| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Microsoft Word 2007 SP3, Office 2010 SP2, Word 2010 SP2, Word 2013 SP1, Word 2013 RT SP1, Office 2016, Word 2016, Word for Mac 2011, Word 2016 for Mac, Office Compatibility Pack SP3, Word Automation Services on SharePoint Server 2010 SP2, Word Automation Services on SharePoint Server 2013 SP1, Office Web Apps 2010 SP2, Office Web Apps Server 2013 SP1, and Office Online Server allow remote attackers to execute arbitrary code via a crafted Office document, aka "Microsoft Office Memory Corruption Vulnerability." |
| Heap-based buffer overflow in Microsoft Office Access allows an unauthorized attacker to execute code over a network. |
| A crafted input message can cause a buffer overflow in HPE Nonstop KMS Server. |
| obsidian-tc is a governed, agent-ready Model Context Protocol server for Obsidian vaults. Prior to 1.3.1, undefined readPaths and writePaths settings allow all paths, strictReadDefault does not protect direct requests, and the .obsidian, .git, and .trash control directories are excluded only during enumeration. An authenticated caller can directly read sensitive files such as .obsidian/plugins/*/data.json, potentially exposing plugin API keys, Obsidian Sync passwords, and other in-vault data. Version 1.3.1 fixes the vulnerability by denying the control directories by default and enforcing strictReadDefault on direct request paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: validate auto buf reg before taking uring_cmd
With UBLK_F_AUTO_BUF_REG, invalid sqe->addr can fail after
ublk_fill_io_cmd() has set UBLK_IO_FLAG_ACTIVE. The uring_cmd is
completed while the tag stays active, which can hang teardown.
Split validation from buffer apply so the check has no side effects,
then take the uring_cmd and store the already-validated buffer. Apply
the same order in FETCH so io->buf is not written before __ublk_fetch()
state checks. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Validate MSI data before routing it to EIOINTC
pch_msi_set_irq() passes e->msi.data straight into eiointc_set_irq() as
the irq number. The MSI data comes from userspace, that either via a
KVM_IRQ_ROUTING_MSI entry set with KVM_SET_GSI_ROUTING (used by irqfd
and KVM_IRQ_LINE) or directly via KVM_SIGNAL_MSI, and is never checked
against EIOINTC_IRQS.
eiointc_set_irq() uses the value with __set_bit()/__clear_bit() on the
256-bit isr bitmap, eiointc_update_irq() then indexes sw_coremap[] and
the per-cpu coreisr/sw_coreisr bitmaps with it. Therefore a data value
>= 256 reads and writes memory past the end of those arrays, i.e. any
process holding a VM fd can corrupt kernel memory beyond the allocation
of loongarch_eiointc.
Reject MSI data that doesn't fit in the EIOINTC irq space. The DMSINTC
path is unaffected as it decodes the vector from the address and masks
it. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Improve EP11 CPRB length and overflow checks
The xcrb_msg_to_type6_ep11cprb_msgx() function lacks proper input
validation, creating security vulnerabilities:
1. Missing minimum size validation: The ep11_cprb structure and
subsequent payload fields (pld_tag, pld_lenfmt) are copied from
userspace without verifying sufficient buffer length.
2. Arithmetic overflow in length calculations: CEIL4 alignment could
overflow, bypassing size checks and enabling buffer overflows.
3. The payload is asn1 encoded but the function just uses a simple c
struct overlay to access some fields of the payload.
