Export limit exceeded: 26160 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26160 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63850 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v5.0.0 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 49b1fbbb5a071197ee71e2d70959b1cb29bdc317) | ||||
| CVE-2026-98720 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Force MSR bitmap refresh if runtime eVMCS controls are modified Force a refresh of the vmcs02 MSR bitmap during nested VM-Enter if the runtime eVMCS controls (pin, primary, secondary, etc.) are being updated. If L1 isn't intercepting TPR writes, runs L2 with TPR virtualization, and then runs the same L2 with TPR virtualization disabled, KVM will fail to refresh msr_bitmap02 and leave TPR in passthrough mode even though TPR virtualization is disabled. I.e. failure to refresh the bitmap lets L2 (or L1 by proxy) read and write L0's TPR. | ||||
| CVE-2026-98724 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: reject too-short SGL segments The host controls an SGL segment's length. A nonzero length smaller than one SGL descriptor makes nr_descs zero, so nvmet_pci_epf_get_sgl_segment() reads the type byte of sgls[-1] outside the allocated buffer. If that byte contains a segment descriptor type, the function also copies the preceding 16 bytes and returns a negative descriptor count. The read was reproduced in 3/3 KASAN boots with only the host transfer mocked by a KUnit test: BUG: KASAN: slab-out-of-bounds in nvmet_pci_epf_get_sgl_segment Read of size 1 by task kunit_try_catch Call Trace: nvmet_pci_epf_get_sgl_segment nvmet_pci_epf_short_sgl_test Kernel panic - not syncing: KASAN: panic_on_warn set ... Reject segments that cannot hold one descriptor before allocating or transferring their contents. | ||||
| CVE-2026-98718 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Do cache maintenance on the source VM *before* clearing SEV state Explicitly flush caches after intra-host migration before clearing "SEV active" on the source VM, as doing cache maintenance afterwards creates a tiny window where memory reclaim could return memory to the host without performing a cache flush, e.g. as pointed out by Sashiko: CPU1 in sev_migrate_from(): src->active = false; CPU2 running concurrent unmap: Since active is false, the automatic cache flush in sev_guest_memory_reclaimed is skipped. The host frees and reallocates the page. CPU1 in sev_migrate_from(): sev_writeback_caches(src_kvm); Executes a hardware cache flush (wbnoinvd), which writes the guest's old dirty ciphertext over the new page owner's data. | ||||
| CVE-2026-98723 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: copy the hostid into the ctrl before creating PR pc_refs Commit 6202783184bf ("nvmet: Improve nvmet_alloc_ctrl() interface and implementation") added a second uuid_copy() of args->hostid near the end of nvmet_alloc_ctrl(), and commit 7b658153f1b8 ("nvmet: Remove duplicate uuid_copy") removed the original copy that sat before nvmet_ctrl_init_pr() instead of the new one. Since then nvmet_ctrl_init_pr() snapshots ctrl->hostid into the per-controller per-namespace reservation refs while the uuid_copy() from the connect data runs later, after the controller is published. The ctrl is allocated with kzalloc(), so every pc_ref created on this path stores the nil UUID. pc_ref->hostid has a single consumer: nvmet_pr_set_ctrl_to_abort() matches it against the preempted registrant's hostid to kill and drain the victim's in-flight I/O for Preempt and Abort. The match can never hit with the nil UUID, so whenever a namespace with reservations enabled exists before a host connects, which includes every reconnect, Preempt and Abort silently degrades into a plain Preempt: the preempting host sees success while the victim's in-flight I/O is still in the air. Copy the hostid where the rest of the connect data is consumed, before the controller is published and before nvmet_ctrl_init_pr() takes its snapshot. | ||||
| CVE-2026-98712 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Take a refcount on IRQs referenced by last_lr_irq Referencing the last interrupt inserted in an LR is rather fragile, as this interrupt can vanish if a concurrently unmapped LPI. Solve this by bumping up the refcount on the interrupt when populating last_lr_irq, and drop it at vgic_prune_ap_list() time, when LPIs are being reclaimed. | ||||
| CVE-2026-46317 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Reassign nested_mmus array behind mmu_lock kvm->arch.nested_mmus[] is walked under kvm->mmu_lock, including from the MMU notifier path (kvm_unmap_gfn_range() -> kvm_nested_s2_unmap()), which can run at any time. kvm_vcpu_init_nested() reallocates the array and frees the old buffer while holding only kvm->arch.config_lock, so such a walker can reference the freed array. Allocate the new array outside of mmu_lock, as the allocation can sleep. Under the lock, copy the existing entries, fix up the back pointers and reassign the array. Free the old buffer after dropping the lock, as kvfree() can sleep as well. | ||||
