| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper access control in AMD Secure Encrypted Virtualization (SEV) firmware could allow a malicious hypervisor to bypass Reverse Map Table (RMP) protections, potentially impacting the integrity of Secure Encrypted Virtualization-Secure Nested Paging (SEV-SNP) guest memory. |
| On affected platforms running Arista EOS configured as S-BFD peers, an unauthenticated attacker could send a crafted S-BFD PDU to an initiator device. This crafted PDU could cause the kernel on the initiator device to crash, resulting in an unexpected device reboot. |
| On affected platforms running Arista EOS with a S-BFD reflector proxy configured, an unauthenticated attacker could send a crafted S-BFD Protocol Data Unit (PDU) that might cause the device to temporarily cease reflecting S-BFD packets, potentially resulting in S-BFD session timeouts. |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, node-forge accepted a PKCS#12 MAC or PKCS#12 password-based encryption iteration count of zero or less. pki.pbe.generatePkcs12Key() then returned a constant key independent of the password and salt, allowing crafted PKCS#12 input processed by forge.pkcs12.pkcs12FromAsn1() to bypass password-based integrity checks. Predictable encryption keys and IVs also affected PKCS#12 PBE using pbeWithSHAAnd3-KeyTripleDES-CBC or pbewithSHAAnd40BitRC2-CBC, including shrouded key bags, encrypted SafeContents, and PKCS#8 ENCRYPTED PRIVATE KEY input processed independently by forge.pki.decryptPrivateKeyInfo(). PBES2/PBKDF2-encrypted content is unaffected. This issue is fixed in version 1.4.1. |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, node-forge did not validate the AES-GCM tagLength option passed to start() during decryption through forge.cipher.createDecipher(). When an application derived tagLength from received data or used an unset or zero-like configuration value, a value that converted to zero together with an empty or missing authentication tag caused the calculated and supplied tags to compare as empty, so decipher.finish() accepted unauthenticated ciphertext. Applications that omit tagLength to use the 128-bit default or pass a fixed valid tag length are unaffected. This issue is fixed in version 1.4.1. |
| Improper validation of specified quantity in input in the MigTD vsock packet handling for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow a denial of service. System software adversary with a privileged user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| A memory corruption vulnerability caused by improper validation of messages |
| In the Exynos modem's IMS stack, Out of Bound access occurs due to improper validation. |
| Issue summary: An established DTLS 1.2 association using an AEAD cipher suite
can be terminated by a single unauthenticated datagram whose encrypted
fragment is shorter than the mandatory explicit IV and authentication tag
overhead.
Impact summary: An attacker who can send a datagram that is routed to an
existing DTLS 1.2 association can tear that association down without knowing
any key material. This is a Denial of Service limited to the targeted
association. There is no memory safety or confidentiality impact.
CWE: CWE-1284: Improper Validation of Specified Quantity in Input
Description: In TLS 1.2 and DTLS 1.2 every record protected by an AEAD cipher
suite carries an explicit IV followed by the ciphertext and an authentication
tag. When decrypting such a record the record layer passed the record length to
the cipher implementation before checking that the record was long enough to
contain the explicit IV and the tag. For a record shorter than that overhead the
cipher implementation rejected the impossible length, and the record layer
treated this as an internal failure and raised a fatal internal_error alert
instead of treating the record as one that failed authentication.
In TLS 1.2 the same record causes a fatal internal_error alert instead of the
expected bad_record_mac alert. Since any undecryptable record already
terminates a TLS connection, this is a protocol conformance issue rather than
a security issue in TLS.
