Export limit exceeded: 26203 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26203 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98466 | 1 Linux | 1 Linux Kernel | 2026-11-10 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Transfer the hyp stack pages out of the host stage-2 fix_host_ownership() walks only the linear-map alias of each memblock region, and the per-CPU hyp stack, mapped in the private VA range for its guard page, has none. Walk each stack's VA range with the same walker. | ||||
| CVE-2026-98449 | 1 Linux | 1 Linux Kernel | 2026-11-10 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: delete compound mids on send failure before unlock When sending a compound request fails, smb_send_rqst() kicks off a reconnect. compound_send_recv() still has those mids on pending_mid_q, but it unlocks the server without removing them first. During reconnect, cifs_abort_connection() walks pending_mid_q and runs each mid callback. With no response yet, those callbacks return credits and drop in_flight. Then compound_send_recv()'s send-error path returns the same credits again. in_flight ends up decremented twice and smb2_add_credits() WARNs. syzbot hits this during SMB2_negotiate when the socket send fails. cifs_call_async() already calls delete_mid() before unlock on send failure. Do the same for compound chains and set cancelled_mid[] so the out: path does not delete them again. | ||||
| CVE-2026-98439 | 1 Linux | 1 Linux Kernel | 2026-11-10 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: cancel async requests when closing connection An async request may still be waiting when a connection is closed. This can stop the connection from closing. Cancel active async requests before waiting for them to finish. | ||||
| CVE-2026-98408 | 1 Linux | 1 Linux Kernel | 2026-11-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: rzv2h: Avoid division by zero clk_get_rate() could return 0. Avoid a division by zero panic. | ||||
| CVE-2026-98228 | 1 Linux | 1 Linux Kernel | 2026-11-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mips: select CONFIG_WEAK_REORDERING_BEYOND_LLSC from CONFIG_EYEQ On I6500 CPU cores, lld and scd give no ordering guarantees (same as all other instructions). To respect the assumption that arch_cmpxchg() is fully ordered, we must inject sync instructions above and below our lld/scd loops using the already in place WEAK_REORDERING_BEYOND_LLSC infrastructure. Otherwise, bad things can happen: [ 34.054496] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000000, epc == a80000080838e01c, ra == a80000080838dfc4 [ 34.054559] Oops[#1]: [ 34.069561] CPU: 3 UID: 0 PID: 170 Comm: pipe_race Not tainted 7.2.0-rc6-01553-gb73c35220968-dirty #103 VOLUNTARY [ 34.079932] Hardware name: Mobile EyeQ5 MP5 Evaluation board [ 34.085592] $ 0 : 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 34.093616] $ 4 : a800000808ee2618 000000000b7a879d 0000000000001000 0000000000000000 [ 34.101638] $ 8 : 0000000000e3f2c9 0000000000000000 a800000808a2a9f8 0000000000000000 [ 34.109660] $12 : a8000008139ffcd8 ffffffff84080018 a80000080837fae0 7878787878787878 [ 34.117682] $16 : a800000807e82940 0000000000001000 0000000000000000 0000000000000000 [ 34.125704] $20 : a800000802920e00 a8000008139ffdf8 a800000802649400 0000000000e3f2c9 [ 34.133726] $24 : 0000000000000006 00000001200406e0 [ 34.141783] $28 : a8000008139fc000 a8000008139ffd10 0000000000e3f2c8 a80000080838dfc4 [ 34.149837] epc : a80000080838e01c anon_pipe_read+0xd4/0x428 [ 34.155697] ra : a80000080838dfc4 anon_pipe_read+0x7c/0x428 [ 34.161549] Status: 140000e3 KX SX UX KERNEL EXL IE [ 34.166551] Cause : 40800408 (ExcCode 02) [ 34.170574] BadVA : 0000000000000000 [ 34.174161] PrId : 0001b028 (MIPS I6500) [ 34.178183] Process pipe_race (pid: 170, threadinfo=000000005ca35720, task=00000000e1013890, tls=000000014ebbb780) [ 34.188568] Stack : a800000802649400 0000000000000000 0000000000000000 a8000008139ffdd0 [ 34.196623] 0000000000000fba a800000808ee0000 0000000000000001 a8000008130c3e80 [ 34.204676] a8000008080d1280 a8000008139ffd58 a8000008139ffd58 1dbd2b22ea1dd500 [ 34.212729] a800000802649400 a800000808ee0000 ffffffffffffffea 