| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: Shuffle the tx ring before enabling tx
Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board,
the rootfs may take an extended time to recover after a suspend.
Upon investigation, it was determined that the issue originates from a
problem in the macb driver.
According to the Zynq UltraScale TRM [1], when transmit is disabled,
the transmit buffer queue pointer resets to point to the address
specified by the transmit buffer queue base address register.
In the current implementation, the code merely resets `queue->tx_head`
and `queue->tx_tail` to '0'. This approach presents several issues:
- Packets already queued in the tx ring are silently lost,
leading to memory leaks since the associated skbs cannot be released.
- Concurrent write access to `queue->tx_head` and `queue->tx_tail` may
occur from `macb_tx_poll()` or `macb_start_xmit()` when these values
are reset to '0'.
- The transmission may become stuck on a packet that has already been sent
out, with its 'TX_USED' bit set, but has not yet been processed. However,
due to the manipulation of 'queue->tx_head' and 'queue->tx_tail',
`macb_tx_poll()` incorrectly assumes there are no packets to handle
because `queue->tx_head == queue->tx_tail`. This issue is only resolved
when a new packet is placed at this position. This is the root cause of
the prolonged recovery time observed for the NFS root filesystem.
To resolve this issue, shuffle the tx ring and tx skb array so that
the first unsent packet is positioned at the start of the tx ring.
Additionally, ensure that updates to `queue->tx_head` and
`queue->tx_tail` are properly protected with the appropriate lock.
[1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: sar: drop lockdep assertion in rtw89_set_sar_from_acpi
The following assertion is triggered on the rtw89 driver startup. It
looks meaningless to hold wiphy lock on the early init stage so drop the
assertion.
WARNING: CPU: 7 PID: 629 at drivers/net/wireless/realtek/rtw89/sar.c:502 rtw89_set_sar_from_acpi+0x365/0x4d0 [rtw89_core]
CPU: 7 UID: 0 PID: 629 Comm: (udev-worker) Not tainted 6.15.0+ #29 PREEMPT(lazy)
Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN50WW 09/27/2024
RIP: 0010:rtw89_set_sar_from_acpi+0x365/0x4d0 [rtw89_core]
Call Trace:
<TASK>
rtw89_sar_init+0x68/0x2c0 [rtw89_core]
rtw89_core_init+0x188e/0x1e50 [rtw89_core]
rtw89_pci_probe+0x530/0xb50 [rtw89_pci]
local_pci_probe+0xd9/0x190
pci_call_probe+0x183/0x540
pci_device_probe+0x171/0x2c0
really_probe+0x1e1/0x890
__driver_probe_device+0x18c/0x390
driver_probe_device+0x4a/0x120
__driver_attach+0x1a0/0x530
bus_for_each_dev+0x10b/0x190
bus_add_driver+0x2eb/0x540
driver_register+0x1a3/0x3a0
do_one_initcall+0xd5/0x450
do_init_module+0x2cc/0x8f0
init_module_from_file+0xe1/0x150
idempotent_init_module+0x226/0x760
__x64_sys_finit_module+0xcd/0x150
do_syscall_64+0x94/0x380
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Found by Linux Verification Center (linuxtesting.org). |
| Squid is a caching proxy for the Web. Prior to version 7.5, due to premature release of resource during expected lifetime and heap Use-After-Free bugs, Squid is vulnerable to Denial of Service when handling ICP traffic. This problem allows a remote attacker to perform a reliable and repeatable Denial of Service attack against the Squid service using ICP protocol. This attack is limited to Squid deployments that explicitly enable ICP support (i.e. configure non-zero `icp_port`). This problem _cannot_ be mitigated by denying ICP queries using `icp_access` rules. This bug is fixed in Squid version 7.5. |
| Inadequate lock protection within Xilinx Run time may allow a local attacker to trigger a Use-After-Free condition potentially resulting in loss of confidentiality or availability |
| An Improper Resource Locking vulnerability in the SDM component of B&R Automation Runtime versions before 6.3 and before Q4.93 may allow an unauthenticated network-based attacker to delete data causing denial of service conditions. |
| In X.Org X server 20.11 through 21.1.16, when a client application uses easystroke for mouse gestures, the main thread modifies various data structures used by the input thread without acquiring a lock, aka a race condition. In particular, AttachDevice in dix/devices.c does not acquire an input lock. |
| Pterodactyl is a free, open-source game server management panel. Pterodactyl implements rate limits that are applied to the total number of resources (e.g. databases, port allocations, or backups) that can exist for an individual server. These resource limits are applied on a per-server basis, and validated during the request cycle. However, in versions prior to 1.12.0, it is possible for a malicious user to send a massive volume of requests at the same time that would create more resources than the server is allotted. This is because the validation occurs early in the request cycle and does not lock the target resource while it is processing. As a result sending a large volume of requests at the same time would lead all of those requests to validate as not using any of the target resources, and then all creating the resources at the same time. As a result a server would be able to create more databases, allocations, or backups than configured. A malicious user is able to deny resources to other users on the system, and may be able to excessively consume the limited allocations for a node, or fill up backup space faster than is allowed by the system. Version 1.12.0 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children stats
lock_task_sighand() can trigger a hard lockup. If NR_CPUS threads call
do_task_stat() at the same time and the process has NR_THREADS, it will
spin with irqs disabled O(NR_CPUS * NR_THREADS) time.
