| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix race condition in TX timestamp ring cleanup
Fix a race condition between ice_free_tx_tstamp_ring() and ice_tx_map()
that can cause a NULL pointer dereference.
ice_free_tx_tstamp_ring currently clears the ICE_TX_FLAGS_TXTIME flag
after NULLing the tstamp_ring. This could allow a concurrent ice_tx_map
call on another CPU to dereference the tstamp_ring, which could lead to
a NULL pointer dereference.
CPU A:ice_free_tx_tstamp_ring() | CPU B:ice_tx_map()
--------------------------------|---------------------------------
tx_ring->tstamp_ring = NULL |
| ice_is_txtime_cfg() -> true
| tstamp_ring = tx_ring->tstamp_ring
| tstamp_ring->count // NULL deref!
flags &= ~ICE_TX_FLAGS_TXTIME |
Fix by:
1. Reordering ice_free_tx_tstamp_ring() to clear the flag before
NULLing the pointer, with smp_wmb() to ensure proper ordering.
2. Adding smp_rmb() in ice_tx_map() after the flag check to order the
flag read before the pointer read, using READ_ONCE() for the
pointer, and adding a NULL check as a safety net.
3. Converting tx_ring->flags from u8 to DECLARE_BITMAP() and using
atomic bitops (set_bit(), clear_bit(), test_bit()) for all flag
operations throughout the driver:
- ICE_TX_RING_FLAGS_XDP
- ICE_TX_RING_FLAGS_VLAN_L2TAG1
- ICE_TX_RING_FLAGS_VLAN_L2TAG2
- ICE_TX_RING_FLAGS_TXTIME |
| In the Linux kernel, the following vulnerability has been resolved:
pseries/papr-hvpipe: Fix race with interrupt handler
While executing ->ioctl handler or ->release handler, if an interrupt
fires on the same cpu, then we can enter into a deadlock.
This patch fixes both these handlers to take spin_lock_irq{save|restore}
versions of the lock to prevent this deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix deferred split queue races during migration
migrate_folio_move() records the deferred split queue state from src and
replays it on dst. Replaying it after remove_migration_ptes(src, dst, 0)
makes dst visible before it is requeued, so a concurrent rmap-removal path
can mark dst partially mapped and trip the WARN in deferred_split_folio().
Move the requeue before remove_migration_ptes() so dst is back on the
deferred split queue before it becomes visible again.
Because migration still holds dst locked at that point, teach
deferred_split_scan() to requeue a folio when folio_trylock() fails.
Otherwise a fully mapped underused folio can be dequeued by the shrinker
and silently lost from split_queue.
[ziy@nvidia.com: move the comment] |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: search every core slot when looking up a scheduler
sched_to_core() walks rdev->cores[] up to rdev->num_cores, and
rocket_remove() decrements num_cores for every core it removes. Unbind a
core that is not the last one and the cores behind it fall outside the
search, so sched_to_core() returns NULL for a core that is still bound and
still running jobs. Neither caller checks the result:
rocket_job_run(): rocket_fence_create(core), core->dev
rocket_job_timedout(): dev_err(core->dev, "NPU job timed out")
Unbinding the middle core of the three on an RK3588 while three clients are
submitting to all of them faults twice, once from the surviving core's
job queue and once from its reset work:
KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227]
Workqueue: fdad0000.npu drm_sched_run_job_work [gpu_sched]
pc : rocket_job_run+0x234/0x838 [rocket]
Call trace:
rocket_job_run+0x234/0x838 [rocket]
drm_sched_run_job_work+0x2cc/0xad8 [gpu_sched]
process_one_work+0x640/0x14f0
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: rocket-reset-2 drm_sched_job_timedout [gpu_sched]
pc : rocket_job_timedout+0xf0/0x1e0 [rocket]
Call trace:
rocket_job_timedout+0xf0/0x1e0 [rocket]
drm_sched_job_timedout+0x188/0x6a0 [gpu_sched]
Both are the third core: the workqueue names are its device and its
core->index, and it was left at slot 2 while num_cores had dropped to 2.
Search all the slots that were allocated, the way find_core_for_dev() now
does. A core that is still bound is then found, and the two callers get
the pointer they already assume they have.
This does not make unbinding one core out of several safe. An open client
keeps an entity pointing at the scheduler of the core that went away:
drm_sched reports it as not ready for every job that lands on it, and the
client waits in dma_fence_default_wait for a fence that will never signal.