The fix validates the record length against the explicit IV and tag length
before any AEAD processing, so that TLS reports bad_record_mac and DTLS
silently discards the record.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| A flaw was found in GStreamer's gst-plugins-good MOV/MP4 demuxer. When processing an uncompressed video track, qtdemux fails to validate the declared row alignment and chroma geometry before using them to build a video buffer layout. A crafted file can cause an out-of-bounds heap read while the sample is copied, potentially crashing the application and causing denial of service. |
| STMicroelectronics st-mems-android-linux-sensors-hal before 7bdf334 does not check whether the allowed number of channels is exceeded. |
| dcmjs is a JavaScript implementation of DICOM manipulation. Prior to 0.52.0, the DecimalString and IntegerString implementations in src/ValueRepresentation.js sanitize text with a permissive regular expression and pass the result to JavaScript's Number constructor without validating finiteness or the DICOM value-representation rules. Scientific notation overflow in a DS or IS field can produce positive or negative Infinity, while stripping alphabetic characters from signed infinity text can leave a sign-only string that converts to NaN. IntegerString also accepts exponent notation and values outside the DICOM signed 32-bit IS range. Applications that trust these parsed values can propagate invalid numbers into spatial geometry, display windowing, dose scaling, frame counts, rescaling, or volume reconstruction, causing incorrect calculations or disrupted processing. This issue is fixed in version 0.52.0. |
| stable-diffusion.cpp is a pure C/C++ library for running diffusion model (Stable Diffusion, Flux, Wan, Qwen Image, Z-Image, and more) inference. From master-742-1a13107 until master-763-4fcc6fe, IMatrixCollector::load_imatrix in src/runtime/imatrix.cpp reuses the values and counts vectors for entries with the same tensor name but resizes them only when they are empty. An untrusted .imatrix file can provide a small nval for the first entry and a larger nval for a second entry with the same name, causing the accumulation loop to write attacker-controlled floating-point and integer values beyond both heap buffers. Loading the file through the --imat-in conversion path can corrupt the heap or crash the process before a model is required. This issue is fixed in master-763-4fcc6fe. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: Place upper limit on station AID
Any station configured with an AID over 20 causes a firmware crash.
This situation occurred in our testing using an AP interface on 7922
hardware, with a modified hostapd, sourced from Mediatek's OpenWRT
feeds.
In stock hostapd, station AIDs begin counting at 1, and this
configuration is prevented with an upper limit on associated stations.
However, the modified hostapd began allocation at 65, which caused the
firmware to crash. This fix does not allow these AIDs to work, but will
prevent the firmware crash.
This crash was only seen on IFTYPE_AP interfaces, and the fix does not
appear to have an effect on IFTYPE_STATION behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Resolve soft lockup issue when opening /dev/sgX
The parameter def_reserved_size defines the default buffer size reserved
for each Sg_fd and should be restricted to a range between 0 and 1,048,576
(see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the
function sg_proc_write_dressz enforces this limit, it is possible to bypass
it by directly modifying the module parameter as shown below, which then
causes a soft lockup:
echo -1 > /sys/module/sg/parameters/def_reserved_size
exec 4<> /dev/sg0
watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537]
Modules loaded:
CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134,
PREEMPT disabled
Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version
1.16.1-2.fc37 dated 04/01/2014
...
Call Trace:
sg_build_reserve+0x5c/0xa0
sg_add_sfp+0x168/0x270
sg_open+0x16e/0x340
chrdev_open+0xbe/0x230
do_dentry_open+0x175/0x480
vfs_open+0x34/0xf0
do_open+0x265/0x3d0
path_openat+0x110/0x290
do_filp_open+0xc3/0x170
do_sys_openat2+0x71/0xe0
__x64_sys_openat+0x6d/0xa0
do_syscall_64+0x62/0x310
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The fix is to use module_param_cb to validate and reject invalid values
assigned to def_reserved_size. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
net/bluetooth/l2cap_core.c:l2cap_sig_channel() accepts BR/EDR
signaling packets up to the channel MTU and dispatches each command
without enforcing the signaling MTU (MTUsig). A Bluetooth BR/EDR peer
within radio range can send a fixed-channel CID 0x0001 packet that is
larger than MTUsig and contains many L2CAP_ECHO_REQ commands before
pairing. In a real-radio stock-kernel run, one 681-byte signaling
packet containing 168 zero-length ECHO_REQ commands made the target
transmit 168 ECHO_RSP frames over about 220 ms.
Impact: a Bluetooth BR/EDR peer within radio range, before pairing, can
force 168 ECHO_RSP frames from one 681-byte fixed-channel signaling
packet containing packed ECHO_REQ commands.
