| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Sony XAV-AX8500 Bluetooth Packet Handling Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected Sony XAV-AX8500 devices. An attacker must first obtain the ability to pair a malicious Bluetooth device with the target system in order to exploit this vulnerability.
The specific flaw exists within the handling of Bluetooth packets. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before writing to memory. An attacker can leverage this vulnerability to execute code in the context of the elysian-bt-service process. Was ZDI-CAN-26283. |
| Craft is a content management system. Versions of Craft CMS on the 4.x branch prior to 4.14.13 and on the 5.x branch prior to 5.6.16 contains a potential remote code execution vulnerability via Twig SSTI. One must have administrator access and `ALLOW_ADMIN_CHANGES` must be enabled for this to work. Users should update to the patched versions 4.14.13 or 5.6.15 to mitigate the issue. |
| Jellyfin is an open source self hosted media server. Versions before 10.10.7 are vulnerable to argument injection in FFmpeg. This can be leveraged to possibly achieve remote code execution by anyone with credentials to a low-privileged user. This vulnerability was previously reported in CVE-2023-49096 and patched in version 10.8.13, but the patch can be bypassed. The original fix sanitizes some parameters to make injection impossible, but certain unsanitized parameters can still be used for argument injection. The same unauthenticated endpoints are vulnerable: /Videos/<itemId>/stream and /Videos/<itemId>/stream.<container>, likely alongside similar endpoints in AudioController. This argument injection can be exploited to achieve arbitrary file write, leading to possible remote code execution through the plugin system. While the unauthenticated endpoints are vulnerable, a valid itemId is required for exploitation and any authenticated attacker could easily retrieve a valid itemId to make the exploit work. This vulnerability is patched in version 10.10.7. |
| Luxion KeyShot PVS File Parsing Access of Uninitialized Pointer Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Luxion KeyShot. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of pvs files. The issue results from the lack of proper initialization of a pointer prior to accessing it. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-23694. |
| Luxion KeyShot Viewer KSP File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Luxion KeyShot Viewer. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of KSP files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-24586. |
| In version v12 of parisneo/lollms-webui, the 'Send file to AL' function allows uploading files with various extensions, including potentially dangerous ones like .py, .sh, .bat, and more. Attackers can exploit this by uploading files with malicious content and then using the '/open_file' API endpoint to execute these files. The vulnerability arises from the use of 'subprocess.Popen' to open files without proper validation, leading to potential remote code execution. |
| A remote code execution vulnerability in the project management of Wanxing Technology's Yitu project which allows an attacker to use the exp.adpx file as a zip compressed file to construct a special file name, which can be used to decompress the project file into the system startup folder, restart the system, and automatically execute the constructed attack script. |
| A remote code execution vulnerability exists in invoke-ai/invokeai versions 5.3.1 through 5.4.2 via the /api/v2/models/install API. The vulnerability arises from unsafe deserialization of model files using torch.load without proper validation. Attackers can exploit this by embedding malicious code in model files, which is executed upon loading. This issue is fixed in version 5.4.3. |
| Allegra uploadSimpleFile Directory Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Allegra. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed.
The specific flaw exists within the uploadSimpleFile method. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of LOCAL SERVICE. Was ZDI-CAN-22527. |
| The File Manager Pro WordPress plugin before 1.8.1 allows admin users to upload arbitrary files, even in environments where such a user should not be able to gain full control of the server, such as a multisite installation. This leads to remote code execution. |
| yt-dlp is a youtube-dl fork with additional features and fixes. yt-dlp allows the user to provide shell command lines to be executed at various stages in its download steps through the `--exec` flag. This flag allows output template expansion in its argument, so that metadata values may be used in the shell commands. The metadata fields can be combined with the `%q` conversion, which is intended to quote/escape these values so they can be safely passed to the shell. However, the escaping used for `cmd` (the shell used by Python's `subprocess` on Windows) does not properly escape special characters, which can allow for remote code execution if `--exec` is used directly with maliciously crafted remote data. This vulnerability only impacts `yt-dlp` on Windows, and the vulnerability is present regardless of whether `yt-dlp` is run from `cmd` or from `PowerShell`. Support for output template expansion in `--exec`, along with this vulnerable behavior, was added to `yt-dlp` in version 2021.04.11. yt-dlp version 2023.09.24 fixes this issue by properly escaping each special character. `\n` will be replaced by `\r` as no way of escaping it has been found. It is recommended to upgrade yt-dlp to version 2023.09.24 as soon as possible. Also, always be careful when using --exec, because while this specific vulnerability has been patched, using unvalidated input in shell commands is inherently dangerous. For Windows users who are not able to upgrade: 1. Avoid using any output template expansion in --exec other than {} (filepath). 2. If expansion in --exec is needed, verify the fields you are using do not contain ", | or &. 3. Instead of using --exec, write the info json and load the fields from it instead.
