_dereference() to guard against out-of-range firmware values. | ||||
| CVE-2024-58397 | 1 Mp4v2 | 1 Mp4v2 | 2026-10-16 | 6.1 Medium |
| MP4v2 through 2.1.3 contains a heap-based out-of-bounds read in MP4File::GetChapters() that allows attackers to read past heap allocations via crafted QuickTime chapter samples. Attackers can supply an MP4 file whose chapter sample is shorter than its declared title length, crashing applications like mp4chaps or leaking adjacent heap memory into chapter titles. | ||||
| CVE-2026-74377 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Copy WQE to local buffer in non-SRQ receive path For non-SRQ QPs, the responder reads WQE fields directly from the shared queue buffer mapped into userspace. This allows a malicious user to modify fields like num_sge or sge entries while the kernel is processing the WQE, leading to out-of-bounds reads in rxe_resp_check_length() and copy_data(). Introduce get_recv_wqe() that validates num_sge and copies the WQE to a kernel-local buffer before processing, matching the approach already used for SRQ WQEs in get_srq_wqe(). The srq_wqe buffer is reused since SRQ and non-SRQ paths are mutually exclusive per QP. | ||||
| CVE-2026-74361 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix FDP fdpcidx bounds check The fdpcidx bounds check sets n = NUMFDPC + 1 but used > instead of >=, incorrectly accepting fdp_idx when it equals n (i.e. NUMFDPC + 1). | ||||
| CVE-2026-74340 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix OOB read from firmware count in PRINT_REG_INFO indication The firmware-controlled rsp->count field is used as the loop bound for indexing into the flexible rsp->regs[] array without validation against the message length. A count exceeding the actual data causes out-of- bounds reads from the heap-allocated message buffer. Add a check that count fits within the received message. | ||||
| CVE-2026-74333 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-legacy: Bound DAI link iteration create_sdw_dailinks() walks soc_dais until it finds an entry with initialised cleared, but soc_dais is allocated with exactly num_ends entries. If all entries are initialised, the loop reads past the end of the array. This was reported by KASAN: BUG: KASAN: slab-out-of-bounds in mc_probe+0x26b3/0x2774 [snd_acp_sdw_legacy_mach] Read of size 1 Pass the allocated entry count to create_sdw_dailinks() and stop before reading past the array. | ||||
| CVE-2026-74332 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-sof: Bound DAI link iteration create_sdw_dailinks() walks sof_dais until it finds an entry with initialised cleared, but sof_dais is allocated with exactly num_ends entries. If all entries are initialised, the loop reads past the end of the array. Pass the allocated entry count to create_sdw_dailinks() and stop before reading past the array. | ||||
| CVE-2026-74295 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: hdac_hdmi: Validate written enum value hdac_hdmi_set_pin_port_mux() uses the written enum value to index the texts array before calling snd_soc_dapm_put_enum_double(), which validates that the value is within the enum item range. An out-of-range value can therefore make the driver read past the texts array before the helper rejects the write. Move the lookup after the helper has accepted the value. | ||||
| CVE-2026-74293 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl: fsl_audmix: Validate written enum values fsl_audmix_put_mix_clk_src() and fsl_audmix_put_out_src() convert the user-provided enum item with snd_soc_enum_item_to_val() before checking whether the item is within the enum's item count. The generic snd_soc_put_enum_double() helper performs that validation, but these callbacks use the converted value first: the clock-source path tests it with BIT(), and the output-source path indexes the prms transition table with it. Reject out-of-range enum items before converting them. | ||||
| CVE-2026-74287 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: validate embedded address parameter length sctp_verify_asconf() and sctp_verify_param() only validate ADD_IP, DEL_IP, and SET_PRIMARY parameters against a fixed minimum size of sizeof(struct sctp_addip_param) + sizeof(struct sctp_paramhdr). This ensures the outer parameter is large enough to contain an embedded address parameter header, but does not verify that the embedded address parameter's declared length fits within the bounds of the outer parameter. Later, sctp_process_param() and sctp_process_asconf_param() extract the embedded address parameter and pass it to af->from_addr_param(), which uses the address parameter length to parse the variable-length address payload. A malformed peer can therefore advertise an embedded address parameter length that exceeds the remaining bytes in the enclosing parameter. Validate that addr_param->p.length does not exceed the space available after the sctp_addip_param header before processing the embedded address parameter. Reject malformed parameters when the embedded address length extends beyond the enclosing parameter bounds. This prevents out-of-bounds reads when parsing malformed parameters carried in INIT or ASCONF processing paths. | ||||
| CVE-2026-74258 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Guard __get_user acesss with access_ok for uprobe_multi data As reported by sashiko [1] we need to use access_ok to check the user space data bounds before we use __get-user to get it. [1] https://lore.kernel.org/bpf/20260610145235.CB1441F00893@smtp.kernel.org/ | ||||
| CVE-2026-72487 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Check ROM header and data structure addr before accessing We meet a crash when running stress-ng on x86_64 machine: BUG: unable to handle page fault for address: ffa0000007f40000 RIP: 0010:pci_get_rom_size+0x52/0x220 Call Trace: <TASK> pci_map_rom+0x80/0x130 pci_read_rom+0x4b/0xe0 kernfs_file_read_iter+0x96/0x180 vfs_read+0x1b1/0x300 Our analysis reveals that the ROM space's start address is 0xffa0000007f30000, and size is 0x10000. Because of broken ROM space, before calling readl(pds), the pds's value is 0xffa0000007f3ffff, which is already pointed to the ROM space end, invoking readl() would read 4 bytes therefore cause an out-of-bounds access and trigger a crash. Fix this by adding image header and data structure checking. We also found another crash on arm64 machine: Unable to handle kernel paging request at virtual address ffff8000dd1393ff Mem abort info: ESR = 0x0000000096000021 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault The call trace is the same with x86_64, but the crash reason is that the data structure addr is not aligned with 4, and arm64 machine report "alignment fault". Fix this by adding alignment checking. [bhelgaas: shorten function names, wrap comments] | ||||