| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A missing authentication vulnerability in the listed NETGEAR RAX models allows an network adjacent attacker who has authenticated to wifi network to obtain sensitive information and tamper with device configuration, including administrator credentials, without authenticating to the device. This affects the confidentiality, integrity and availability of the router. |
| The auto-ban of Progressive Robot hMailServer 6.0.0-B1 through 6.3.7 can be kept from banning an address after repeated failed logons, which allows a remote unauthenticated attacker who can connect from two or more addresses to go on guessing account passwords - over SMTP AUTH, IMAP and POP3, and over ManageSieve, CalDAV/CardDAV and the REST API where those are turned on (off by default) - without being banned. When the failed logons counted from one address reach MaxInvalidLogonAttempts (3 by default), the server clears that address's count, saves an IP range that refuses the address for AutoBanMinutes (60 by default) and drops the connection. The range is named "Auto-ban: " followed by the user name of the logon that reached the limit, and no two ranges may have the same name. The server chooses the name by checking candidates as written - the name, then the name with a number, a random suffix or a GUID added - and only then cuts it to the 100 characters the database column holds, so that with a user name of 90 characters or more every candidate is the same once cut. While one range named after such a user name stands, every later ban named after a user name with the same first 90 characters therefore fails at the database: no range is saved, the address is not refused, and, its count having already been cleared, it is given the next full set of attempts. A user name of 78 to 89 characters makes later bans fail in the same way: from the second, the third or the twelfth on, depending on its length and the database, or, from 78 to 85 characters, by chance. An attacker who has once had an address banned under such a name can in this way keep guessing passwords from any other address, ending each set of attempts with a logon under a name of that kind; each failed save is reported in the server's error log (as the database error HM5032, and from 6.2.19 also as HM6099). On SQL Server a user name holding characters outside the database's code page has the same effect at any length, because the check compared names in that code page; that save is refused by the server's own check of the name, with no database error, and is reported only from 6.2.19 (HM6099). A user name holding a NUL character, which the web services listener's HTTP Basic sign-in (off by default) carries from 6.3.3 and, on the Linux builds, IMAP LOGIN, offered as installed, from 6.3.0, makes bans fail at any length: on MySQL, MariaDB and PostgreSQL the statements that check the name and save the range end at the character, so that every ban named after such a name fails, from the first and from a single address, and, its count having already been cleared, the address is given the next full set of attempts; on SQL Server and SQL Server Compact the name is bound only as far as the character, so that while one range under the part before it stands, every later ban named after such a name fails. On SQL Server, and on MySQL and MariaDB for an account whose local part has nine characters or more, a guess at the account can itself carry a name of that kind, since those databases find an account under its address followed by spaces (and SQL Server also under one holding characters its comparison ignores), so that not even a MaxInvalidLogonAttempts of 1, which bans each failed logon under the name it gave, avoids it there. |
| The auto-ban of Progressive Robot hMailServer 6.2.0 through 6.3.3, with a MySQL or MariaDB database, can be kept from banning an address after repeated failed logons, which allows a remote unauthenticated attacker to go on guessing account passwords from a single address without being banned. The server makes its MySQL tables in MySQL's utf8 character set, which holds no character outside the Basic Multilingual Plane, sends its statements as UTF-8 over a utf8mb4 connection and leaves the database's default strict mode in place. From 6.2.0 it decodes the user name of a SASL PLAIN logon as UTF-8, so the name can hold such a character. When the failed logons counted from one address reach MaxInvalidLogonAttempts (3 by default), the server clears that address's count, saves an IP range named "Auto-ban: " followed by the user name of the logon that reached the limit, and drops the connection. If such a character is in the part of the user name that the range's name keeps (the name is cut to 100 characters), the database refuses the range: no range is saved, the address is not refused, and, its count having already been cleared, it is given the next full set of attempts. An attacker can in this way spend all but the last attempt of each set on password guesses, and make the last under such a name. On Windows, POP3 AUTH PLAIN reaches it on a server as installed, and IMAP AUTHENTICATE PLAIN where IMAP SASL authentication is turned on (off by default); on Windows and on Linux (from 6.3.0), SMTP AUTH PLAIN reaches it where plain-text authentication is allowed (off by default), and ManageSieve and CardDAV where they are turned on (off by default). Each failed save is reported in the server's error log. A database whose strict mode has been turned off stores the character as a question mark and makes the first such ban, but refuses every later ban named after the same user name, or after one holding other such characters in their place, as a duplicate while the first stands, since the server cannot look up a name holding such a character there. |
