| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix UAF in __blkcg_rstat_flush()
When multiple blkgs in the same blkcg are released concurrently,
a use-after-free can occur. The race happens when one blkg's
__blkcg_rstat_flush() removes another blkg's iostat entries via
llist_del_all(). The second blkg sees an empty list and proceeds
to free itself while the first is still iterating over its entries.
Move the flush from __blkg_release() (RCU callback) to blkg_release()
(before call_rcu). This ensures the RCU grace period waits for any
concurrent flush's rcu_read_lock() section to complete before freeing. |
| In the Linux kernel, the following vulnerability has been resolved:
pNFS: Fix use-after-free in pnfs_update_layout()
When hitting the NFS_LAYOUT_RETURN branch in pnfs_update_layout(),
the code calls pnfs_prepare_to_retry_layoutget(lo). If it succeeds,
pnfs_put_layout_hdr(lo) is called before trace_pnfs_update_layout(),
which still references 'lo'. This results in a use-after-free when the
tracepoint accesses lo's fields.
Fix this by moving the tracepoint call before pnfs_put_layout_hdr(lo). |
| In the Linux kernel, the following vulnerability has been resolved:
9p: avoid putting oldfid in p9_client_walk() error path
When p9_client_walk() is called with clone set to false, fid aliases
oldfid. If the walk subsequently fails after the request has been sent,
the error path jumps to clunk_fid, which currently calls p9_fid_put(fid)
unconditionally.
This drops a reference to oldfid even though ownership of oldfid remains
with the caller. If this is the last reference, oldfid can be clunked and
destroyed while the caller still expects it to be valid. A later use or
put of oldfid can then trigger a use-after-free or refcount underflow.
Fix this by only putting fid in the clunk_fid error path when it does not
alias oldfid, matching the existing guard in the error path below.
This can be triggered when a multi-component walk is split into multiple
p9_client_walk() calls and a later non-cloning walk fails. A reproducer
and refcount warning logs are available on request. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails
dw8250_probe() registers the 8250 port via serial8250_register_8250_port()
and then, if the device has a clock, registers a clock notifier. If
clk_notifier_register() fails, probe returns the error but leaves the
8250 port registered. The matching serial8250_unregister_port() lives
in dw8250_remove(), which is not called when probe fails, so the port
slot stays occupied until the device is rebound or the system is
rebooted. The devm-allocated driver data is freed while the port still
references it (via the saved private_data and serial_in/serial_out
callbacks), so any access to that port slot before a rebind is a
use-after-free hazard.
Unregister the port on the clk_notifier_register() error path. |
| In the Linux kernel, the following vulnerability has been resolved:
virtiofs: fix UAF on submount umount
iput() called from fuse_release_end() can Oops if the super block has
already been destroyed. Normally this is prevented by waiting for
num_waiting to go down to zero before commencing with super block shutdown.
This only works, however, for the last submount instance, as the wait
counter is per connection, not per superblock.
Revert to using synchronous release requests for the auto_submounts case,
which is virtiofs only at this time. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()
l2cap_chan_close() removes the channel from conn->chan_l, which
must be done under conn->lock. cleanup_listen() runs under the
parent sk_lock, so acquiring conn->lock would invert the
established conn->lock -> chan->lock -> sk_lock order.
Instead of calling l2cap_chan_close() directly, schedule
l2cap_chan_timeout with delay 0 to close the channel
asynchronously. The timeout handler already acquires conn->lock
and chan->lock in the correct order.