Stopping the NULL dereference is what belongs in a fix; the rest wants
more thought. |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: core - use RCU and work_struct to fix race condition
Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread
exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex
lock, a concurrent hwrng_unregister() may call kthread_stop() again on
the same task.
Additionally, if hwrng_unregister() is called immediately after
hwrng_register(), the stopped thread may have never been executed. Thus,
hwrng_fill remains dirty even after hwrng_unregister() returns. In this
case, subsequent calls to hwrng_register() will fail to start new
threads, and hwrng_unregister() will call kthread_stop() on the same
freed task. In both cases, a use-after-free occurs:
refcount_t: addition on 0; use-after-free.
WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0
Call Trace:
kthread_stop+0x181/0x360
hwrng_unregister+0x288/0x380
virtrng_remove+0xe3/0x200
This patch fixes the race by protecting the global hwrng_fill pointer
inside the rng_mutex lock, so that hwrng_fillfn() thread is stopped only
once, and calls to kthread_run() and kthread_stop() are serialized
with the lock held.
To avoid deadlock in hwrng_fillfn() while being stopped with the lock
held, we convert current_rng to RCU, so that get_current_rng() can read
current_rng without holding the lock. To remove the lock from put_rng(),
we also delay the actual cleanup into a work_struct.
Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR()
checks are removed from its callers.
With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can no
longer clear hwrng_fill itself. Therefore, if hwrng_fillfn() returns
directly after current_rng is dropped, kthread_stop() would be called on
a freed task_struct later. To fix this, hwrng_fillfn() calls schedule()
now to keep the task alive until being stopped. The kthread_stop() call
is also moved from hwrng_unregister() to drop_current_rng(), ensuring
kthread_stop() is called on all possible paths where current_rng becomes
NULL, so that the thread would not wait forever. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: fix ip_rt_bug race in icmp_route_lookup reverse path
icmp_route_lookup() performs multiple route lookups to find a suitable
route for sending ICMP error messages, with special handling for XFRM
(IPsec) policies.
The lookup sequence is:
1. First, lookup output route for ICMP reply (dst = original src)
2. Pass through xfrm_lookup() for policy check
3. If blocked (-EPERM) or dst is not local, enter "reverse path"
4. In reverse path, call xfrm_decode_session_reverse() to get fl4_dec
which reverses the original packet's flow (saddr<->daddr swapped)
5. If fl4_dec.saddr is local (we are the original destination), use
__ip_route_output_key() for output route lookup
6. If fl4_dec.saddr is NOT local (we are a forwarding node), use
ip_route_input() to simulate the reverse packet's input path
7. Finally, pass rt2 through xfrm_lookup() with XFRM_LOOKUP_ICMP flag
The bug occurs in step 6: ip_route_input() is called with fl4_dec.daddr
(original packet's source) as destination. If this address becomes local
between the initial check and ip_route_input() call (e.g., due to
concurrent "ip addr add"), ip_route_input() returns a LOCAL route with
dst.output set to ip_rt_bug.
This route is then used for ICMP output, causing dst_output() to call
ip_rt_bug(), triggering a WARN_ON:
------------[ cut here ]------------
WARNING: net/ipv4/route.c:1275 at ip_rt_bug+0x21/0x30, CPU#1
Call Trace:
<TASK>
ip_push_pending_frames+0x202/0x240
icmp_push_reply+0x30d/0x430
__icmp_send+0x1149/0x24f0
ip_options_compile+0xa2/0xd0
ip_rcv_finish_core+0x829/0x1950
ip_rcv+0x2d7/0x420
__netif_receive_skb_one_core+0x185/0x1f0
netif_receive_skb+0x90/0x450
tun_get_user+0x3413/0x3fb0
tun_chr_write_iter+0xe4/0x220
...
Fix this by checking rt2->rt_type after ip_route_input(). If it's
RTN_LOCAL, the route cannot be used for output, so treat it as an error.
The reproducer requires kernel modification to widen the race window,
making it unsuitable as a selftest. It is available at:
https://gist.github.com/mrpre/eae853b72ac6a750f5d45d64ddac1e81 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: Fix race bug in nvme_poll_irqdisable()
In the following scenario, pdev can be disabled between (1) and (3) by
(2). This sets pdev->msix_enabled = 0. Then, pci_irq_vector() will
return MSI-X IRQ(>15) for (1) whereas return INTx IRQ(<=15) for (2).