| The web services listener of Progressive Robot hMailServer 6.3.3 through 6.3.7 does not apply the server's IP ranges to the connections it accepts, which allows a remote unauthenticated attacker to go on guessing account passwords at the listener's sign-ins after the auto-ban has banned the attacker's address. The listener is off by default (WebServicesHttpPort and WebServicesHttpsPort 0). From 6.3.3 its CardDAV, and from 6.3.4 its CalDAV and its Outlook Autodiscover answer to a request that carries credentials, sign an account in with HTTP Basic over HTTPS. A failed sign-in there counts towards the auto-ban as a failed logon on any other protocol does: when the failures counted from one address reach MaxInvalidLogonAttempts (3 within 30 minutes by default), the server writes an IP range that refuses the address for AutoBanMinutes (60 by default), and the SMTP, POP3, IMAP and ManageSieve listeners refuse it. The web services listener asked no IP range when it accepted a connection (in 6.3.3 nothing, from 6.3.4 the country policy alone), so it went on serving such an address, whether its ban had been earned there or on another protocol, and also an address that an administrator's IP range allowing nothing holds. Each failed sign-in there closed only its own connection, and the next connection was accepted, during the ban and after it. The firewall rule and command the auto-ban can drive (AutoBanFirewall and AutoBanCommand, off by default) are told only the SMTP, POP3 and IMAP ports, so that the firewall rule and the packaged hook did not close the listener's ports, and the fail2ban jail packaged for Linux (off by default) lists only the mail and ManageSieve ports. The only limit left on the guesses at one account there was the per-name lockout (AccountLockoutThreshold in hMailServer.ini, 0, off, by default), which has a separate defect fixed in the same release. The flaw is reached on the listener's HTTPS port: behind a TLS-terminating proxy the listener sees the proxy's address for every client, and a ban never named the client there. |
| Padloc before 4.3.1 contains a missing authentication vulnerability in ScimServer._handleScimGet() that allows unauthenticated attackers to read SCIM directories by sending any non-empty bearer token. Attackers who know an organization id can query the Users and Groups SCIM endpoints to retrieve provisioned usernames, emails, names, externalIds, and group memberships. |
| Padloc 4.0.0 before 4.3.1 contains an authentication bypass vulnerability in the legacy retrieveMFAToken handler that never counts wrong email verification codes toward the attempt limit. Unauthenticated attackers knowing a victim's email can brute force the 6-digit code to obtain verification tokens usable in signup, login and account recovery flows. |
| Vulnerability in the Oracle Communications BRM - Elastic Charging Engine product of Oracle Communications (component: Cloud native deployment). Supported versions that are affected are 15.0.0.0.0, 15.0.1.0.0, 15.1.0.0.0 and 15.2.0.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via RMI to compromise Oracle Communications BRM - Elastic Charging Engine. Successful attacks of this vulnerability can result in takeover of Oracle Communications BRM - Elastic Charging Engine. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| Missing authentication for critical function in Microsoft Windows DNS allows an authorized attacker to perform tampering locally. |
| Missing authentication for critical function in Windows Spaceport.sys allows an authorized attacker to elevate privileges locally. |
| Incorrect implementation of authentication algorithm in Windows SMB Server allows an authorized attacker to elevate privileges over a network. |
| Missing authentication for critical function in Windows Routing and Remote Access Service (RRAS) allows an authorized attacker to elevate privileges locally. |
| Missing authentication for critical function in Windows Server Update Service allows an authorized attacker to elevate privileges over a network. |
| On affected platforms running Arista EOS with authenticated Bidirectional Forwarding Detection (BFD) sessions configured, a specially crafted packet can cause the BFD session(s) to go down. This may result in undesirable network changes because various routing protocols monitor status on BFD session(s). |
| On affected platforms running Arista EOS with VRRPv2 IP Authentication Header (IP-AH) authentication configured, an unauthenticated attacker with access to the layer 2 network segment on which VRRP is running could bypass VRRP authentication and claim the virtual router master role, enabling the attacker to intercept, modify, or discard traffic that hosts on the segment send to the virtual gateway address. |
| Missing Authentication for Critical Function in AMD Secure Encrypted Virtualization (SEV) firmware could allow a malicious hypervisor to forge SEV-TIO guest request messages potentially compromising SEV-SNP guest memory integrity and confidentiality. |
| AsiaInfo Business Support System (BSS) 9.2.0 through 9.2.40 accepts unauthenticated requests via the management API '/bss/sysmgnt/api/'. A remote, unauthenticated attacker could provision a new account with administrative privileges or take over existing accounts, and perform other administrative actions. Fixed in 9.2.41. |
| Incorrect Implementation of Authentication Algorithm in the password-reset and login JWT validation in Apache OFBiz 24.09 before 24.09.08 on all platforms allows an attacker who has obtained a user's password-reset token (via email interception, log exposure, or a man-in-the-middle on the mail transport) to authenticate as that user and obtain a full, unrestricted session, including administrative access if the targeted account is an administrator, by submitting the token directly to the login endpoint instead of the intended password-change flow. Users are recommended to upgrade to version 24.09.08, which fixes this issue. |
| Authentication bypass by Assumed-Immutable data vulnerability in Apache OFBiz.
Apache OFBiz's optional Janrain Engage Social Login integration in the ecommerce component improperly binds authenticated external identities to local user accounts.
This issue affects Apache OFBiz: before 24.09.08.
Users are recommended to upgrade to version 24.09.08, which fixes the issue. |
| Incorrect default value in the REST API framework's .rest.xml definition parser (ModelApiReader) in Apache OFBiz through 24.09.07 on all platforms allows a remote, unauthenticated attacker to invoke a REST API operation without providing valid credentials via a .rest.xml resource or operation definition that omits the auth attribute, which ModelApiReader incorrectly resolves to false instead of the true default declared by rest-api.xsd.
Users are recommended to upgrade to version 24.09.08, which fixes this issue. |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Restriction of Excessive Authentication Attempts vulnerability. An unauthenticated attacker with adjacent network access could potentially exploit this vulnerability, leading to Launch of phishing attacks. |