Fix by using size_t for length calculations, adding U32_MAX boundary
checks after alignment, and validating minimum request size and
minimum reply size before copying from userspace. Do a very simple
asn1 parsing of the payload up to the function value field. |
| The Spin Wheel WordPress plugin before 2.2.1 does not verify that a visitor actually performed a legitimate spin before returning and consuming a configured prize coupon, allowing unauthenticated users to disclose and drain the stored coupon codes of any campaign, including unpublished ones. |
| The Easy HTTPS Redirection (SSL) WordPress plugin before 2.0.2 does not perform capability checks in some of its AJAX actions, allowing any authenticated user, such as a Subscriber, to read URLs its content scanner collected from private and draft posts and from site options, and to trigger a site-wide rewrite of those URLs, once an administrator has run a scan. |
| SurrealDB before 3.3.0 contains an authorization bypass vulnerability that allows record users to infer field values hidden by field-level SELECT permissions using LIVE SELECT WHERE predicates over $before or $after. Attackers can craft repeated predicates and observe whether notifications are delivered on CREATE, UPDATE, or DELETE to confirm or narrow restricted field values. |
| Open WebUI from 0.6.27 before 0.11.4 contains an information disclosure vulnerability that allows destination servers to obtain user session cookies by receiving the full browser cookie jar on OAuth-mode connections. Operators of OpenAI-compatible connections, OpenAPI tool servers or terminal servers can capture forwarded session cookies from routine requests and replay them to hijack accounts, including administrators. |
| Gitea's repository migration and pull mirror egress checks could be bypassed with a hostname that returns multiple DNS answers, because the address that was validated was not necessarily the address Git later connected to. A low-privileged user who can create migrations or mirrors could direct the server to internal services, reading from and writing to reachable internal Git or HTTP endpoints. Content from internal responses could additionally be disclosed through migration and mirror error messages. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject userspace cifs.spnego descriptions
cifs.spnego key descriptions contain authority-bearing fields such as
pid, uid, creduid, and upcall_target that cifs.upcall treats as
kernel-originating inputs. However, userspace can also create keys of
this type through request_key(2) or add_key(2), allowing those fields to
be supplied without CIFS origin.
Only accept cifs.spnego descriptions while CIFS is using its private
spnego_cred to request the key. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Compare MACs in constant time
To prevent timing attacks, MAC comparisons need to be constant-time.
Replace the memcmp() with the correct function, crypto_memneq(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: let net.core.dev_weight always be non-zero
The following problem was encountered during stability test:
(NULL net_device): NAPI poll function process_backlog+0x0/0x530 \
returned 1, exceeding its budget of 0.
------------[ cut here ]------------
list_add double add: new=ffff88905f746f48, prev=ffff88905f746f48, \
next=ffff88905f746e40.
WARNING: CPU: 18 PID: 5462 at lib/list_debug.c:35 \
__list_add_valid_or_report+0xf3/0x130
CPU: 18 UID: 0 PID: 5462 Comm: ping Kdump: loaded Not tainted 6.13.0-rc7+
RIP: 0010:__list_add_valid_or_report+0xf3/0x130
Call Trace:
? __warn+0xcd/0x250
? __list_add_valid_or_report+0xf3/0x130
enqueue_to_backlog+0x923/0x1070
netif_rx_internal+0x92/0x2b0
__netif_rx+0x15/0x170
loopback_xmit+0x2ef/0x450
dev_hard_start_xmit+0x103/0x490
__dev_queue_xmit+0xeac/0x1950
ip_finish_output2+0x6cc/0x1620
ip_output+0x161/0x270
ip_push_pending_frames+0x155/0x1a0
raw_sendmsg+0xe13/0x1550
__sys_sendto+0x3bf/0x4e0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x5b/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The reproduction command is as follows:
sysctl -w net.core.dev_weight=0
ping 127.0.0.1
This is because when the napi's weight is set to 0, process_backlog() may
return 0 and clear the NAPI_STATE_SCHED bit of napi->state, causing this
napi to be re-polled in net_rx_action() until __do_softirq() times out.
Since the NAPI_STATE_SCHED bit has been cleared, napi_schedule_rps() can
be retriggered in enqueue_to_backlog(), causing this issue.
Making the napi's weight always non-zero solves this problem.
Triggering this issue requires system-wide admin (setting is
not namespaced). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Send signals asynchronously if !preemptible
BPF programs can execute in all kinds of contexts and when a program
running in a non-preemptible context uses the bpf_send_signal() kfunc,
it will cause issues because this kfunc can sleep.
Change `irqs_disabled()` to `!preemptible()`. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: only set fullmesh for subflow endp
With the in-kernel path-manager, it is possible to change the 'fullmesh'
flag. The code in mptcp_pm_nl_fullmesh() expects to change it only on
'subflow' endpoints, to recreate more or less subflows using the linked
address.