| CVE-2026-46197 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: validate SVM ioctl nattr against buffer size Validate nattr field against the buffer size, preventing out-of-bounds buffer access via user-controlled attribute count. (cherry picked from commit 5eca8bfdfa456c3304ca77523718fe24254c172f) | ||||
| CVE-2026-46319 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: Only release RCU read lock after ct_ft When looking up a flow table in act_ct in tcf_ct_flow_table_get(), rhashtable_lookup_fast() internally opens and closes an RCU read critical section before returning ct_ft. The tcf_ct_flow_table_cleanup_work() can complete before refcount_inc_not_zero() is invoked on the returned ct_ft resulting in a UAF on the already freed ct_ft object. This vulnerability can lead to privilege escalation. Analysis from zdi-disclosures@trendmicro.com: When initializing act_ct, tcf_ct_init() is called, which internally triggers tcf_ct_flow_table_get(). static int tcf_ct_flow_table_get(struct net *net, struct tcf_ct_params *params) { struct zones_ht_key key = { .net = net, .zone = params->zone }; struct tcf_ct_flow_table *ct_ft; int err = -ENOMEM; mutex_lock(&zones_mutex); ct_ft = rhashtable_lookup_fast(&zones_ht, &key, zones_params); // [1] if (ct_ft && refcount_inc_not_zero(&ct_ft->ref)) // [2] goto out_unlock; ... } static __always_inline void *rhashtable_lookup_fast( struct rhashtable *ht, const void *key, const struct rhashtable_params params) { void *obj; rcu_read_lock(); obj = rhashtable_lookup(ht, key, params); rcu_read_unlock(); return obj; } At [1], rhashtable_lookup_fast() looks up and returns the corresponding ct_ft from zones_ht . The lookup is performed within an RCU read critical section through rcu_read_lock() / rcu_read_unlock(), which prevents the object from being freed. However, at the point of function return, rcu_read_unlock() has already been called, and there is nothing preventing ct_ft from being freed before reaching refcount_inc_not_zero(&ct_ft->ref) at [2]. This interval becomes the race window, during which ct_ft can be freed. Free Process: tcf_ct_flow_table_put() is executed through the path tcf_ct_cleanup() call_rcu() tcf_ct_params_free_rcu() tcf_ct_params_free() tcf_ct_flow_table_put(). static void tcf_ct_flow_table_put(struct tcf_ct_flow_table *ct_ft) { if (refcount_dec_and_test(&ct_ft->ref)) { rhashtable_remove_fast(&zones_ht, &ct_ft->node, zones_params); INIT_RCU_WORK(&ct_ft->rwork, tcf_ct_flow_table_cleanup_work); // [3] queue_rcu_work(act_ct_wq, &ct_ft->rwork); } } At [3], tcf_ct_flow_table_cleanup_work() is scheduled as RCU work static void tcf_ct_flow_table_cleanup_work(struct work_struct *work) { struct tcf_ct_flow_table *ct_ft; struct flow_block *block; ct_ft = container_of(to_rcu_work(work), struct tcf_ct_flow_table, rwork); nf_flow_table_free(&ct_ft->nf_ft); block = &ct_ft->nf_ft.flow_block; down_write(&ct_ft->nf_ft.flow_block_lock); WARN_ON(!list_empty(&block->cb_list)); up_write(&ct_ft->nf_ft.flow_block_lock); kfree(ct_ft); // [4] module_put(THIS_MODULE); } tcf_ct_flow_table_cleanup_work() frees ct_ft at [4]. When this function executes between [1] and [2], UAF occurs. This race condition has a very short race window, making it generally difficult to trigger. Therefore, to trigger the vulnerability an msleep(100) was inserted after[1] | ||||
| CVE-2026-53215 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: refill RX buffers before XDP or skb use The RX error path returns the current descriptor buffer to the hardware BM pool. That is only valid while the driver still owns the buffer. mvpp2_rx_refill() can fail after the current buffer has been handed to XDP or attached to an skb. In those cases mvpp2_run_xdp() may have recycled, redirected, or queued the page for XDP_TX, and an skb free also retires the data buffer. Returning such a buffer to BM lets hardware DMA into memory that is no longer owned by the RX ring. Refill the BM pool before handing the current buffer to XDP or to the skb. If the allocation fails there, drop the packet and return the still-owned current buffer to BM, preserving the pool depth. Once the refill succeeds, later local drops retire/free the current buffer instead of returning it to BM. | ||||
