| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In libexpat before 2.8.2, there is a heap-based buffer overflow in doProlog in xmlparse.c because scaffold backing array reallocation is mishandled when there is data-structure sharing across parsers. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix adapter registration race
Adapters can be looked up based on their id using i2c_get_adapter()
which takes a reference to the embedded struct device.
Make sure that the adapter (including its struct device) has been
initialised before adding it to the IDR to avoid accessing uninitialised
data which could, for example, lead to NULL-pointer dereferences or
use-after-free.
Note that the i2c-dev chardev, which is registered from a bus notifier,
currently uses i2c_get_adapter() so the adapter needs to be added to the
IDR before registration. |
| A flaw was found in sssd. When authenticating with a YubiKey, the SSSD PAM responder can crash due to a use-after-free vulnerability, where a memory pointer is incorrectly handled. A local attacker could exploit this flaw by manipulating smartcard or YubiKey contents, leading to a denial of service that disrupts authentication. This vulnerability also presents a potential for privilege escalation, although it is difficult to exploit. |
| The Xtensa MMU userspace port never initialized the per-thread page-table pointer thread->arch.ptables during thread setup, while arch_mem_domain_thread_add() in arch/xtensa/core/ptables.c uses a non-NULL value of that field as its "this thread is migrating from another memory domain" predicate. For a thread whose struct k_thread backing memory is not zeroed, the field holds stale data and the kernel takes the migration branch, passing that stale value to reset_region() as the base of a level-1 page table. The equivalent field on x86 is explicitly cleared in z_x86_userspace_prepare_thread() for exactly this reason; the Xtensa port adopted the predicate without the initialization.
The condition is reachable from an unprivileged user-mode thread on a build with CONFIG_XTENSA_MMU, CONFIG_USERSPACE and dynamically allocated kernel objects. k_object_alloc(K_OBJ_THREAD) is a system call and allocates the thread object from the caller's resource pool without zeroing it, and the k_thread_create() verifier accepts such an object while forcing the K_USER option, so the migration branch is taken whenever the recycled heap bytes at that offset are non-zero. Because a user thread can also allocate, fill and free other kernel objects from the same heap, the stale bytes are groomable rather than merely random.
Walking the bogus table in region_map_update() performs an unguarded index into l2_page_tables_counter[], may copy from and write through the attacker-influenceable level-1 base in dup_l2_table_if_needed(), and finally writes a page-table entry through a second pointer read out of that memory — once per page of the new thread's stack. The result is out-of-bounds reads and writes executed in supervisor mode, ranging from an immediate kernel panic (observed as Xtensa EXCAUSE 13 on Intel ADSP DSP firmware with user threads) to corruption of kernel memory and escape from the user-mode sandbox. |
| ModSecurity is an open source, cross platform web application firewall (WAF) engine for Apache, IIS and Nginx. From 3.0.15 until 3.0.17, XML request body processing with SecParseXmlIntoArgs set to On or OnlyArgs can leave XMLNodes::parsing_ctx_arg uninitialized in the SAX end-element callback. A single crafted unauthenticated HTTP request can make a worker dereference the pointer, resulting in a constant-value write to an attacker-controlled address. The resulting memory corruption can terminate the worker and may disclose memory or redirect execution. Earlier 3.0.x releases and ModSecurity 2.x do not use the affected path. This issue is fixed in version 3.0.17. |
| IRISPowerscan insufficiently restrict the use of
untrusted scripts. An authenticated user with access to script functionality
can import or modify scripts that are executed by the application, potentially
resulting in arbitrary code execution in the security context of the Windows
user running IRISPowerscan. |
| The RTIO submission-queue verifier rtio_vrfy_sqe() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) accumulated the results of K_SYSCALL_MEMORY() into its valid_sqe flag with &=. That macro returns nonzero on failure (it is built on K_SYSCALL_VERIFY_MSG(), which yields !(expr)), so every buffer permission check contributed the opposite of its result. A submission whose tx.buf, rx.buf or txrx.tx_buf/txrx.rx_buf pointer was not accessible to the calling thread was accepted, while a legitimate, thread-owned buffer caused the calling thread to be killed with a kernel oops.
The verifier runs on behalf of the rtio_sqe_copy_in_get_handles() system call (also reached through the inline rtio_sqe_copy_in() wrapper), so it is driven directly by untrusted user-mode input on any image built with CONFIG_USERSPACE. A user thread that has been granted an RTIO context and an rtio_iodev object — the intended usage of RTIO userspace support, established via rtio_access_grant() — can submit an SQE whose buffer pointer and length name arbitrary kernel memory; the object check on sqe->iodev is unaffected and still passes, and the crafted SQE is forwarded to the bus driver unchanged.
Downstream consumers dereference the pointer with supervisor privilege. The generic I2C and I3C RTIO fallback handlers (drivers/i2c/i2c_rtio_default.c, drivers/i3c/i3c_rtio_default.c) copy sqe.rx.buf/sqe.tx.buf into struct i2c_msg and call i2c_transfer(), and the vendor SPI/I2C RTIO drivers behave equivalently. An RTIO_OP_RX submission therefore has peripheral data written into kernel memory of the attacker's choosing (arbitrary kernel write), an RTIO_OP_TX submission clocks kernel memory out over the bus (kernel memory disclosure), and a pointer to unmapped memory faults the kernel. This is a full escape from the user-mode isolation boundary that CONFIG_USERSPACE exists to enforce.