Change do_task_stat() to use sig->stats_lock to gather the statistics
outside of ->siglock protected section, in the likely case this code will
run lockless. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check rcu_read_lock_trace_held() before calling bpf map helpers
These three bpf_map_{lookup,update,delete}_elem() helpers are also
available for sleepable bpf program, so add the corresponding lock
assertion for sleepable bpf program, otherwise the following warning
will be reported when a sleepable bpf program manipulates bpf map under
interpreter mode (aka bpf_jit_enable=0):
WARNING: CPU: 3 PID: 4985 at kernel/bpf/helpers.c:40 ......
CPU: 3 PID: 4985 Comm: test_progs Not tainted 6.6.0+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
RIP: 0010:bpf_map_lookup_elem+0x54/0x60
......
Call Trace:
<TASK>
? __warn+0xa5/0x240
? bpf_map_lookup_elem+0x54/0x60
? report_bug+0x1ba/0x1f0
? handle_bug+0x40/0x80
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1b/0x20
? __pfx_bpf_map_lookup_elem+0x10/0x10
? rcu_lockdep_current_cpu_online+0x65/0xb0
? rcu_is_watching+0x23/0x50
? bpf_map_lookup_elem+0x54/0x60
? __pfx_bpf_map_lookup_elem+0x10/0x10
___bpf_prog_run+0x513/0x3b70
__bpf_prog_run32+0x9d/0xd0
? __bpf_prog_enter_sleepable_recur+0xad/0x120
? __bpf_prog_enter_sleepable_recur+0x3e/0x120
bpf_trampoline_6442580665+0x4d/0x1000
__x64_sys_getpgid+0x5/0x30
? do_syscall_64+0x36/0xb0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
IB/ipoib: Fix mcast list locking
Releasing the `priv->lock` while iterating the `priv->multicast_list` in
`ipoib_mcast_join_task()` opens a window for `ipoib_mcast_dev_flush()` to
remove the items while in the middle of iteration. If the mcast is removed
while the lock was dropped, the for loop spins forever resulting in a hard
lockup (as was reported on RHEL 4.18.0-372.75.1.el8_6 kernel):
Task A (kworker/u72:2 below) | Task B (kworker/u72:0 below)
-----------------------------------+-----------------------------------
ipoib_mcast_join_task(work) | ipoib_ib_dev_flush_light(work)
spin_lock_irq(&priv->lock) | __ipoib_ib_dev_flush(priv, ...)
list_for_each_entry(mcast, | ipoib_mcast_dev_flush(dev = priv->dev)
&priv->multicast_list, list) |
ipoib_mcast_join(dev, mcast) |
spin_unlock_irq(&priv->lock) |
| spin_lock_irqsave(&priv->lock, flags)
| list_for_each_entry_safe(mcast, tmcast,
| &priv->multicast_list, list)
| list_del(&mcast->list);
| list_add_tail(&mcast->list, &remove_list)
| spin_unlock_irqrestore(&priv->lock, flags)
spin_lock_irq(&priv->lock) |
| ipoib_mcast_remove_list(&remove_list)
(Here, `mcast` is no longer on the | list_for_each_entry_safe(mcast, tmcast,
`priv->multicast_list` and we keep | remove_list, list)
spinning on the `remove_list` of | >>> wait_for_completion(&mcast->done)
the other thread which is blocked |
and the list is still valid on |
it's stack.)