The timer is only armed when chan->conn is still set: if it is
already NULL, l2cap_conn_del() has already processed this channel
(l2cap_chan_del + l2cap_sock_teardown_cb + l2cap_sock_close_cb),
so there is nothing left to do. If l2cap_conn_del() races in
after the timer is armed, __clear_chan_timer() inside
l2cap_chan_del() cancels it; if the timer has already fired, the
handler returns harmlessly because chan->conn was cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()
bt_accept_dequeue() unlinks a not-yet-accepted child from the parent
accept queue and release_sock()s it before returning, so the returned
sk has no caller reference and is unlocked.
l2cap_sock_cleanup_listen() walks these children on listening-socket
close. A concurrent HCI disconnect drives hci_rx_work ->
l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and
frees the child sk and its l2cap_chan; cleanup_listen() then uses both:
BUG: KASAN: slab-use-after-free in l2cap_sock_kill
l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close
Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_kill
This is distinct from the two fixes already in this area: commit
e83f5e24da741 ("Bluetooth: serialize accept_q access") serialises the
accept_q list/poll and takes temporary refs inside bt_accept_dequeue(),
and CVE-2025-39860 serialises the userspace close()/accept() race by
calling cleanup_listen() under lock_sock() in l2cap_sock_release().
Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF
still reproduces on current bluetooth/master.
Take the reference at the source: bt_accept_dequeue() does sock_hold()
while sk is still locked, before release_sock(); callers sock_put().
cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under
a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops
it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on
SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under
the parent sk lock and that would invert
conn->lock -> chan->lock -> sk_lock (lockdep).
KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced
12 use-after-free reports per run before this change; 0, and no lockdep
report, over 1600+ raced iterations after it on bluetooth/master. |
| In the Linux kernel, the following vulnerability has been resolved:
fhandle: fix UAF due to unlocked ->mnt_ns read in may_decode_fh()
may_decode_fh() accesses mount::mnt_ns without holding any locks; that
means the mount can concurrently be unmounted, and the mnt_namespace can
concurrently be freed after an RCU grace period.
This race can happens as follows, assuming that the mount point was
created by open_tree(..., OPEN_TREE_CLONE):
thread 1 thread 2 RCU
__do_sys_open_by_handle_at
do_handle_open
handle_to_path
may_decode_fh
is_mounted
[mount::mnt_ns access]
[mount::mnt_ns access]
__do_sys_close
fput_close_sync
__fput
dissolve_on_fput
umount_tree
class_namespace_excl_destructor
namespace_unlock
free_mnt_ns
mnt_ns_tree_remove
call_rcu(mnt_ns_release_rcu)
mnt_ns_release_rcu
mnt_ns_release
kfree
[mnt_namespace::user_ns access] **UAF**
Fix it by taking rcu_read_lock() around the mount::mnt_ns access, like
in __prepend_path().
Additionally, document the semantics of mount::mnt_ns, and use WRITE_ONCE()
for writers that can race with lockless readers.
This bug is unreachable unless one of the following is set:
- CONFIG_PREEMPTION
- CONFIG_RCU_STRICT_GRACE_PERIOD
because it requires an RCU grace period to happen during a syscall without
an explicit preemption.
This doesn't seem to have interesting security impact; worst-case, it could
leak the result of an integer comparison to userspace (from the level
check in cap_capable()), cause an endless loop, or crash the kernel by
dereferencing an invalid address. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/eustall: Fix drm_dev_put called before stream disable in close
In xe_eu_stall_stream_close(), drm_dev_put() is called before the
stream is disabled and its resources are freed. If this drops the
last reference, the device structures could be freed while the
subsequent cleanup code still accesses them, leading to a
use-after-free.
Fix this by moving drm_dev_put() after all device accesses are
complete. This matches the ordering in xe_oa_release().
(cherry picked from commit 35aff528f7297e949e5e19c9cd7fd748cf1cf21c) |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: Fix use-after-free when processing MLD queries
When processing an MLD query, a pointer to the multicast group address
is retrieved when initially parsing the packet. This pointer is later
dereferenced without being reloaded despite the fact that the skb header
might have been reallocated following the pskb_may_pull() calls, leading
to a use-after-free [1].
Fix by copying the multicast group address when the packet is initially
parsed.
[1]
BUG: KASAN: slab-use-after-free in __mld_query_work (net/ipv6/mcast.c:1512)
Read of size 8 at addr ffff8881154b8e90 by task kworker/4:1/118
Workqueue: mld mld_query_work
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_address_description.constprop.0 (mm/kasan/report.c:378)
print_report (mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
__mld_query_work (net/ipv6/mcast.c:1512)
mld_query_work (net/ipv6/mcast.c:1563)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
[...]