The defect was masked for years because the in-tree user-mode RTIO tests only exercise RTIO_OP_NOP and mempool-backed reads, neither of which reaches the affected checks. The fix negates each K_SYSCALL_MEMORY() result and additionally validates the TXRX transmit buffer read-only, matching the SPI, I2C and I3C handlers. |
| Two RTIO syscall verifiers, in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0), did not validate user-supplied pointers before the kernel wrote through them.
z_vrfy_rtio_sqe_cancel() performed no validation at all. It passed the caller's struct rtio_sqe pointer straight to z_impl_rtio_sqe_cancel(), which converts it with CONTAINER_OF to a struct rtio_iodev_sqe, ORs RTIO_SQE_CANCELED (BIT(3)) into its 16-bit flags field in supervisor mode, then loads its next pointer and repeats until that pointer is NULL. The syscall takes no RTIO context argument, so it needs no object grant: any user-mode thread on a CONFIG_USERSPACE build can set that bit in a 16-bit word at an address of its choosing in kernel memory, and the kernel continues the write along whatever pointer chain it finds at the corresponding offset. Setting chosen bits in kernel data structures, such as object permission or thread state fields, can be used to escalate privilege from user mode.
z_vrfy_rtio_sqe_copy_in_get_handles() validated its RTIO context and the input SQE array, but only NULL-checked the handle out-parameter before writing a kernel SQE pointer through it, with no K_SYSCALL_MEMORY_WRITE check. A user thread that holds a granted RTIO context can therefore make the kernel store a pointer value at an arbitrary address.
The fixes validate the handle out-parameter as writable, bound the cancel handle to real submission-pool storage, and require permission on the RTIO context that owns the matching pool. Without that last check a bounded handle still let any user thread cancel submissions belonging to other contexts, silently aborting their I/O. Systems built without CONFIG_USERSPACE or without CONFIG_RTIO are unaffected. |
| Improper handling of a failed memory remap in Firecracker versions 0.23.0 through 1.16.1 might allow a guest user with root privileges to read or modify Firecracker VMM process memory via balloon or virtio-mem discard requests on microVMs restored from a snapshot with the File memory backend, if the host fails to create the replacement mapping.
To remediate this issue, users should upgrade to Firecracker 1.16.2 or 1.17.0 and later. |
| A flaw was found in operator-foundry. GitHub Actions and reusable workflows within the component are referenced using mutable tags (e.g., `@v0`, `@v4`) instead of fixed commit SHAs. This allows an attacker to potentially alter the code executed in the Continuous Integration (CI) pipeline through an upstream compromise or by re-pointing a tag, leading to unauthorized code execution or manipulation. |
| A flaw was found in operator-sdk-builder. The software uses a flexible label, called a mutable tag, to identify its base container image instead of a unique, fixed identifier. This practice allows the underlying base image to change unexpectedly between builds. Such a change could introduce vulnerabilities or malicious code into the build process, posing a supply chain integrity risk. |
| A flaw was found in konflux-operator-tasks. GitHub Actions within this component are configured to use mutable tags or branches instead of specific, immutable commit SHAs. This vulnerability could allow a remote attacker to introduce malicious code into the build process if they compromise the referenced mutable tag or branch. Such a compromise could lead to unauthorized code execution or integrity issues within the affected system. |
| Black is the uncompromising Python code formatter. Prior to 26.10.1, the Black GitHub Action with use_pyproject: true accepts tool.black.required-version from pyproject.toml without validating that it is a released Black version specifier. An attacker who can submit a pull request can change that field to a direct reference to attacker-controlled code, causing the workflow to install and execute the code in the victim repository's GitHub Actions context. This issue is fixed in version 26.10.1. |
| Mistral Vibe before 3.0.3 contains a remote code execution vulnerability that allows attackers to run commands by abusing repository-configured gpg.program during project context collection. A crafted repository setting gpg.program and log.showSignature with a signed commit makes git log execute the attacker's program at session start, before any trust prompt. |
| Mistral Vibe before 2.25.7 contains a remote code execution vulnerability that allows attackers to run commands by configuring malicious Git clean or process filter drivers in a repository. When a user opens a crafted repository, ProjectContextProvider._fetch_git_status runs git status at startup, invoking the filters and executing commands with user privileges before any trust prompt. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: Fix UAF when reading statistics data
The network statistic data in the driver is protected by RCU.
Unfortunately when tearing down the queues after an error during
connecting to the frontend (e.g. due to illegal Xenstore data filled
in by the guest), the statistic data is being freed without
synchronizing the RCU state. In case the data is being read via sysfs
in this phase, access to already freed memory or memory being in new
use is possible.
Fix that by calling synchronize_net() before freeing the queue data.
This is XSA-526 / CVE-2026-100080 |
| In JetBrains PyCharm before 2026.3 code execution was possible in Safe Mode via a crafted Jupyter notebook widget module |
| In JetBrains WebStorm before 2026.3,
2026.2.3 code execution via Grunt and Gulp task loading was possible in untrusted projects |
| A bug in QEMU could cause a guest I/O operation otherwise addressed to an arbitrary disk offset to be targeted to offset 0 instead (potentially overwriting the VM's boot code). This could be used, for example, by L2 guests with a virtual disk (vdiskL2) stored on a virtual disk of an L1 (vdiskL1) hypervisor to read and/or write data to LBA 0 of vdiskL1, potentially gaining control of L1 at its next reboot. |
| In JetBrains IntelliJ IDEA before 2026.3,
2026.2.2 code execution was possible in Safe Mode via project-controlled JVM options of the build process |