This causes IRQ warning because it tries to enable INTx IRQ that has
never been disabled before.
To fix this, save IRQ number into a local variable and ensure
disable_irq() and enable_irq() operate on the same IRQ number. Even if
pci_free_irq_vectors() frees the IRQ concurrently, disable_irq() and
enable_irq() on a stale IRQ number is still valid and safe, and the
depth accounting reamins balanced.
task 1:
nvme_poll_irqdisable()
disable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(1)
enable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(3)
task 2:
nvme_reset_work()
nvme_dev_disable()
pdev->msix_enable = 0; ...(2)
crash log:
------------[ cut here ]------------
Unbalanced enable for IRQ 10
WARNING: kernel/irq/manage.c:753 at __enable_irq+0x102/0x190 kernel/irq/manage.c:753, CPU#1: kworker/1:0H/26
Modules linked in:
CPU: 1 UID: 0 PID: 26 Comm: kworker/1:0H Not tainted 6.19.0-dirty #9 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: kblockd blk_mq_timeout_work
RIP: 0010:__enable_irq+0x107/0x190 kernel/irq/manage.c:753
Code: ff df 48 89 fa 48 c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 79 48 8d 3d 2e 7a 3f 05 41 8b 74 24 2c <67> 48 0f b9 3a e8 ef b9 21 00 5b 41 5c 5d e9 46 54 66 03 e8 e1 b9
RSP: 0018:ffffc900001bf550 EFLAGS: 00010046
RAX: 0000000000000007 RBX: 0000000000000000 RCX: ffffffffb20c0e90
RDX: 0000000000000000 RSI: 000000000000000a RDI: ffffffffb74b88f0
RBP: ffffc900001bf560 R08: ffff88800197cf00 R09: 0000000000000001
R10: 0000000000000003 R11: 0000000000000003 R12: ffff8880012a6000
R13: 1ffff92000037eae R14: 000000000000000a R15: 0000000000000293
FS: 0000000000000000(0000) GS:ffff8880b49f7000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555da4a25fa8 CR3: 00000000208e8000 CR4: 00000000000006f0
Call Trace:
<TASK>
enable_irq+0x121/0x1e0 kernel/irq/manage.c:797
nvme_poll_irqdisable+0x162/0x1c0 drivers/nvme/host/pci.c:1494
nvme_timeout+0x965/0x14b0 drivers/nvme/host/pci.c:1744
blk_mq_rq_timed_out block/blk-mq.c:1653 [inline]
blk_mq_handle_expired+0x227/0x2d0 block/blk-mq.c:1721
bt_iter+0x2fc/0x3a0 block/blk-mq-tag.c:292
__sbitmap_for_each_set include/linux/sbitmap.h:269 [inline]
sbitmap_for_each_set include/linux/sbitmap.h:290 [inline]
bt_for_each block/blk-mq-tag.c:324 [inline]
blk_mq_queue_tag_busy_iter+0x969/0x1e80 block/blk-mq-tag.c:536
blk_mq_timeout_work+0x627/0x870 block/blk-mq.c:1763
process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257
process_scheduled_works kernel/workqueue.c:3340 [inline]
worker_thread+0x65c/0xe60 kernel/workqueue.c:3421
kthread+0x41a/0x930 kernel/kthread.c:463
ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
</TASK>
irq event stamp: 74478
hardirqs last enabled at (74477): [<ffffffffb5720a9c>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:159 [inline]
hardirqs last enabled at (74477): [<ffffffffb5720a9c>] _raw_spin_unlock_irq+0x2c/0x60 kernel/locking/spinlock.c:202
hardirqs last disabled at (74478): [<ffffffffb57207b5>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
hardirqs last disabled at (74478): [<ffffffffb57207b5>] _raw_spin_lock_irqsave+0x85/0xa0 kernel/locking/spinlock.c:162
softirqs last enabled at (74304): [<ffffffffb1e9466c>] __do_softirq kernel/softirq.c:656 [inline]
softirqs last enabled at (74304): [<ffffffffb1e9466c>] invoke_softirq kernel/softirq.c:496 [inline]
softirqs last enabled at (74304): [<ffffffffb1e9466c>] __irq_exit_rcu+0xdc/0x120
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: fix race between task migration and iteration
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here. |
| In the Linux kernel, the following vulnerability has been resolved:
md/bitmap: fix GPF in write_page caused by resize race
A General Protection Fault occurs in write_page() during array resize:
RIP: 0010:write_page+0x22b/0x3c0 [md_mod]
This is a use-after-free race between bitmap_daemon_work() and
__bitmap_resize(). The daemon iterates over `bitmap->storage.filemap`
without locking, while the resize path frees that storage via
md_bitmap_file_unmap(). `quiesce()` does not stop the md thread,
allowing concurrent access to freed pages.
