| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In decrypt of CryptoHalHidl.cpp, there is a possible use-after-free due to a race condition. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: defer xenvif_mcast_addr_list_free()
In order for the function to legitimately avoid locking/RCU, it needs to
run after all TX/RX processing has finished/stopped: Lookups happen from
xenvif_start_xmit(), while adds/removes happen from xenvif_tx_action()
(called out of xenvif_poll()).
Move the call out of xenvif_disconnect_data() (the call to the function
from connect()'s error path doesn't require any cleaning up there), and
put it past the synchronization point in backend_disconnect().
This is XSA-527 / CVE-2026-100081. |
| Time-of-check time-of-use race condition for the Intel(R) VTune(TM) Profiler software before version 2026.0.0 within Ring 1: Device Drivers may allow an escalation of privilege. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Time-of-check time-of-use race condition for the Intel(R) VTune(TM) Profiler software within Ring 1: Device Drivers may allow an escalation of privilege. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix adapter registration race
Adapters can be looked up based on their id using i2c_get_adapter()
which takes a reference to the embedded struct device.
Make sure that the adapter (including its struct device) has been
initialised before adding it to the IDR to avoid accessing uninitialised
data which could, for example, lead to NULL-pointer dereferences or
use-after-free.
Note that the i2c-dev chardev, which is registered from a bus notifier,
currently uses i2c_get_adapter() so the adapter needs to be added to the
IDR before registration. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix 'scheduling while atomic' in mptcp_pm_nl_append_new_local_addr
If multiple connection requests attempt to create an implicit mptcp
endpoint in parallel, more than one caller may end up in
mptcp_pm_nl_append_new_local_addr because none found the address in
local_addr_list during their call to mptcp_pm_nl_get_local_id. In this
case, the concurrent new_local_addr calls may delete the address entry
created by the previous caller. These deletes use synchronize_rcu, but
this is not permitted in some of the contexts where this function may be
called. During packet recv, the caller may be in a rcu read critical
section and have preemption disabled.
An example stack:
BUG: scheduling while atomic: swapper/2/0/0x00000302
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1))
dump_stack (lib/dump_stack.c:124)
__schedule_bug (kernel/sched/core.c:5943)
schedule_debug.constprop.0 (arch/x86/include/asm/preempt.h:33 kernel/sched/core.c:5970)
__schedule (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:207 kernel/sched/features.h:29 kernel/sched/core.c:6621)
schedule (arch/x86/include/asm/preempt.h:84 kernel/sched/core.c:6804 kernel/sched/core.c:6818)
schedule_timeout (kernel/time/timer.c:2160)
wait_for_completion (kernel/sched/completion.c:96 kernel/sched/completion.c:116 kernel/sched/completion.c:127 kernel/sched/completion.c:148)
__wait_rcu_gp (include/linux/rcupdate.h:311 kernel/rcu/update.c:444)
synchronize_rcu (kernel/rcu/tree.c:3609)
mptcp_pm_nl_append_new_local_addr (net/mptcp/pm_netlink.c:966 net/mptcp/pm_netlink.c:1061)
mptcp_pm_nl_get_local_id (net/mptcp/pm_netlink.c:1164)
mptcp_pm_get_local_id (net/mptcp/pm.c:420)
subflow_check_req (net/mptcp/subflow.c:98 net/mptcp/subflow.c:213)
subflow_v4_route_req (net/mptcp/subflow.c:305)
tcp_conn_request (net/ipv4/tcp_input.c:7216)
subflow_v4_conn_request (net/mptcp/subflow.c:651)
tcp_rcv_state_process (net/ipv4/tcp_input.c:6709)
tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1934)
tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2334)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1))
ip_local_deliver_finish (include/linux/rcupdate.h:813 net/ipv4/ip_input.c:234)
ip_local_deliver (include/linux/netfilter.h:314 include/linux/netfilter.h:308 net/ipv4/ip_input.c:254)
ip_sublist_rcv_finish (include/net/dst.h:461 net/ipv4/ip_input.c:580)
ip_sublist_rcv (net/ipv4/ip_input.c:640)
ip_list_rcv (net/ipv4/ip_input.c:675)
__netif_receive_skb_list_core (net/core/dev.c:5583 net/core/dev.c:5631)
netif_receive_skb_list_internal (net/core/dev.c:5685 net/core/dev.c:5774)
napi_complete_done (include/linux/list.h:37 include/net/gro.h:449 include/net/gro.h:444 net/core/dev.c:6114)
igb_poll (drivers/net/ethernet/intel/igb/igb_main.c:8244) igb
__napi_poll (net/core/dev.c:6582)
net_rx_action (net/core/dev.c:6653 net/core/dev.c:6787)
handle_softirqs (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:588 kernel/softirq.c:427 kernel/softirq.c:636)
irq_exit_rcu (kernel/softirq.c:651)
common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14))
</IRQ>
This problem seems particularly prevalent if the user advertises an
endpoint that has a different external vs internal address. In the case
where the external address is advertised and multiple connections
already exist, multiple subflow SYNs arrive in parallel which tends to
trigger the race during creation of the first local_addr_list entries
which have the internal address instead.