0000000000000001 [ 34.220783] 0000000000001000 0000000000000000 00000001200ae518 ffffffffffffffff [ 34.228836] 000000fffbe0e530 a80000080837edf4 000000fffbe0e530 0000000000000000 [ 34.236890] 0000000000000000 0000000000000000 000000014ebb55a0 0000000000001000 [ 34.244943] 0000000000000001 a800000802649400 0000000000000000 0000000000000000 [ 34.252996] 0000000000000000 0000400400000000 0000000000000000 1dbd2b22ea1dd500 [ 34.261049] 00000000140000e3 a800000802649400 a800000802649400 a800000808ee0000 [ 34.269103] ... [ 34.271568] Call Trace: [ 34.274026] [<a80000080838e01c>] anon_pipe_read+0xd4/0x428 [ 34.279533] [<a80000080837edf4>] vfs_read+0x25c/0x318 [ 34.284607] [<a80000080837faac>] ksys_read+0x104/0x138 [ 34.289763] [<a80000080802b9cc>] syscall_common+0x44/0x68 [ 34.295187] [ 34.296689] Code: f84000cf 02209825 de020010 <dc420000> d8400004 02002825 0040f809 02802025 f84000c3 [ 34.306504] [ 34.308099] ---[ end trace 0000000000000000 ]--- My initial reproducer was the xdp-tools test suite. A standalone reproducer would be an lld/scd loop that, when the read is reordered by the CPU, triggers a fault. We can achieve this from userspace by stressing an anonymous pipe, which uses a mutex. Program used: // SPDX-License-Identifier: GPL-2.0 // pipe_race.c - reproducer for MIPS LL/SC reordering vs fs/pipe.c // // Two userspace processes on an anonymous pipe: // parent = writer: tight write() loop // child = reader: tight read() loop #define _GNU_SOURCE #include <assert.h> #include <errno.h> #include <sched.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include ---truncated--- | ||||
| CVE-2026-98180 | 1 Linux | 1 Linux Kernel | 2026-11-10 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: RCU-free the scheduler-containing ring and VM objects Both struct msm_ringbuffer and struct msm_gem_vm embed a struct drm_gpu_scheduler. msm_ringbuffer_destroy() and the VM free callback msm_gem_vm_free() call drm_sched_fini() on the embedded scheduler and then free the containing object with plain kfree(). drm_sched_fence_get_timeline_name() returns fence->sched->name, and the scheduler fence keeps a .release callback so it is not ops-detached on signalling. A finished fence exported to userspace (the submit out-fence, or a VM_BIND fence, via sync_file / drm_syncobj) keeps pointing at the embedded scheduler after the ring/VM is freed, so a later get_timeline_name() -- reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed slab memory (KASAN slab-use-after-free read). Per the dma-fence lifetime contract the exporter must keep the data backing a signalled fence alive for an RCU grace period. Free the scheduler-containing objects with kfree_rcu() instead of kfree(). Patchwork: https://patchwork.freedesktop.org/patch/750234/ | ||||
| CVE-2026-98177 | 1 Linux | 1 Linux Kernel | 2026-11-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid integer underflow in EOP ring size calculation. The low 6 bits of cp_hqd_eop_control store the base-2 logarithm of the EOP ring size. This was calculated as order_base_2(q->eop_ring_buffer_size / 4) - 1 But order_base_2 can in theory return 0, so this could underflow (although in practice the ring buffer size cannot be less than 4096). Change this to order_base_2(q->eop_ring_buffer_size / 8) using properties of logarithms. Also add to the above comment to make the mathematics more clear. (cherry picked from commit f0f43fcf8b2b3a924cad9444340921c96ed5f634) | ||||
| CVE-2026-98176 | 1 Linux | 1 Linux Kernel | 2026-11-10 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid integer underflow with ffs in EOP ring size calc The low 6 bits of cp_hqd_eop_control store the base-2 logarithm of the EOP ring size. This was calculated as ffs(q->eop_ring_buffer_size / sizeof(unsigned int)) - 1 - 1 But ffs can in theory return 1 or 0, so this could underflow (although in practice the ring buffer size cannot be less than 4096). Change this to ffs(q->eop_ring_buffer_size / sizeof(unsigned int) / 4) using properties of logarithms. (cherry picked from commit 4f18c56630383c14bfc6b2d65f88f2f895d2121a) | ||||