Fix by holding `mddev->bitmap_info.mutex` during the bitmap update. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: annotate data-races around hdev->req_status
__hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock:
hdev->req_status = HCI_REQ_PEND;
However, several other functions read or write hdev->req_status without
holding any lock:
- hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue)
- hci_cmd_sync_complete() reads/writes from HCI event completion
- hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write
- hci_abort_conn() reads in connection abort path
Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while
hci_send_cmd_sync() runs on hdev->workqueue, these are different
workqueues that can execute concurrently on different CPUs. The plain
C accesses constitute a data race.
Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses
to hdev->req_status to prevent potential compiler optimizations that
could affect correctness (e.g., load fusing in the wait_event
condition or store reordering). |
| The YITH WooCommerce Gift Cards WordPress plugin before 4.38.1 does not lock or atomically update a gift card's balance when it is redeemed at checkout, allowing an attacker who holds a gift card code to spend more than its funded value by submitting multiple checkouts for the same code at the same time. |
| A race condition was addressed with additional validation. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. A malicious app may be able to break out of its sandbox. |
| A race condition was addressed with improved handling of symbolic links. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to modify protected parts of the file system. |
| The Model Context Protocol TypeScript SDK provides TypeScript client and server implementations of the Model Context Protocol. From 2.0.0 until 2.3.0 in @modelcontextprotocol/server, applications that shared one stateless HTTP transport or one McpServer or Server instance among multiple clients could deliver responses and notifications to the wrong client. The affected surface is an MCP server reached over HTTP by multiple clients. The trigger is reuse of one stateless transport or server instance. Messages were associated with a connection using only the JSON-RPC request identifier. SDK clients start request identifiers at zero, so collisions occur in normal operation. Cross-client delivery exposes one client's responses and notifications to another client. The issue requires an HTTP endpoint reachable by more than one client and an application that constructs the server or transport once at startup instead of once per request or session. stdio servers and factory-created per-call servers are not affected. Upgrading causes reused instances to fail and therefore requires an application code change. This issue is fixed in @modelcontextprotocol/server 2.3.0. |
| In Jenkins 2.587 and earlier, LTS 2.580.1 and earlier, the HTTP endpoint for creating the first user account does not check whether the setup wizard has been completed, resulting in a race condition that allows unauthenticated attackers to create an administrator account while the initial user account is being replaced. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: designware: amdisp: Fix resume-probe race condition issue
Identified resume-probe race condition in kernel v7.0 with the commit
38fa29b01a6a ("i2c: designware: Combine the init functions"),but this
issue existed from the beginning though not detected.
The amdisp i2c device requires ISP to be in power-on state for probe
to succeed. To meet this requirement, this device is added to genpd
to control ISP power using runtime PM. The pm_runtime_get_sync() called
before i2c_dw_probe() triggers PM resume, which powers on ISP and also
invokes the amdisp i2c runtime resume before the probe completes resulting
in this race condition and a NULL dereferencing issue in v7.0
Fix this race condition by using the genpd APIs directly during probe:
- Call dev_pm_genpd_resume() to Power ON ISP before probe
- Call dev_pm_genpd_suspend() to Power OFF ISP after probe
- Set the device to suspended state with pm_runtime_set_suspended()
- Enable runtime PM only after the device is fully initialized |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: fix folio isn't locked in softleaf_to_folio()
On arm64 server, we found folio that get from migration entry isn't locked
in softleaf_to_folio(). This issue triggers when mTHP splitting and
zap_nonpresent_ptes() races, and the root cause is lack of memory barrier
in softleaf_to_folio(). The race is as follows:
CPU0 CPU1
deferred_split_scan() zap_nonpresent_ptes()
lock folio
split_folio()
unmap_folio()
change ptes to migration entries
__split_folio_to_order() softleaf_to_folio()
set flags(including PG_locked) for tail pages folio = pfn_folio(softleaf_to_pfn(entry))
smp_wmb() VM_WARN_ON_ONCE(!folio_test_locked(folio))
prep_compound_page() for tail pages
In __split_folio_to_order(), smp_wmb() guarantees page flags of tail pages
are visible before the tail page becomes non-compound. smp_wmb() should
be paired with smp_rmb() in softleaf_to_folio(), which is missed. As a
result, if zap_nonpresent_ptes() accesses migration entry that stores tail
pfn, softleaf_to_folio() may see the updated compound_head of tail page
before page->flags.