Freed by task 118:
kasan_save_stack (mm/kasan/common.c:57)
kasan_save_track (mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:584)
__kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285)
kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6251 mm/slub.c:6566)
pskb_expand_head (net/core/skbuff.c:2335)
__pskb_pull_tail (net/core/skbuff.c:2878 (discriminator 4))
__mld_query_work (net/ipv6/mcast.c:1495 (discriminator 1))
mld_query_work (net/ipv6/mcast.c:1563)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245) |
| In the Linux kernel, the following vulnerability has been resolved:
tee: optee: prevent use-after-free when the client exits before the supplicant
Commit 70b0d6b0a199 ("tee: optee: Fix supplicant wait loop") made the
client wait as killable so it can be interrupted during shutdown or
after a supplicant crash. This changes the original lifetime expectations:
the client task can now terminate while the supplicant is still processing
its request.
If the client exits first it removes the request from its queue and
kfree()s it, while the request ID remains in supp->idr. A subsequent
lookup on the supplicant path then dereferences freed memory, leading to
a use-after-free.
Serialise access to the request with supp->mutex:
* Hold supp->mutex in optee_supp_recv() and optee_supp_send() while
looking up and touching the request.
* Let optee_supp_thrd_req() notice that the client has terminated and
signal optee_supp_send() accordingly.
With these changes the request cannot be freed while the supplicant still
has a reference, eliminating the race. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: clear the svc scheduler ptr early on edit
ip_vs_edit_service() while unbinding the old scheduler clears
the svc->scheduler ptr after the scheduler module initiates
RCU callbacks. This can cause packets to use the old
scheduler at the time when svc->sched_data is already freed
after RCU grace period.
Fix it by clearing the ptr early in ip_vs_unbind_scheduler(),
before the done_service method schedules any RCU callbacks.
Also, if the new scheduler fails to initialize when replacing
the old scheduler, try to restore the old scheduler while still
returning the error code. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind()
rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock,
but returns the selected listener after dropping that lock without
taking a reference. rfcomm_connect_ind() then locks the listener,
queues a child socket on it, and may notify it after unlocking it.
The buggy scenario involves two paths, with each column showing the
order within that path:
rfcomm_connect_ind(): listener close:
1. Find parent in 1. close() enters
rfcomm_get_sock_by_channel() rfcomm_sock_release().
2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown()
without pinning parent. closes the listener.
3. Call lock_sock(parent) and 3. rfcomm_sock_kill()
bt_accept_enqueue(parent, unlinks and puts parent.
sk, true).
4. Read parent flags and may 4. parent can be freed.
call sk_state_change().
If close wins the race, parent can be freed before
rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or the
deferred-setup callback.
Take a reference on the listener before leaving rfcomm_sk_list.lock.
After lock_sock() succeeds, recheck that it is still in BT_LISTEN
before queueing a child, cache the deferred-setup bit while the parent
is locked, and drop the reference after the last parent use.
KASAN reported a slab-use-after-free in lock_sock_nested() from
rfcomm_connect_ind(), with the freeing stack going through
rfcomm_sock_kill() and rfcomm_sock_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx()
Fix the race by pruning the bin while still holding xfrm_policy_lock,
before dropping it. Use __xfrm_policy_inexact_prune_bin() directly since
the lock is already held. The wrapper xfrm_policy_inexact_prune_bin()
becomes unused and is removed.