Fix this by keeping the lock held and changing to GFP_ATOMIC to prevent
eventual sleeps.
Unfortunately we could not reproduce the lockup and confirm this fix but
based on the code review I think this fix should address such lockups.
crash> bc 31
PID: 747 TASK: ff1c6a1a007e8000 CPU: 31 COMMAND: "kworker/u72:2"
--
[exception RIP: ipoib_mcast_join_task+0x1b1]
RIP: ffffffffc0944ac1 RSP: ff646f199a8c7e00 RFLAGS: 00000002
RAX: 0000000000000000 RBX: ff1c6a1a04dc82f8 RCX: 0000000000000000
work (&priv->mcast_task{,.work})
RDX: ff1c6a192d60ac68 RSI: 0000000000000286 RDI: ff1c6a1a04dc8000
&mcast->list
RBP: ff646f199a8c7e90 R8: ff1c699980019420 R9: ff1c6a1920c9a000
R10: ff646f199a8c7e00 R11: ff1c6a191a7d9800 R12: ff1c6a192d60ac00
mcast
R13: ff1c6a1d82200000 R14: ff1c6a1a04dc8000 R15: ff1c6a1a04dc82d8
dev priv (&priv->lock) &priv->multicast_list (aka head)
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
--- <NMI exception stack> ---
#5 [ff646f199a8c7e00] ipoib_mcast_join_task+0x1b1 at ffffffffc0944ac1 [ib_ipoib]
#6 [ff646f199a8c7e98] process_one_work+0x1a7 at ffffffff9bf10967
crash> rx ff646f199a8c7e68
ff646f199a8c7e68: ff1c6a1a04dc82f8 <<< work = &priv->mcast_task.work
crash> list -hO ipoib_dev_priv.multicast_list ff1c6a1a04dc8000
(empty)
crash> ipoib_dev_priv.mcast_task.work.func,mcast_mutex.owner.counter ff1c6a1a04dc8000
mcast_task.work.func = 0xffffffffc0944910 <ipoib_mcast_join_task>,
mcast_mutex.owner.counter = 0xff1c69998efec000
crash> b 8
PID: 8 TASK: ff1c69998efec000 CPU: 33 COMMAND: "kworker/u72:0"
--
#3 [ff646f1980153d50] wait_for_completion+0x96 at ffffffff9c7d7646
#4 [ff646f1980153d90] ipoib_mcast_remove_list+0x56 at ffffffffc0944dc6 [ib_ipoib]
#5 [ff646f1980153de8] ipoib_mcast_dev_flush+0x1a7 at ffffffffc09455a7 [ib_ipoib]
#6 [ff646f1980153e58] __ipoib_ib_dev_flush+0x1a4 at ffffffffc09431a4 [ib_ipoib]
#7 [ff
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock
__dma_entry_alloc_check_leak() calls into printk -> serial console
output (qcom geni) and grabs port->lock under free_entries_lock
spin lock, which is a reverse locking dependency chain as qcom_geni
IRQ handler can call into dma-debug code and grab free_entries_lock
under port->lock.
Move __dma_entry_alloc_check_leak() call out of free_entries_lock
scope so that we don't acquire serial console's port->lock under it.
Trimmed-down lockdep splat:
The existing dependency chain (in reverse order) is:
-> #2 (free_entries_lock){-.-.}-{2:2}:
_raw_spin_lock_irqsave+0x60/0x80
dma_entry_alloc+0x38/0x110
debug_dma_map_page+0x60/0xf8
dma_map_page_attrs+0x1e0/0x230
dma_map_single_attrs.constprop.0+0x6c/0xc8
geni_se_rx_dma_prep+0x40/0xcc
qcom_geni_serial_isr+0x310/0x510
__handle_irq_event_percpu+0x110/0x244
handle_irq_event_percpu+0x20/0x54
handle_irq_event+0x50/0x88
handle_fasteoi_irq+0xa4/0xcc
handle_irq_desc+0x28/0x40
generic_handle_domain_irq+0x24/0x30
gic_handle_irq+0xc4/0x148
do_interrupt_handler+0xa4/0xb0
el1_interrupt+0x34/0x64
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x64/0x68
arch_local_irq_enable+0x4/0x8
____do_softirq+0x18/0x24
...