|
| XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. The create action is vulnerable to a CSRF attack, allowing script and thus remote code execution when targeting a user with script/programming right, thus compromising the confidentiality, integrity and availability of the whole XWiki installation. When a user with script right views this image and a log message `ERROR foo - Script executed!` appears in the log, the XWiki installation is vulnerable. This has been patched in XWiki 14.10.9 and 15.4RC1 by requiring a CSRF token for the actual page creation. |
| An uninitialized pointer use vulnerability exists in the functionality of WPS Office 11.2.0.11537 that handles Data elements in an Excel file. A specially crafted malformed file can lead to remote code execution. An attacker can provide a malicious file to trigger this vulnerability. |
| Certain versions of the Atlassian Companion App for MacOS were affected by a remote code execution vulnerability. An attacker could utilize WebSockets to bypass Atlassian Companion’s blocklist and MacOS Gatekeeper to allow execution of code. |
| This vulnerability, if exploited, allows an attacker to perform privileged RCE (Remote Code Execution) on machines with the Assets Discovery agent installed. The vulnerability exists between the Assets Discovery application (formerly known as Insight Discovery) and the Assets Discovery agent. |
| This High severity RCE (Remote Code Execution) vulnerability was introduced in version 8.0.0 of Bitbucket Data Center and Server. This RCE (Remote Code Execution) vulnerability, with a CVSS Score of 8.5, allows an authenticated attacker to execute arbitrary code which has high impact to confidentiality, high impact to integrity, high impact to availability, and requires no user interaction. Atlassian recommends that Bitbucket Data Center and Server customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions: Bitbucket Data Center and Server 8.9: Upgrade to a release greater than or equal to 8.9.5 Bitbucket Data Center and Server 8.10: Upgrade to a release greater than or equal to 8.10.5 Bitbucket Data Center and Server 8.11: Upgrade to a release greater than or equal to 8.11.4 Bitbucket Data Center and Server 8.12: Upgrade to a release greater than or equal to 8.12.2 Bitbucket Data Center and Server 8.13: Upgrade to a release greater than or equal to 8.13.1 Bitbucket Data Center and Server 8.14: Upgrade to a release greater than or equal to 8.14.0 Bitbucket Data Center and Server version >= 8.0 and < 8.9: Upgrade to any of the listed fix versions. See the release notes (https://confluence.atlassian.com/bitbucketserver/release-notes). You can download the latest version of Bitbucket Data Center and Server from the download center (https://www.atlassian.com/software/bitbucket/download-archives). This vulnerability was discovered by a private user and reported via our Bug Bounty program |
| An authenticated, remote attacker may use a stack based out-of-bounds write vulnerability in the CmpTraceMgr Component of multiple CODESYS products in multiple versions to write data into the stack which can lead to a denial-of-service condition, memory overwriting, or remote code execution. |
| An authenticated, remote attacker may use a stack based out-of-bounds write vulnerability in the CmpTraceMgr Component of multiple CODESYS products in multiple versions to write data into the stack which can lead to a denial-of-service condition, memory overwriting, or remote code execution. |
| A vulnerability was found in X.Org. This security flaw occurs becuase the swap handler for the XTestFakeInput request of the XTest extension may corrupt the stack if GenericEvents with lengths larger than 32 bytes are sent through a the XTestFakeInput request. This issue can lead to local privileges elevation on systems where the X server is running privileged and remote code execution for ssh X forwarding sessions. This issue does not affect systems where client and server use the same byte order. |
| An improper limitation of a pathname to a restricted directory vulnerability was identified in GitHub Enterprise Server that enabled remote code execution. A check was added within Pages to ensure the working directory is clean before unpacking new content to prevent an arbitrary file overwrite bug. This vulnerability affected only version 3.7.0 of GitHub Enterprise Server and was fixed in version 3.7.1. This vulnerability was reported via the GitHub Bug Bounty program. |