Unfortunately, the set_flags() hook was a bit more permissive, and
allowed 'implicit' endpoints to get the 'fullmesh' flag while it is not
allowed before.
That's what syzbot found, triggering the following warning:
WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 __mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline]
WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline]
WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline]
WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064
Modules linked in:
CPU: 0 UID: 0 PID: 6499 Comm: syz.1.413 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline]
RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline]
RIP: 0010:mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline]
RIP: 0010:mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064
Code: 01 00 00 49 89 c5 e8 fb 45 e8 f5 e9 b8 fc ff ff e8 f1 45 e8 f5 4c 89 f7 be 03 00 00 00 e8 44 1d 0b f9 eb a0 e8 dd 45 e8 f5 90 <0f> 0b 90 e9 17 ff ff ff 89 d9 80 e1 07 38 c1 0f 8c c9 fc ff ff 48
RSP: 0018:ffffc9000d307240 EFLAGS: 00010293
RAX: ffffffff8bb72e03 RBX: 0000000000000000 RCX: ffff88807da88000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc9000d307430 R08: ffffffff8bb72cf0 R09: 1ffff1100b842a5e
R10: dffffc0000000000 R11: ffffed100b842a5f R12: ffff88801e2e5ac0
R13: ffff88805c214800 R14: ffff88805c2152e8 R15: 1ffff1100b842a5d
FS: 00005555619f6500(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020002840 CR3: 00000000247e6000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2542
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:726
____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583
___sys_sendmsg net/socket.c:2637 [inline]
__sys_sendmsg+0x269/0x350 net/socket.c:2669
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5fe8785d29
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff571f5558 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f5fe8975fa0 RCX: 00007f5fe8785d29
RDX: 0000000000000000 RSI: 0000000020000480 RDI: 0000000000000007
RBP: 00007f5fe8801b08 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f5fe8975fa0 R14: 00007f5fe8975fa0 R15: 000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Stop active perfmon if it is being destroyed
If the active performance monitor (`v3d->active_perfmon`) is being
destroyed, stop it first. Currently, the active perfmon is not
stopped during destruction, leaving the `v3d->active_perfmon` pointer
stale. This can lead to undefined behavior and instability.
This patch ensures that the active perfmon is stopped before being
destroyed, aligning with the behavior introduced in commit
7d1fd3638ee3 ("drm/v3d: Stop the active perfmon before being destroyed"). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-thrustmaster: Fix warning in thrustmaster_probe by adding endpoint check
syzbot has found a type mismatch between a USB pipe and the transfer
endpoint, which is triggered by the hid-thrustmaster driver[1].
There is a number of similar, already fixed issues [2].
In this case as in others, implementing check for endpoint type fixes the issue.
[1] https://syzkaller.appspot.com/bug?extid=040e8b3db6a96908d470
[2] https://syzkaller.appspot.com/bug?extid=348331f63b034f89b622 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: Fix assumption that Resolution Multipliers must be in Logical Collections
A report in 2019 by the syzbot fuzzer was found to be connected to two
errors in the HID core associated with Resolution Multipliers. One of
the errors was fixed by commit ea427a222d8b ("HID: core: Fix deadloop
in hid_apply_multiplier."), but the other has not been fixed.
This error arises because hid_apply_multipler() assumes that every
Resolution Multiplier control is contained in a Logical Collection,
i.e., there's no way the routine can ever set multiplier_collection to
NULL. This is in spite of the fact that the function starts with a
big comment saying:
* "The Resolution Multiplier control must be contained in the same
* Logical Collection as the control(s) to which it is to be applied.
...
* If no Logical Collection is
* defined, the Resolution Multiplier is associated with all
* controls in the report."
* HID Usage Table, v1.12, Section 4.3.1, p30
*
* Thus, search from the current collection upwards until we find a
* logical collection...
The comment and the code overlook the possibility that none of the
collections found may be a Logical Collection.
The fix is to set the multiplier_collection pointer to NULL if the
collection found isn't a Logical Collection. |