-> #1 (&port_lock_key){-.-.}-{2:2}:
_raw_spin_lock_irqsave+0x60/0x80
qcom_geni_serial_console_write+0x184/0x1dc
console_flush_all+0x344/0x454
console_unlock+0x94/0xf0
vprintk_emit+0x238/0x24c
vprintk_default+0x3c/0x48
vprintk+0xb4/0xbc
_printk+0x68/0x90
register_console+0x230/0x38c
uart_add_one_port+0x338/0x494
qcom_geni_serial_probe+0x390/0x424
platform_probe+0x70/0xc0
really_probe+0x148/0x280
__driver_probe_device+0xfc/0x114
driver_probe_device+0x44/0x100
__device_attach_driver+0x64/0xdc
bus_for_each_drv+0xb0/0xd8
__device_attach+0xe4/0x140
device_initial_probe+0x1c/0x28
bus_probe_device+0x44/0xb0
device_add+0x538/0x668
of_device_add+0x44/0x50
of_platform_device_create_pdata+0x94/0xc8
of_platform_bus_create+0x270/0x304
of_platform_populate+0xac/0xc4
devm_of_platform_populate+0x60/0xac
geni_se_probe+0x154/0x160
platform_probe+0x70/0xc0
...
-> #0 (console_owner){-...}-{0:0}:
__lock_acquire+0xdf8/0x109c
lock_acquire+0x234/0x284
console_flush_all+0x330/0x454
console_unlock+0x94/0xf0
vprintk_emit+0x238/0x24c
vprintk_default+0x3c/0x48
vprintk+0xb4/0xbc
_printk+0x68/0x90
dma_entry_alloc+0xb4/0x110
debug_dma_map_sg+0xdc/0x2f8
__dma_map_sg_attrs+0xac/0xe4
dma_map_sgtable+0x30/0x4c
get_pages+0x1d4/0x1e4 [msm]
msm_gem_pin_pages_locked+0x38/0xac [msm]
msm_gem_pin_vma_locked+0x58/0x88 [msm]
msm_ioctl_gem_submit+0xde4/0x13ac [msm]
drm_ioctl_kernel+0xe0/0x15c
drm_ioctl+0x2e8/0x3f4
vfs_ioctl+0x30/0x50
...
Chain exists of:
console_owner --> &port_lock_key --> free_entries_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(free_entries_lock);
lock(&port_lock_key);
lock(free_entries_lock);
lock(console_owner);
*** DEADLOCK ***
Call trace:
dump_backtrace+0xb4/0xf0
show_stack+0x20/0x30
dump_stack_lvl+0x60/0x84
dump_stack+0x18/0x24
print_circular_bug+0x1cc/0x234
check_noncircular+0x78/0xac
__lock_acquire+0xdf8/0x109c
lock_acquire+0x234/0x284
console_flush_all+0x330/0x454
consol
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p: use a dedicated spinlock for trans_fd
Shamelessly copying the explanation from Tetsuo Handa's suggested
patch[1] (slightly reworded):
syzbot is reporting inconsistent lock state in p9_req_put()[2],
for p9_tag_remove() from p9_req_put() from IRQ context is using
spin_lock_irqsave() on "struct p9_client"->lock but trans_fd
(not from IRQ context) is using spin_lock().
Since the locks actually protect different things in client.c and in
trans_fd.c, just replace trans_fd.c's lock by a new one specific to the
transport (client.c's protect the idr for fid/tag allocations,
while trans_fd.c's protects its own req list and request status field
that acts as the transport's state machine) |
| In the Linux kernel, the following vulnerability has been resolved:
serial: max3100: Lock port->lock when calling uart_handle_cts_change()
uart_handle_cts_change() has to be called with port lock taken,
Since we run it in a separate work, the lock may not be taken at
the time of running. Make sure that it's taken by explicitly doing
that. Without it we got a splat:
WARNING: CPU: 0 PID: 10 at drivers/tty/serial/serial_core.c:3491 uart_handle_cts_change+0xa6/0xb0
...
Workqueue: max3100-0 max3100_work [max3100]
RIP: 0010:uart_handle_cts_change+0xa6/0xb0
...
max3100_handlerx+0xc5/0x110 [max3100]
max3100_work+0x12a/0x340 [max3100] |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: pdr: protect locator_addr with the main mutex
If the service locator server is restarted fast enough, the PDR can
rewrite locator_addr fields concurrently. Protect them by placing
modification of those fields under the main pdr->lock. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Fix sleeping in invalid context in die()
die() can be called in exception handler, and therefore cannot sleep.