| CVE-2026-92499 | 1 Linux | 1 Linux Kernel | 2026-11-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ext4: validate readdir offset before accessing dirent A corrupted directory can trigger the following KASAN report when ext4_readdir() resumes from an invalid position: BUG: KASAN: use-after-free in __ext4_check_dir_entry+0x5ef/0x820 Read of size 2 at addr ffff88810a646000 by task repro_linear/509 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xd0/0x630 kasan_report+0xce/0x100 __ext4_check_dir_entry+0x5ef/0x820 ext4_readdir+0xcde/0x2b70 iterate_dir+0x1a1/0x520 __x64_sys_getdents64+0x12b/0x220 do_syscall_64+0xf9/0x540 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> KASAN reports use-after-free because the out-of-bounds access lands in an adjacent freed page. The directory buffer itself is still referenced. ext4_dir_llseek() invalidates the directory cookie so that ext4_readdir() rescans directory entries from the start of the block. The rescan checks only the lower bound of rec_len before advancing. A corrupted rec_len can therefore place the offset where the block has insufficient space for a complete directory entry. The rescan itself may dereference that truncated entry, or the main loop may pass it to __ext4_check_dir_entry(). The latter reads de->rec_len before validating the range. For example: block offset 0 4092 4096 |---- de1.rec_len = 4092 -----|----| de2.inode | de2.rec_len ^ OOB, reported as UAF de2 starts at offset 4092 in this 4 KiB block. Its four-byte inode fits in the block, but its rec_len starts at offset 4096 and crosses the boundary. The minimum safe length is inode-dependent. Encrypted and casefolded directory entries need eight additional hash bytes, while a valid metadata checksum tail is only 12 bytes. Cache the metadata checksum feature state and derive the minimum directory entry length from the on-disk format. Use it to bound both the rescan and the offset passed to the main loop. Report an offset in a truncated block tail and skip the remainder of the block, while continuing to accept an offset exactly at the block boundary. | ||||
| CVE-2026-89866 | 1 Linux | 1 Linux Kernel | 2026-11-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Resume device before setting EOS flag Setting the EOS flag talks to the firmware via send_firmware_command(), which accesses VPU registers. Both the STREAMOFF path (wave5_vpu_dec_job_abort()) and the V4L2_DEC_CMD_STOP path (wave5_vpu_dec_stop()) can run while the device is runtime suspended, so those register accesses hit powered-down hardware and the SoC raises an asynchronous SError, panicking the kernel: SError Interrupt on CPU3, code 0x00000000bf000000 -- SError send_firmware_command+0x2c/0x160 [wave5] wave5_vpu_dec_set_bitstream_flag+0x6c/0x80 [wave5] wave5_vpu_dec_update_bitstream_buffer+0x80/0xec [wave5] wave5_vpu_dec_job_abort+0x44/0xa0 [wave5] v4l2_m2m_cancel_job+0x110/0x19c [v4l2_mem2mem] v4l2_m2m_streamoff+0x24/0x140 [v4l2_mem2mem] Resume the device with pm_runtime_resume_and_get() around the EOS firmware command and release it with pm_runtime_put_autosuspend(), matching the runtime PM handling already done in wave5_vpu_dec_device_run(). | ||||
| CVE-2026-89556 | 1 Linux | 1 Linux Kernel | 2026-11-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: module: validate string table section types In elf_validity_cache_sechdrs, section sizes and offsets are validated, unless the section type is SHT_NULL or SHT_NOBITS. Later, elf_validity_cache_secstrings and elf_validity_cache_index_str access the section name table (.shstrtab) and symbol string table (.strtab) headers without first ensuring that their types are SHT_STRTAB. If a section type is SHT_NULL or SHT_NOBITS, sh_offset has not been validated and may reference out-of-bounds memory when dereferenced in elf_validity_cache_secstrings or elf_validity_cache_strtab. Validate that both string section headers are of type SHT_STRTAB before caching them. | ||||