This issue will trigger VM_WARN_ON_ONCE() in pfn_swap_entry_folio()
because of the race between folio split and zap_nonpresent_ptes()
leading to a folio incorrectly undergoing modification without a folio
lock being held.
This is a BUG_ON() before commit 93976a20345b ("mm: eliminate further
swapops predicates"), which in merged in v6.19-rc1.
To fix it, add missing smp_rmb() if the softleaf entry is migration entry
in softleaf_to_folio() and softleaf_to_page().
[tujinjiang@huawei.com: update function name and comments] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/pagewalk: fix race between concurrent split and refault
The splitting of a PUD entry in walk_pud_range() can race with a
concurrent thread refaulting the PUD leaf entry causing it to try walking
a PMD range that has disappeared.
An example and reproduction of this is to try reading numa_maps of a
process while VFIO-PCI is setting up DMA (specifically the
vfio_pin_pages_remote call) on a large BAR for that process.
This will trigger a kernel BUG:
vfio-pci 0000:03:00.0: enabling device (0000 -> 0002)
BUG: unable to handle page fault for address: ffffa23980000000
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
...
RIP: 0010:walk_pgd_range+0x3b5/0x7a0
Code: 8d 43 ff 48 89 44 24 28 4d 89 ce 4d 8d a7 00 00 20 00 48 8b 4c 24
28 49 81 e4 00 00 e0 ff 49 8d 44 24 ff 48 39 c8 4c 0f 43 e3 <49> f7 06
9f ff ff ff 75 3b 48 8b 44 24 20 48 8b 40 28 48 85 c0 74
RSP: 0018:ffffac23e1ecf808 EFLAGS: 00010287
RAX: 00007f44c01fffff RBX: 00007f4500000000 RCX: 00007f44ffffffff
RDX: 0000000000000000 RSI: 000ffffffffff000 RDI: ffffffff93378fe0
RBP: ffffac23e1ecf918 R08: 0000000000000004 R09: ffffa23980000000
R10: 0000000000000020 R11: 0000000000000004 R12: 00007f44c0200000
R13: 00007f44c0000000 R14: ffffa23980000000 R15: 00007f44c0000000
FS: 00007fe884739580(0000) GS:ffff9b7d7a9c0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa23980000000 CR3: 000000c0650e2005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
__walk_page_range+0x195/0x1b0
walk_page_vma+0x62/0xc0
show_numa_map+0x12b/0x3b0
seq_read_iter+0x297/0x440
seq_read+0x11d/0x140
vfs_read+0xc2/0x340
ksys_read+0x5f/0xe0
do_syscall_64+0x68/0x130
? get_page_from_freelist+0x5c2/0x17e0
? mas_store_prealloc+0x17e/0x360
? vma_set_page_prot+0x4c/0xa0
? __alloc_pages_noprof+0x14e/0x2d0
? __mod_memcg_lruvec_state+0x8d/0x140
? __lruvec_stat_mod_folio+0x76/0xb0
? __folio_mod_stat+0x26/0x80
? do_anonymous_page+0x705/0x900
? __handle_mm_fault+0xa8d/0x1000
? __count_memcg_events+0x53/0xf0
? handle_mm_fault+0xa5/0x360
? do_user_addr_fault+0x342/0x640
? arch_exit_to_user_mode_prepare.constprop.0+0x16/0xa0
? irqentry_exit_to_user_mode+0x24/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fe88464f47e
Code: c0 e9 b6 fe ff ff 50 48 8d 3d be 07 0b 00 e8 69 01 02 00 66 0f 1f
84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00
f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28
RSP: 002b:00007ffe6cd9a9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fe88464f47e
RDX: 0000000000020000 RSI: 00007fe884543000 RDI: 0000000000000003
RBP: 00007fe884543000 R08: 00007fe884542010 R09: 0000000000000000
R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
</TASK>
Fix this by validating the PUD entry in walk_pmd_range() using a stable
snapshot (pudp_get()). If the PUD is not present or is a leaf, retry the
walk via ACTION_AGAIN instead of descending further. This mirrors the
retry logic in walk_pte_range(), which lets walk_pmd_range() retry if the
PTE is not being got by pte_offset_map_lock(). |
| In the Linux kernel, the following vulnerability has been resolved:
PM: runtime: Fix a race condition related to device removal
The following code in pm_runtime_work() may dereference the dev->parent
pointer after the parent device has been freed:
/* Maybe the parent is now able to suspend. */
if (parent && !parent->power.ignore_children) {
spin_unlock(&dev->power.lock);
spin_lock(&parent->power.lock);
rpm_idle(parent, RPM_ASYNC);
spin_unlock(&parent->power.lock);
spin_lock(&dev->power.lock);
}
Fix this by inserting a flush_work() call in pm_runtime_remove().
