| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in CRI-O's container-creation environment-variable handling
(`mergeEnvs` in `server/utils.go`, consumed by `setupContainerEnvironmentAndWorkdir` in
`server/container_create.go`). When a `CreateContainer` request supplies a `nil` CRI
`Envs` field, CRI-O falls back to using the target OCI image's `config.Env` entries
unfiltered, in contrast to the normal merge path, which validates each entry for a
`key=value` form before use. An OCI image whose `config.Env` contains an entry with no
`=` character (e.g. a bare `NOEQUALS` string) causes CRI-O to split that entry into a
single-element slice and then index its second element, which is out of range. This
triggers an unrecovered Go runtime panic in the `crio` daemon process, crashing it and
terminating the container-runtime service for all workloads on the node until it is
restarted. |
| Kyverno before 1.19.2 contains an unchecked type assertion in its variable-substitution engine that allows users who can submit resources to crash the policy engine. Attackers can submit resources with non-string fields referenced by {{- variable }} shallow substitution in policies, causing a panic that yields webhook denial of service and policy bypass under failurePolicy Ignore. |
| Improper Input Validation in a procnto message handler could allow an attacker with local access to send a crafted message which can cause an information disclosure in the QNX Neutrino kernel |
| Improper Input Validation in the io-char library's
DCMD_CHR_TCINJECTC devctl() handler could allow an attacker with local access
to cause data tampering in the memory input buffer of the Character I/O device
driver. |
| RRD::CGI::Image versions through 0.01 for Perl pass CGI query parameters containting "tz" to tzset(), , so a FIFO or device path blocks the CGI process.
The normalize_params method sends any query key matching /tz/i to tz(), which sets $ENV{TZ} to that value, with no validation. It then calls tzset(). glibc treats a TZ value starting with / or : as a file path and opens it, so a value naming a FIFO or a blocking device stalls the process inside tzset(). |
| A vulnerability that could allow an attacker to compromise a system. |
| Improper shell quote escaping when processing user-controlled input, potentially allowing command injection, which could lead to privilege escalation. |
| The VAPIX Edge storage API, enabling the escalation of user privileges by circumventing filesystem isolation, granting unauthorized access to protected system resources. This flaw can only be exploited after authenticating with an admin-privileged service account. |
| The VAPIX SIP configuration API lacked sufficient input validation, which could potentially lead to privilege
escalation. This flaw can only be exploited after authenticating with an admin-privileged service
account. |
| SAP NetWeaver Application Server ABAP does not sufficiently validate certain network input processed by an internal component. An unauthenticated attacker could send specially crafted network traffic to trigger a memory corruption condition in the affected functionality. Successful exploitation could allow the attacker to execute arbitrary code and fully compromise the system, resulting in a high impact on confidentiality, integrity and availability of the system. |
| CGI versions from 4.71 before 5.00 for Perl allow denial of service via a plain string dereferenced as a symbolic reference in uploadInfo.
uploadInfo dereferences its argument and calls its filename method without checking that it is an upload filehandle. A plain string naming a defined global variable, such as the parameter value from ?upload=0, is treated as a symbolic reference, and the method call on it dies. |
| IBM Safer Payments 6.4.0.00 through 6.4.2.11, 6.5.0.00 through 6.5.0.09, 6.6.0.00 through 6.6.0.07, 6.7.0.00 through 6.7.0.03, and 6.8.0.00 could allow an authenticated user to obtain sensitive information, caused by improper user input validation. By using a set of API requests the user could exploit this vulnerability to decrypt sensitive information. |
| A flaw was found in CIRCL's implementation of the FourQ elliptic curve. This vulnerability allows an attacker to compromise session security via low-order point injection and incorrect point validation during Diffie-Hellman key exchange. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Reject SIOCATMARK on non-stream sockets
SIOCATMARK reports whether the receive queue is at the urgent mark for
MSG_OOB.
In AF_UNIX, MSG_OOB is supported only for SOCK_STREAM sockets.
SOCK_DGRAM and SOCK_SEQPACKET reject MSG_OOB in sendmsg() and recvmsg(),
so they should not support SIOCATMARK either.
Return -EOPNOTSUPP for non-stream sockets before checking the receive
queue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: catc: enable basic endpoint checking
catc_probe() fills three URBs with hardcoded endpoint pipes without
verifying the endpoint descriptors:
- usb_sndbulkpipe(usbdev, 1) and usb_rcvbulkpipe(usbdev, 1) for TX/RX
- usb_rcvintpipe(usbdev, 2) for interrupt status
A malformed USB device can present these endpoints with transfer types
that differ from what the driver assumes.
Add a catc_usb_ep enum for endpoint numbers, replacing magic constants
throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints()
calls after usb_set_interface() to verify endpoint types before use,
rejecting devices with mismatched descriptors at probe time.
Similar to
- commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking")
which fixed the issue in rtl8150. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add signal type check for dcn401 get_phyd32clk_src
Trying to access link enc on a dpia link will cause a crash otherwise |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: enable basic endpoint checking
pegasus_probe() fills URBs with hardcoded endpoint pipes without
verifying the endpoint descriptors:
- usb_rcvbulkpipe(dev, 1) for RX data
- usb_sndbulkpipe(dev, 2) for TX data
- usb_rcvintpipe(dev, 3) for status interrupts
A malformed USB device can present these endpoints with transfer types
that differ from what the driver assumes.
Add a pegasus_usb_ep enum for endpoint numbers, replacing magic
constants throughout. Add usb_check_bulk_endpoints() and
usb_check_int_endpoints() calls before any resource allocation to
verify endpoint types before use, rejecting devices with mismatched
descriptors at probe time, and avoid triggering assertion.
Similar fix to
- commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking")
- commit 9e7021d2aeae ("net: usb: catc: enable basic endpoint checking") |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: use netlink policy range checks
Replace manual range and mask validations with netlink policy
annotations in ctnetlink code paths, so that the netlink core rejects
invalid values early and can generate extack errors.
- CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at
policy level, removing the manual >= TCP_CONNTRACK_MAX check.
- CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE
(14). The normal TCP option parsing path already clamps to this value,
but the ctnetlink path accepted 0-255, causing undefined behavior when
used as a u32 shift count.
- CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with
CTA_FILTER_F_ALL, removing the manual mask checks.
- CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding
a new mask define grouping all valid expect flags.
Extracted from a broader nf-next patch by Florian Westphal, scoped to
ctnetlink for the fixes tree. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP
Weiming Shi says:
xt_match and xt_target structs registered with NFPROTO_UNSPEC can be
loaded by any protocol family through nft_compat. When such a
match/target sets .hooks to restrict which hooks it may run on, the
bitmask uses NF_INET_* constants. This is only correct for families
whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge
all share the same five hooks (PRE_ROUTING ... POST_ROUTING).
ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different
semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks
validation silently passes for the wrong reasons, allowing matches to
run on ARP chains where the hook assumptions (e.g. state->in being
set on input hooks) do not hold. This leads to NULL pointer
dereferences; xt_devgroup is one concrete example:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227]
RIP: 0010:devgroup_mt+0xff/0x350
Call Trace:
<TASK>
nft_match_eval (net/netfilter/nft_compat.c:407)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61)
nf_hook_slow (net/netfilter/core.c:623)
arp_xmit (net/ipv4/arp.c:666)
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
Fix it by restricting arptables to NFPROTO_ARP extensions only.
Note that arptables-legacy only supports:
- arpt_CLASSIFY
- arpt_mangle
- arpt_MARK
that provide explicit NFPROTO_ARP match/target declarations. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kalmia: validate USB endpoints
The kalmia driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