| CVE-2026-63820 | 1 Linux | 1 Linux Kernel | 2026-11-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix missing read bio submission on large folio error f2fs_read_data_large_folio() can keep a read bio across multiple readahead folios. If a later folio hits an error before any of its blocks are added to the bio, folio_in_bio is false and the current error path returns immediately after ending that folio. This can leave the bio accumulated for earlier folios unsubmitted. Those folios then never receive read completion, and readers can wait indefinitely on the locked folios. Route errors through the common out path so any pending bio is submitted before returning. Stop consuming more readahead folios once an error is seen, and only wait on and clear the current folio when it was actually added to the bio. | ||||
| CVE-2026-99277 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: hold a connection reference for each session channel ksmbd_session_unregister() removes a session from the global and per- connection tables before dropping the table reference. A concurrent reference holder can keep the session and its channel list alive after those removals. Connection cleanup can no longer find the unpublished session to remove its channels. Since a channel only stores a raw conn pointer, the connection can be freed while another session reference holder is still accessing it, for example during SMB3.1.1 binding or a procfs read. Take a connection reference when registering a channel and release it on insertion failure, channel removal, or final session destruction. Keep the channels and signing keys until the session is destroyed so a response can still be signed after the session has been unregistered. | ||||
| CVE-2026-100081 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xen-netback: defer xenvif_mcast_addr_list_free() In order for the function to legitimately avoid locking/RCU, it needs to run after all TX/RX processing has finished/stopped: Lookups happen from xenvif_start_xmit(), while adds/removes happen from xenvif_tx_action() (called out of xenvif_poll()). Move the call out of xenvif_disconnect_data() (the call to the function from connect()'s error path doesn't require any cleaning up there), and put it past the synchronization point in backend_disconnect(). This is XSA-527 / CVE-2026-100081. | ||||
| CVE-2026-64510 | 1 Linux | 1 Linux Kernel | 2026-11-10 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup If acpi_nfit_init() fails after adding the acpi_desc object to the acpi_descs list, that object is never removed from that list because the acpi_nfit_shutdown() devm action is not added for the NFIT device in that case. Next, the acpi_nfit_init() failure causes acpi_nfit_probe() to fail, the acpi_desc object is freed, and a dangling pointer is left behind in the acpi_descs. Any subsequent ACPI Machine Check Exception will trigger nfit_handle_mce() which iterates over acpi_descs and so a use-after-free will occur. Moreover, if acpi_nfit_probe() returns 0 after installing a notify handler for the NFIT device and without allocating the acpi_desc object and setting the NFIT device's driver data pointer, the acpi_desc object will be allocated by acpi_nfit_update_notify() and acpi_nfit_init() will be called to initialize it. Regardless of whether or not acpi_nfit_init() fails in that case, the acpi_nfit_shutdown() devm action is not added for the NFIT device and acpi_desc is never removed from the acpi_descs list. If the acpi_desc object is freed subsequently on driver removal, any subsequent ACPI MCE will lead to a use-after-free like in the previous case. To address the first issue mentioned above, make acpi_nfit_probe() call acpi_nfit_shutdown() directly on acpi_nfit_init() failures and to address the other one, add a remove callback to the driver and make it call acpi_nfit_shutdown(). Also, since it is now possible to pass NULL to acpi_nfit_shutdown() or the acpi_desc object passed to it may not have been initialized, add checks against NULL for acpi_desc and its nvdimm_bus field to that function and make acpi_nfit_unregister() clear the latter after unregistering the NVDIMM bus. | ||||
| CVE-2026-123218 | 2 Ibm, Linux | 2 Aspera Faspex, Linux Kernel | 2026-11-10 | 9.8 Critical |
| IBM Aspera Faspex 5.0.0 through 5.0.19 could allow an authorized user to craft a specific message to bypass user authorization and gain full administrative privileges. | ||||