Race:
CPU0 (XFRM_MSG_DELPOLICY) CPU1 (XFRM_MSG_NEWSPDINFO)
========================== ==========================
xfrm_policy_bysel_ctx():
spin_lock_bh(xfrm_policy_lock)
bin = xfrm_policy_inexact_lookup()
__xfrm_policy_unlink(pol)
spin_unlock_bh(xfrm_policy_lock)
xfrm_policy_kill(ret)
// wide window, lock not held
xfrm_hash_rebuild():
spin_lock_bh(xfrm_policy_lock)
__xfrm_policy_inexact_flush():
kfree_rcu(bin) // bin freed
spin_unlock_bh(xfrm_policy_lock)
xfrm_policy_inexact_prune_bin(bin)
// UAF: bin is freed |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: Forcibly close timer instances at closing
When snd_timer object is freed via snd_timer_free() and still pending
snd_timer_instance objects are assigned to the timer object, it tries
to unlink all instances and just set NULL to each ti->timer, then
releases the resources immediately. The problem is, however, when
there are slave timer instances that are associated with a master
instance linked to this timer: namely, those slave instances still
point to the freed timer object although the master instance is
unlinked, which may lead to user-after-free. The bug can be easily
triggered particularly when a new userspace-driven timers
(CONFIG_SND_UTIMER) is involved, since it can create and delete the
timer object via a simple file open/close, while the other
applications may keep accessing to that timer.
This patch is an attempt to paper over the problem above: now instead
of just unlinking, call snd_timer_close[_locked]() forcibly for each
pending timer instance, so that all assigned slave timer instances are
properly detached, too. Since snd_timer_close() might be called later
by the driver that created that instance, the check of
SNDRV_TIMER_IFLG_DEAD is added at the beginning, too. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: Fix UAF at snd_timer_user_params()
At releasing a timer object, e.g. when a userspace timer
(CONFIG_SND_UTIMER) gets closed and snd_timer_free() is called, it
tries to detach the timer instances and release the resources.
However, it's still possible that other in-flight tasks are holding
the timer instance where the to-be-deleted timer object is associated,
and this may lead to racy accesses.
Fortunately, most of ioctls dealing with the timer instance list
already have the protection with register_mutex, and this also avoids
such races. But, SNDRV_TIMER_IOCTL_PARAMS isn't protected, hence the
concurrent ioctl may lead to use-after-free.
This patch just adds the guard with register_mutex to protect
snd_timer_user_params() for covering the code path as a quick
workaround. It's no hot-path but rather a rarely issued ioctl, so the
performance penalty doesn't matter. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix stale offload->prog pointer after constant blinding
When a dev-bound-only BPF program (BPF_F_XDP_DEV_BOUND_ONLY) undergoes
JIT compilation with constant blinding enabled (bpf_jit_harden >= 2),
bpf_jit_blind_constants() clones the program. The original prog is then
freed in bpf_jit_prog_release_other(), which updates aux->prog to point
to the surviving clone, but fails to update offload->prog.
This leaves offload->prog pointing to the freed original program. When
the network namespace is subsequently destroyed, cleanup_net() triggers
bpf_dev_bound_netdev_unregister(), which iterates ondev->progs and calls
__bpf_prog_offload_destroy(offload->prog). Accessing the freed prog
causes a page fault:
BUG: unable to handle page fault for address: ffffc900085f1038
Workqueue: netns cleanup_net
RIP: 0010:__bpf_prog_offload_destroy+0xc/0x80
Call Trace:
__bpf_offload_dev_netdev_unregister+0x257/0x350
bpf_dev_bound_netdev_unregister+0x4a/0x90
unregister_netdevice_many_notify+0x2a2/0x660
...
cleanup_net+0x21a/0x320
The test sequence that triggers this reliably is:
1. Set net.core.bpf_jit_harden=2 (echo 2 > /proc/sys/net/core/bpf_jit_harden)
2. Run xdp_metadata selftest, which creates a dev-bound-only XDP
program on a veth inside a netns (./test_progs -t xdp_metadata)
3. cleanup_net -> page fault in __bpf_prog_offload_destroy
Dev-bound-only programs are unique in that they have an offload structure
but go through the normal JIT path instead of bpf_prog_offload_compile().
This means they are subject to constant blinding's prog clone-and-replace,
while also having offload->prog that must stay in sync.
Fix this by updating offload->prog in bpf_jit_prog_release_other(),
alongside the existing aux->prog update. Both are back-pointers to
the prog that must be kept in sync when the prog is replaced. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache policy smq: fix missing locks in invalidating cache blocks
In passthrough mode, the policy invalidate_mapping operation is called
simultaneously from multiple workers, thus it should be protected by a
lock. Otherwise, we might end up with data races on the allocated blocks
counter, or even use-after-free issues with internal data structures
when doing concurrent writes.