However, die() takes spinlock_t which can sleep with PREEMPT_RT enabled.
That causes the following warning:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 285, name: mutex
preempt_count: 110001, expected: 0
RCU nest depth: 0, expected: 0
CPU: 0 UID: 0 PID: 285 Comm: mutex Not tainted 6.12.0-rc7-00022-ge19049cf7d56-dirty #234
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
dump_backtrace+0x1c/0x24
show_stack+0x2c/0x38
dump_stack_lvl+0x5a/0x72
dump_stack+0x14/0x1c
__might_resched+0x130/0x13a
rt_spin_lock+0x2a/0x5c
die+0x24/0x112
do_trap_insn_illegal+0xa0/0xea
_new_vmalloc_restore_context_a0+0xcc/0xd8
Oops - illegal instruction [#1]
Switch to use raw_spinlock_t, which does not sleep even with PREEMPT_RT
enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rsrc: don't lock while !TASK_RUNNING
There is a report of io_rsrc_ref_quiesce() locking a mutex while not
TASK_RUNNING, which is due to forgetting restoring the state back after
io_run_task_work_sig() and attempts to break out of the waiting loop.
do not call blocking ops when !TASK_RUNNING; state=1 set at
[<ffffffff815d2494>] prepare_to_wait+0xa4/0x380
kernel/sched/wait.c:237
WARNING: CPU: 2 PID: 397056 at kernel/sched/core.c:10099
__might_sleep+0x114/0x160 kernel/sched/core.c:10099
RIP: 0010:__might_sleep+0x114/0x160 kernel/sched/core.c:10099
Call Trace:
<TASK>
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0xb4/0x940 kernel/locking/mutex.c:752
io_rsrc_ref_quiesce+0x590/0x940 io_uring/rsrc.c:253
io_sqe_buffers_unregister+0xa2/0x340 io_uring/rsrc.c:799
__io_uring_register io_uring/register.c:424 [inline]
__do_sys_io_uring_register+0x5b9/0x2400 io_uring/register.c:613
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd8/0x270 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6f/0x77 |
| In the Linux kernel, the following vulnerability has been resolved:
sched/core: Disable page allocation in task_tick_mm_cid()
With KASAN and PREEMPT_RT enabled, calling task_work_add() in
task_tick_mm_cid() may cause the following splat.
[ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe
[ 63.696416] preempt_count: 10001, expected: 0
[ 63.696416] RCU nest depth: 1, expected: 1
This problem is caused by the following call trace.
sched_tick() [ acquire rq->__lock ]
-> task_tick_mm_cid()
-> task_work_add()
-> __kasan_record_aux_stack()
-> kasan_save_stack()
-> stack_depot_save_flags()
-> alloc_pages_mpol_noprof()
-> __alloc_pages_noprof()
-> get_page_from_freelist()
-> rmqueue()
-> rmqueue_pcplist()
-> __rmqueue_pcplist()
-> rmqueue_bulk()
-> rt_spin_lock()
The rq lock is a raw_spinlock_t. We can't sleep while holding
it. IOW, we can't call alloc_pages() in stack_depot_save_flags().
The task_tick_mm_cid() function with its task_work_add() call was
introduced by commit 223baf9d17f2 ("sched: Fix performance regression
introduced by mm_cid") in v6.4 kernel.
Fortunately, there is a kasan_record_aux_stack_noalloc() variant that
calls stack_depot_save_flags() while not allowing it to allocate
new pages. To allow task_tick_mm_cid() to use task_work without
page allocation, a new TWAF_NO_ALLOC flag is added to enable calling
kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack()
if set. The task_tick_mm_cid() function is modified to add this new flag.
The possible downside is the missing stack trace in a KASAN report due
to new page allocation required when task_work_add_noallloc() is called
which should be rare. |
| An information disclosure vulnerability leading to a potential local escalation of privilege in the procfs service (the /proc filesystem) of BlackBerry QNX Software Development Platform version(s) 6.5.0 SP1 and earlier could allow an attacker to potentially gain unauthorized access to a chosen process address space. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix uninitialized dplls mutex usage
The pf->dplls.lock mutex is initialized too late, after its first use.
Move it to the top of ice_dpll_init.