Fix by skipping the replacement of an existing implicit local address if
called via mptcp_pm_nl_get_local_id. |
| The GemBooking WordPress plugin before 1.7.1 does not serialise concurrent booking requests per team member, allowing unauthenticated users to create overlapping confirmed bookings for the same team member across different bookable items by sending simultaneous requests. |
| A flaw was found in the authentication session handling of the keycloak-services component in Keycloak. The issue occurs because the system fails to verify if an authenticator is valid for the current authentication flow when switching between the standard authentication path and the reset credentials path. An authenticated attacker can exploit this by triggering a race condition during the credential reset process to associate their successful authentication state with another user's session. This can result in the attacker gaining full access to the victim's account and changing their password. |
| SAP NetWeaver Application Server for ABAP does not properly validate certain input values. An authenticated user could send specially crafted requests to trigger an error in internal processing. This could crash the affected work process and make the system unavailable. This results in a high impact on availability with no impact on confidentiality and integrity. |
| Group-Office before 6.8.181, 25.0.116, and 26.0.58 contains an arbitrary local file read vulnerability in FolderController::actionProcessUploadQueue that allows authenticated users to read server files by supplying absolute paths in the blobs parameter. Attackers can have files hard-linked or copied into their own folder and downloaded, exposing other users' stored files and config.php database credentials. |
| FFmpeg through 9.0.2 contains a division by zero vulnerability in ff_aom_parse_film_grain_sets() that fails to reject AFGS1 scaling points with repeated x values. Attackers can supply crafted HEVC or VVC files with zero-increment scaling points in T.35 SEI messages, causing generate_scaling() to divide by zero and crash the decoder. |
| FFmpeg through 9.0.2 contains a division by zero vulnerability in estimate_motion_b() in libavcodec/motion_est.c, caused by frame timestamp distances truncated to 16 bits. Attackers can supply input with timestamp gaps that are multiples of 65536, crashing MPEG-4 Part 2 or MPEG-1/2 B-frame encoding with SIGFPE. |
| FFmpeg through 9.0.2 contains a division by zero vulnerability in the VVC decoder because ff_vvc_slice_rpl() fails to validate num_ref_idx_active against built reference list entries. Attackers can supply a crafted VVC bitstream whose excess reference indices yield a zero POC difference in ff_vvc_mv_scale(), crashing the decoding process. |
| FFmpeg through 9.0.2 contains a division by zero vulnerability in dovi_configure_ext() in libavcodec/dovi_rpuenc.c that allows attackers to crash the process via an unvalidated frame rate denominator. Attackers can supply a crafted HEVC or AV1 input with a nonzero frame rate numerator and zero denominator to the dovi_rpu bitstream filter or libx265, libaom, or libsvtav1 encoders, causing denial of service. |
| The user-mode verification handler for the i3c_transfer() system call, z_vrfy_i3c_transfer() in drivers/i3c/i3c_handlers.c, validated the caller-supplied struct i3c_device_desc in place instead of snapshotting it. It confirmed only that the descriptor was readable by the calling thread (K_SYSCALL_MEMORY_READ()), read target->bus once to check it with K_SYSCALL_OBJ(), and then passed the caller's live pointer down. The implementation z_impl_i3c_transfer() re-reads target->bus from that user memory and dispatches through it as DEVICE_API_GET(i3c, target->bus)->i3c_xfers(...), so the bus that was validated is not necessarily the bus that is used. DEVICE_API_GET() performs no runtime type check outside CONFIG_DEVICE_API_ASSERT builds.