Define Linux's BR/EDR signaling MTU as the spec minimum of 48 bytes and
reject any larger signaling packet with one L2CAP_COMMAND_REJECT_RSP
carrying L2CAP_REJ_MTU_EXCEEDED before any command is dispatched.
The Bluetooth Core spec wording for MTUExceeded says the reject
identifier shall match the first request command in the packet, and
that packets containing only responses shall be silently discarded.
Linux intentionally deviates from that prescription: silently
discarding desynchronizes the peer because the remote stack never
learns its responses were dropped, and locating the first request
command requires walking command headers past MTUsig, i.e. processing
bytes from a packet we have already decided is too large to process.
We therefore always emit one reject and use the identifier from the
first command header, a single fixed-offset byte read.
The unrestricted BR/EDR signaling parser and ECHO_REQ response path both
trace to the initial git import; no later introducing commit is
available for a Fixes tag. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Clamp VBIOS HDMI retimer register count to array size
[Why & How]
The VBIOS integrated info tables (v1_11 and v2_1) contain HdmiRegNum and
Hdmi6GRegNum fields that are used as loop bounds when copying retimer I2C
register settings into fixed-size arrays (dp*_ext_hdmi_reg_settings[9]
and dp*_ext_hdmi_6g_reg_settings[3]). These u8 fields are not validated
before use, so a malformed VBIOS can specify values up to 255, causing an
out-of-bounds heap write during driver probe.
Clamp each register count to the destination array size using min_t()
before the copy loops, in both get_integrated_info_v11() and
get_integrated_info_v2_1().
(cherry picked from commit 5a7f0ef90195940c54b0f5bb85b87da55f038c69) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
bpf_prog_test_run_skb() calls eth_type_trans() first and then uses
skb->protocol to initialize sk family and address fields for the test
run.
For IPv4 and IPv6 packets, it may access ip_hdr(skb) or ipv6_hdr(skb)
even when the provided test input only contains an Ethernet header.
Reject the input earlier if the Ethernet frame carries IPv4/IPv6
EtherType but the L3 header is too short.
Fold the IPv4/IPv6 header length checks into the existing protocol
switch and return -EINVAL before accessing the network headers. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Bound MIDI 2.0 endpoint descriptor scans
The USB MIDI 2.0 endpoint parser has the same descriptor walking
pattern as the legacy MIDI parser. It validates bLength against
bNumGrpTrmBlock before reading baAssoGrpTrmBlkID[], but not against the
remaining bytes in the endpoint-extra scan.
A malformed device can therefore make later baAssoGrpTrmBlkID[] reads
consume bytes past the walked descriptor.
Reject zero-length and overlong descriptors while walking endpoint
extras. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix zero-size GDS range init on RDNA4
RDNA4 (GFX 12) hardware removes the GDS, GWS, and OA on-chip memory
resources. The gfx_v12_0 initialisation code correctly leaves
adev->gds.gds_size, adev->gds.gws_size, and adev->gds.oa_size at
zero to reflect this.
amdgpu_ttm_init() unconditionally calls amdgpu_ttm_init_on_chip() for
each of these resources regardless of size. When the size is zero,
amdgpu_ttm_init_on_chip() forwards the call to ttm_range_man_init(),
which calls drm_mm_init(mm, 0, 0). drm_mm_init() immediately fires
DRM_MM_BUG_ON(start + size <= start) -- trivially true when size is
zero -- crashing the kernel during modprobe of amdgpu on an RX 9070 XT.
Guard against this by returning 0 early from
amdgpu_ttm_init_on_chip() when size_in_page is zero. This skips TTM
resource manager registration for hardware resources that are absent,
without affecting any other GPU type.
DRM_MM_BUG_ON() only asserts if CONFIG_DRM_DEBUG_MM is enabled in
the kernel config. This is apparently rarely enabled as these chips
have been in the market for over a year and this issue was only reported
now.
Oops-Analysis: http://oops.fenrus.org/reports/bugzilla.korg/221376/report.html
(cherry picked from commit 5719ce5865279cad4fd5f01011fe037168503f2d) |