Without this patch blktest block/001 triggers the following complaint
sporadically:
BUG: KASAN: slab-use-after-free in lock_acquire+0x70/0x160
Read of size 1 at addr ffff88812bef7198 by task kworker/u553:1/3081
Workqueue: pm pm_runtime_work
Call Trace:
<TASK>
dump_stack_lvl+0x61/0x80
print_address_description.constprop.0+0x8b/0x310
print_report+0xfd/0x1d7
kasan_report+0xd8/0x1d0
__kasan_check_byte+0x42/0x60
lock_acquire.part.0+0x38/0x230
lock_acquire+0x70/0x160
_raw_spin_lock+0x36/0x50
rpm_suspend+0xc6a/0xfe0
rpm_idle+0x578/0x770
pm_runtime_work+0xee/0x120
process_one_work+0xde3/0x1410
worker_thread+0x5eb/0xfe0
kthread+0x37b/0x480
ret_from_fork+0x6cb/0x920
ret_from_fork_asm+0x11/0x20
</TASK>
Allocated by task 4314:
kasan_save_stack+0x2a/0x50
kasan_save_track+0x18/0x40
kasan_save_alloc_info+0x3d/0x50
__kasan_kmalloc+0xa0/0xb0
__kmalloc_noprof+0x311/0x990
scsi_alloc_target+0x122/0xb60 [scsi_mod]
__scsi_scan_target+0x101/0x460 [scsi_mod]
scsi_scan_channel+0x179/0x1c0 [scsi_mod]
scsi_scan_host_selected+0x259/0x2d0 [scsi_mod]
store_scan+0x2d2/0x390 [scsi_mod]
dev_attr_store+0x43/0x80
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3ef/0x670
vfs_write+0x506/0x1470
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x213/0x1810
do_syscall_64+0xee/0xfc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 4314:
kasan_save_stack+0x2a/0x50
kasan_save_track+0x18/0x40
kasan_save_free_info+0x3f/0x50
__kasan_slab_free+0x67/0x80
kfree+0x225/0x6c0
scsi_target_dev_release+0x3d/0x60 [scsi_mod]
device_release+0xa3/0x220
kobject_cleanup+0x105/0x3a0
kobject_put+0x72/0xd0
put_device+0x17/0x20
scsi_device_dev_release+0xacf/0x12c0 [scsi_mod]
device_release+0xa3/0x220
kobject_cleanup+0x105/0x3a0
kobject_put+0x72/0xd0
put_device+0x17/0x20
scsi_device_put+0x7f/0xc0 [scsi_mod]
sdev_store_delete+0xa5/0x120 [scsi_mod]
dev_attr_store+0x43/0x80
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3ef/0x670
vfs_write+0x506/0x1470
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x213/0x1810 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Prevent concurrent access to IPSec ASO context
The query or updating IPSec offload object is through Access ASO WQE.
The driver uses a single mlx5e_ipsec_aso struct for each PF, which
contains a shared DMA-mapped context for all ASO operations.
A race condition exists because the ASO spinlock is released before
the hardware has finished processing WQE. If a second operation is
initiated immediately after, it overwrites the shared context in the
DMA area.
When the first operation's completion is processed later, it reads
this corrupted context, leading to unexpected behavior and incorrect
results.
This commit fixes the race by introducing a private context within
each IPSec offload object. The shared ASO context is now copied to
this private context while the ASO spinlock is held. Subsequent
processing uses this saved, per-object context, ensuring its integrity
is maintained. |