On a build with CONFIG_USERSPACE and an I3C controller driver, a user thread that has been granted an I3C device object can exploit this with a second thread in the same memory domain: one thread calls i3c_transfer() while the other rewrites the bus field of the descriptor. The window between the check and the use spans the num_msgs validation, the message-array access check, a stack VLA allocation and a memcpy() of up to 32 struct i3c_msg, so the race is repeatable and can simply be retried until it lands.
When the substitution succeeds, the kernel dereferences an attacker-chosen pointer as a struct device, loads a function pointer from the attacker-controlled api table and calls it in supervisor mode with attacker-influenced arguments. This yields kernel-mode code execution from an unprivileged user thread — a complete escape of the userspace memory-protection sandbox; lesser outcomes are an arbitrary two-level kernel read or a kernel fault. Builds without CONFIG_USERSPACE, or without an I3C driver, are unaffected.
The fix copies the descriptor into a kernel-stack local with k_usermode_from_copy(), validates the bus in that copy, and dispatches on the copy, so the validated value is provably the value used. |
| A race condition vulnerability exists in the API of HPE Networking Fabric Composer. Successful exploitation could allow an authenticated attacker with low privileges to corrupt the configuration state of the affected system. |
| In handle_app_val_response of btif_rc.cc, there is a possible way to achieve code execution due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| FastNetMon is a high-performance DDoS detector and sensor. In version 1.2.9 and earlier, FastNetMon's IPv6 top-talkers screen-draw thread in draw_table_ipv6() in src/fastnetmon_logic.cpp iterates ipv6_host_counters.average_speed_map without holding counter_map_mutex while recalculate_speed() inserts new keys and may rehash the same map. The race requires networks_list to include the targeted IPv6 range. It causes confirmed undefined behavior under load; a process crash is plausible but was not observed, so reliable denial of service has not been established. No fixed release is available as of this review. |
| filelock is a platform-independent file lock for Python. From 3.30.0 until 4.2.1, On POSIX platforms, StrictSoftFileLock and AsyncStrictSoftFileLock validate the coordination directory in _ensure_protocol_directory but later reach the claims directory through _open_directory by pathname, allowing a local account that can rename the coordination name to swap in a symbolic link between check and use during acquisition. That race can create and leave claim files in another writable directory or strand claims in a different strict lock so the second lock times out. Separately, the claims property and force_break follow a resting symbolic link without a race when the lock user inspects or recovers the lock. Claims inspection discloses a file name to the other account only if the resulting exception text or claim_name reaches that account through a shared log, CI output, or error report. A blind force_break recovery that removes live claims from another strict lock can allow two processes into that lock's critical section; this path reaches other strict locks, not arbitrary files. This issue is fixed in version 4.2.1. |
| VoiceSentinel is a real-time voice moderation system for Minecraft servers. From 2.2.1 until 3.3.1, the optional report buffer feature has a race between retention cleanup and normal transcript writes. In `report_buffer.py`, `_maybe_cleanup()` uses an unlocked dictionary for once-per-hour cleanup throttling, allowing simultaneous `_cleanup_tenant()` operations for one tenant. Cleanup reads `transcripts.jsonl` and rewrites it in place without file locking or atomic replacement, while `report_buffer_append_async` uses `asyncio.to_thread` to append without synchronization. In `main.py`, concurrent `_processing_worker` tasks make this reachable in normal operation; `processing.worker_count` of two or more and public-pool servers sharing a `server_key` increase collisions. With `report_buffer.enabled` set to true, racing writes can lose, duplicate or corrupt transcript data and defeat `report_buffer.retention_seconds` pruning, allowing unbounded disk growth that can exhaust storage and crash the host or other services sharing it. The feature is opt-in and disabled by default. This issue is fixed in version 3.3.1. |