| CVE-2026-46244 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_inner: Fix IPv6 inner_thoff desync In nft_inner_parse_l2l3(), when processing inner IPv6 packets, ipv6_find_hdr() correctly computes the transport header offset traversing all extension headers, but the result is immediately overwritten with nhoff + sizeof(_ip6h) (40 bytes), which only accounts for the IPv6 base header. This creates a desync between inner_thoff (wrong — points to extension header start) and l4proto (correct — e.g., IPPROTO_TCP), enabling transport header forgery and potential firewall bypass. This issue affects stable versions from Linux 6.2. For comparison, the normal (non-inner) IPv6 path correctly preserves ipv6_find_hdr()'s result. Removing the incorrect overwrite ensures that ipv6_find_hdr()'s calculated transport header offset is preserved, thereby fixing the desynchronization. | ||||
| CVE-2026-98150 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix BPF_F_CPU validation for sparse CPU IDs BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map operation flags. bpf_map_check_op_flags() currently compares that ID with num_possible_cpus(), which is the number of possible CPUs rather than a bound on CPU IDs. On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU mask was 0,2-3. A userspace program using raw bpf() syscalls creates a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations for each CPU by setting BPF_F_CPU and the CPU ID in the flags. With the old check, CPU 1 is incorrectly accepted while valid CPU 3 is rejected with -ERANGE. The CPU 1 update then reaches the per-CPU map access path and triggers: Unable to handle kernel paging request at virtual address ... pc : __pi_memcpy_generic+0x5c/0x22c lr : bpf_percpu_array_update+0x2dc/0x2e8 Call trace: __pi_memcpy_generic bpf_map_update_value map_update_elem __sys_bpf Check the CPU ID against nr_cpu_ids and cpu_possible() instead. This rejects CPU IDs outside the valid range and CPUs absent from the possible mask, while allowing valid sparse CPU IDs. | ||||
| CVE-2026-63926 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: sockmap: fix tail fragment offset in bpf_msg_push_data When bpf_msg_push_data() inserts data in the middle of a scatterlist entry, it splits the original entry into a left fragment and a right fragment. The right fragment offset is page-local, but the code advances it with `start`, which is the message-global insertion point. For inserts into a non-first SG entry, this over-advances the offset and leaves the split layout inconsistent. Advance the right fragment offset by the fragment-local delta, `start - offset`, which matches the length removed from the front of the original entry. | ||||
| CVE-2026-53205 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add bounds checks for firmware log indices Add validation that read and write indices in the firmware log buffer are within valid bounds (< data_size) before using them. If out-of-bounds indices are encountered (from firmware), clamp them to safe values instead of proceeding with invalid offsets. This prevents potential out-of-bounds buffer access when firmware supplies invalid log indices. | ||||
| CVE-2026-53228 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: sit: reload inner IPv6 header after GSO offloads ipip6_tunnel_xmit() caches the inner IPv6 header pointer at function entry and continues using it after iptunnel_handle_offloads(). For GSO skbs, iptunnel_handle_offloads() calls skb_header_unclone(). When the skb header is cloned, skb_header_unclone() can call pskb_expand_head(), which may move the skb head. The pskb_expand_head() contract requires pointers into the skb header to be reloaded after the call. If the later skb_realloc_headroom() branch is not taken, SIT uses the stale iph6 pointer to read the inner hop limit and DS field. That can read from a freed skb head after the old head's remaining clone is released. Reload iph6 after the offload helper succeeds and before subsequent reads from the inner IPv6 header. Keep the existing reload after skb_realloc_headroom(), since that branch can also replace the skb. | ||||
| CVE-2026-53329 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Use krealloc_array() in dal_vector_reserve() [Why & How] dal_vector_reserve() computes the allocation size as "capacity * vector->struct_size" using uint32_t arithmetic, which can silently wrap to a small value on overflow. This would cause krealloc to return a smaller buffer than expected, leading to heap overflows on subsequent vector appends. Replace krealloc() with krealloc_array() which performs an internal overflow check and returns NULL on wrap, preventing the issue. (cherry picked from commit 37668568641ccc4cc1dbca4923d0a16609dd5707) | ||||
| CVE-2026-53369 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: udf: reject descriptors with oversized CRC length udf_read_tagged() skips CRC verification when descCRCLength + sizeof(struct tag) exceeds the block size. A crafted UDF image can set descCRCLength to an oversized value to bypass CRC validation entirely; the descriptor is then accepted based solely on the 8-bit tag checksum, which is trivially recomputable. Reject such descriptors instead of silently accepting them. A legitimate single-block descriptor should never have a CRC length that exceeds the block. | ||||