Note that the existing FIXME in smq_invalidate_mapping() doesn't affect
passthrough mode since migration tasks don't exist there, but would need
attention if supporting fast device shrinking via suspend/resume without
target reloading.
Reproduce steps:
1. Create a cache device consisting of 1024 cache entries
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. Populate the cache, and record the number of cached blocks
fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \
--size=64m --direct=1
nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}')
3. Reload the cache into passthrough mode
dmsetup suspend cache
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
dmsetup resume cache
4. Write to the passthrough cache. By setting multiple jobs with I/O
size equal to the cache block size, cache blocks are invalidated
concurrently from different workers.
fio --filename=/dev/mapper/cache --name=test --rw=randwrite --bs=64k \
--direct=1 --numjobs=2 --randrepeat=0 --size=64m
5. Check if demoted matches cached block count. These numbers should
match but may differ due to the data race.
nr_demoted=$(dmsetup status cache | awk '{print $12}')
echo "$nr_cached, $nr_demoted" |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: add some missing log locking
Function gfs2_logd() calls the log flushing functions gfs2_ail1_start(),
gfs2_ail1_wait(), and gfs2_ail1_empty() without holding sdp->sd_log_flush_lock,
but these functions require exclusion against concurrent transactions.
To fix that, add a non-locking __gfs2_log_flush() function. Then, in
gfs2_logd(), take sdp->sd_log_flush_lock before calling the above mentioned log
flushing functions and __gfs2_log_flush(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Take state lock for af_unix iter
When a BPF iterator program updates a sockmap, there is a race condition in
unix_stream_bpf_update_proto() where the `peer` pointer can become stale[1]
during a state transition TCP_ESTABLISHED -> TCP_CLOSE.
CPU0 bpf CPU1 close
-------- ----------
// unix_stream_bpf_update_proto()
sk_pair = unix_peer(sk)
if (unlikely(!sk_pair))
return -EINVAL;
// unix_release_sock()
skpair = unix_peer(sk);
unix_peer(sk) = NULL;
sock_put(skpair)
sock_hold(sk_pair) // UaF
More practically, this fix guarantees that the iterator program is
consistently provided with a unix socket that remains stable during
iterator execution.
[1]:
BUG: KASAN: slab-use-after-free in unix_stream_bpf_update_proto+0x155/0x490
Write of size 4 at addr ffff8881178c9a00 by task test_progs/2231
Call Trace:
dump_stack_lvl+0x5d/0x80
print_report+0x170/0x4f3
kasan_report+0xe4/0x1c0
kasan_check_range+0x125/0x200
unix_stream_bpf_update_proto+0x155/0x490
sock_map_link+0x71c/0xec0
sock_map_update_common+0xbc/0x600
sock_map_update_elem+0x19a/0x1f0
bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217
bpf_iter_run_prog+0x21e/0xae0
bpf_iter_unix_seq_show+0x1e0/0x2a0
bpf_seq_read+0x42c/0x10d0
vfs_read+0x171/0xb20
ksys_read+0xff/0x200
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 2236:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x63/0x80
kmem_cache_alloc_noprof+0x1d5/0x680
sk_prot_alloc+0x59/0x210
sk_alloc+0x34/0x470
unix_create1+0x86/0x8a0
unix_stream_connect+0x318/0x15b0
__sys_connect+0xfd/0x130
__x64_sys_connect+0x72/0xd0
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2236:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x70
__kasan_slab_free+0x47/0x70
kmem_cache_free+0x11c/0x590
__sk_destruct+0x432/0x6e0
unix_release_sock+0x9b3/0xf60
unix_release+0x8a/0xf0
__sock_release+0xb0/0x270
sock_close+0x18/0x20
__fput+0x36e/0xac0
fput_close_sync+0xe5/0x1a0
__x64_sys_close+0x7d/0xd0
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