Note that the "err_exit" error path destroys the mutex. And the mutex is
the last thing destroyed in ice_dpll_deinit.
This fixes the following warning with CONFIG_DEBUG_MUTEXES:
ice 0000:10:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.36.0
ice 0000:10:00.0: 252.048 Gb/s available PCIe bandwidth (16.0 GT/s PCIe x16 link)
ice 0000:10:00.0: PTP init successful
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 0 PID: 410 at kernel/locking/mutex.c:587 __mutex_lock+0x773/0xd40
Modules linked in: crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni polyval_generic ice(+) nvme nvme_c>
CPU: 0 PID: 410 Comm: kworker/0:4 Not tainted 6.8.0-rc5+ #3
Hardware name: HPE ProLiant DL110 Gen10 Plus/ProLiant DL110 Gen10 Plus, BIOS U56 10/19/2023
Workqueue: events work_for_cpu_fn
RIP: 0010:__mutex_lock+0x773/0xd40
Code: c0 0f 84 1d f9 ff ff 44 8b 35 0d 9c 69 01 45 85 f6 0f 85 0d f9 ff ff 48 c7 c6 12 a2 a9 85 48 c7 c7 12 f1 a>
RSP: 0018:ff7eb1a3417a7ae0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
RDX: 0000000000000002 RSI: ffffffff85ac2bff RDI: 00000000ffffffff
RBP: ff7eb1a3417a7b80 R08: 0000000000000000 R09: 00000000ffffbfff
R10: ff7eb1a3417a7978 R11: ff32b80f7fd2e568 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ff32b7f02c50e0d8
FS: 0000000000000000(0000) GS:ff32b80efe800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b5852cc000 CR3: 000000003c43a004 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0x84/0x170
? __mutex_lock+0x773/0xd40
? report_bug+0x1c7/0x1d0
? prb_read_valid+0x1b/0x30
? handle_bug+0x42/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? __mutex_lock+0x773/0xd40
? rcu_is_watching+0x11/0x50
? __kmalloc_node_track_caller+0x346/0x490
? ice_dpll_lock_status_get+0x28/0x50 [ice]
? __pfx_ice_dpll_lock_status_get+0x10/0x10 [ice]
? ice_dpll_lock_status_get+0x28/0x50 [ice]
ice_dpll_lock_status_get+0x28/0x50 [ice]
dpll_device_get_one+0x14f/0x2e0
dpll_device_event_send+0x7d/0x150
dpll_device_register+0x124/0x180
ice_dpll_init_dpll+0x7b/0xd0 [ice]
ice_dpll_init+0x224/0xa40 [ice]
? _dev_info+0x70/0x90
ice_load+0x468/0x690 [ice]
ice_probe+0x75b/0xa10 [ice]
? _raw_spin_unlock_irqrestore+0x4f/0x80
? process_one_work+0x1a3/0x500
local_pci_probe+0x47/0xa0
work_for_cpu_fn+0x17/0x30
process_one_work+0x20d/0x500
worker_thread+0x1df/0x3e0
? __pfx_worker_thread+0x10/0x10
kthread+0x103/0x140
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
irq event stamp: 125197
hardirqs last enabled at (125197): [<ffffffff8416409d>] finish_task_switch.isra.0+0x12d/0x3d0
hardirqs last disabled at (125196): [<ffffffff85134044>] __schedule+0xea4/0x19f0
softirqs last enabled at (105334): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60
softirqs last disabled at (105332): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler
Inside scsi_eh_wakeup(), scsi_host_busy() is called & checked with host
lock every time for deciding if error handler kthread needs to be waken up.
This can be too heavy in case of recovery, such as:
- N hardware queues
- queue depth is M for each hardware queue
- each scsi_host_busy() iterates over (N * M) tag/requests
If recovery is triggered in case that all requests are in-flight, each
scsi_eh_wakeup() is strictly serialized, when scsi_eh_wakeup() is called
for the last in-flight request, scsi_host_busy() has been run for (N * M -
1) times, and request has been iterated for (N*M - 1) * (N * M) times.
If both N and M are big enough, hard lockup can be triggered on acquiring
host lock, and it is observed on mpi3mr(128 hw queues, queue depth 8169).
Fix the issue by calling scsi_host_busy() outside the host lock. We don't
need the host lock for getting busy count because host the lock never
covers that.
[mkp: Drop unnecessary 'busy' variables pointed out by Bart] |