| CVE-2026-53399 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: release layout stid on setlease failure nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via idr_alloc_cyclic() under cl_lock before returning to nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then fails, the error path frees the layout stateid directly with kmem_cache_free() without ever calling idr_remove(), leaving the IDR slot pointing at freed slab memory. Any subsequent IDR walker (states_show, client teardown) dereferences the dangling pointer. The correct teardown for an IDR-published stid is nfs4_put_stid(), which removes the IDR slot under cl_lock, dispatches sc_free (nfsd4_free_layout_stateid) to release ls->ls_file via nfsd4_close_layout(), and drops the nfs4_file reference in its tail. A second issue blocks that switch: nfsd4_free_layout_stateid() unconditionally inspects ls->ls_fence_work via delayed_work_pending() under ls_lock, but INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only after the setlease call. On the setlease-failure path the destructor would touch an uninitialized delayed_work. nfsd4_alloc_layout_stateid() nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */ nfsd4_layout_setlease() /* fails */ nfs4_put_stid() nfsd4_free_layout_stateid() delayed_work_pending(&ls->ls_fence_work) /* needs INIT */ nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */ put_nfs4_file() Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK initialization above the nfsd4_layout_setlease() call, and replace the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup with a single nfs4_put_stid(stp). | ||||
| CVE-2026-63807 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level When recovering hugepages in the shadow MMU, verify that the base gfn of the shadow page is actually contained within the target memslot, *before* querying the max mapping level given the shadow page's gfn. Failure to pre-check the validity of the gfn can lead to an out-of-bounds access to the slot's lpage_info (which typically manifests as a host #PF because the lpage_info is vmalloc'd) if the guest creates a hugepage mapping (in its PTEs) that extends "below" the bounds of a memslot. When faulting in memory for a guest, and the size of the guest mapping is greater than KVM's (current) max mapping, then KVM will create a "direct" shadow page (direct in that there are no gPTEs to shadow, and so the target gfn is a direct calculation given the base gfn of the shadow page). The hugepage recovery flow looks for such direct shadow pages, as forcing 4KiB mappings when dirty logging generates the guest > host mapping size case. When the 4KiB restriction is lifted, then KVM can replace the shadow page with a hugepage. But if KVM originally used a smaller mapping than the guest because the range of memory covered by the guest hugepage exceeds the bounds of a memslot, then KVM will link a direct shadow page with a gfn that is outside the bounds of the memslot being used to fault in memory. The rmap entry added for the leaf mapping is correct and within bounds, but the gfn of the leaf SPTE's parent shadow page will be out of bounds. BUG: unable to handle page fault for address: ffffc90000806ffc #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 100000067 P4D 100000067 PUD 1002a7067 PMD 10612f067 PTE 0 Oops: Oops: 0000 [#1] SMP CPU: 13 UID: 1000 PID: 757 Comm: mmu_stress_test Not tainted 7.1.0-rc1-48ce1e26eace-x86_pir_to_irr_comments-vm #341 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_mmu_max_mapping_level+0x79/0x2b0 [kvm] Call Trace: <TASK> kvm_mmu_recover_huge_pages+0x21b/0x320 [kvm] kvm_set_memslot+0x1ee/0x590 [kvm] kvm_set_memory_region.part.0+0x3a1/0x4d0 [kvm] kvm_vm_ioctl+0x9bf/0x15d0 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb7/0xbb0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f21c0f1a9bf </TASK> Don't bother pre-checking the bounds of the potential hugepage, i.e. don't check that e.g. sp->gfn + KVM_PAGES_PER_HPAGE(sp->role.level + 1) is also within the memslot, as the checks performed by kvm_mmu_max_mapping_level() are a superset of the basic bounds checks. I.e. pre-checking the full range would be a dubious micro-optimization. | ||||
| CVE-2026-100070 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet sashiko says: If map_addr() changes the packet length, such as when the public NAT IP string is shorter or longer than the internal IP, coff will still point to the offset relative to the pre-mangled packet. If the packet shrinks, coff could overshoot the correct position, potentially causing the next ct_sip_parse_header_uri() call to silently skip bytes and miss subsequent Contact headers. Could this lead to a failure to NAT those subsequent headers and leak internal network details? | ||||