| CVE-2026-53400 | 1 Linux | 1 Linux Kernel | 2026-11-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix adapter registration race Adapters can be looked up based on their id using i2c_get_adapter() which takes a reference to the embedded struct device. Make sure that the adapter (including its struct device) has been initialised before adding it to the IDR to avoid accessing uninitialised data which could, for example, lead to NULL-pointer dereferences or use-after-free. Note that the i2c-dev chardev, which is registered from a bus notifier, currently uses i2c_get_adapter() so the adapter needs to be added to the IDR before registration. | ||||
| CVE-2026-53223 | 1 Linux | 1 Linux Kernel | 2026-11-10 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: guard timestamp cmsgs to real error queue skbs skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb from sk_error_queue. That assumption is not true for AF_PACKET sockets: outgoing packet taps are also delivered to packet sockets with skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET instead of struct sock_exterr_skb. If such an skb is received with timestamping enabled, the generic timestamp cmsg path can read AF_PACKET control-buffer state as sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop counter overlaps opt_stats. An odd drop count makes the path emit SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear skbs this copies past the linear head and can trigger hardened usercopy or disclose adjacent heap contents. Keep skb_is_err_queue() local to net/socket.c, but make it verify that the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal receive ownership and no longer pass as error-queue skbs, while legitimate sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free ownership. | ||||
| CVE-2025-68265 | 1 Linux | 1 Linux Kernel | 2026-11-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix admin request_queue lifetime The namespaces can access the controller's admin request_queue, and stale references on the namespaces may exist after tearing down the controller. Ensure the admin request_queue is active by moving the controller's 'put' to after all controller references have been released to ensure no one is can access the request_queue. This fixes a reported use-after-free bug: BUG: KASAN: slab-use-after-free in blk_queue_enter+0x41c/0x4a0 Read of size 8 at addr ffff88c0a53819f8 by task nvme/3287 CPU: 67 UID: 0 PID: 3287 Comm: nvme Tainted: G E 6.13.2-ga1582f1a031e #15 Tainted: [E]=UNSIGNED_MODULE Hardware name: Jabil /EGS 2S MB1, BIOS 1.00 06/18/2025 Call Trace: <TASK> dump_stack_lvl+0x4f/0x60 print_report+0xc4/0x620 ? _raw_spin_lock_irqsave+0x70/0xb0 ? _raw_read_unlock_irqrestore+0x30/0x30 ? blk_queue_enter+0x41c/0x4a0 kasan_report+0xab/0xe0 ? blk_queue_enter+0x41c/0x4a0 blk_queue_enter+0x41c/0x4a0 ? __irq_work_queue_local+0x75/0x1d0 ? blk_queue_start_drain+0x70/0x70 ? irq_work_queue+0x18/0x20 ? vprintk_emit.part.0+0x1cc/0x350 ? wake_up_klogd_work_func+0x60/0x60 blk_mq_alloc_request+0x2b7/0x6b0 ? __blk_mq_alloc_requests+0x1060/0x1060 ? __switch_to+0x5b7/0x1060 nvme_submit_user_cmd+0xa9/0x330 nvme_user_cmd.isra.0+0x240/0x3f0 ? force_sigsegv+0xe0/0xe0 ? nvme_user_cmd64+0x400/0x400 ? vfs_fileattr_set+0x9b0/0x9b0 ? cgroup_update_frozen_flag+0x24/0x1c0 ? cgroup_leave_frozen+0x204/0x330 ? nvme_ioctl+0x7c/0x2c0 blkdev_ioctl+0x1a8/0x4d0 ? blkdev_common_ioctl+0x1930/0x1930 ? fdget+0x54/0x380 __x64_sys_ioctl+0x129/0x190 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f765f703b0b Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d dd 52 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe2cefe808 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffe2cefe860 RCX: 00007f765f703b0b RDX: 00007ffe2cefe860 RSI: 00000000c0484e41 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000000 R10: 00007f765f611d50 R11: 0000000000000202 R12: 0000000000000003 R13: 00000000c0484e41 R14: 0000000000000001 R15: 00007ffe2cefea60 </TASK> | ||||
| CVE-2025-68206 | 1 Linux | 1 Linux Kernel | 2026-11-10 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: add seqadj extension for natted connections Sequence adjustment may be required for FTP traffic with PASV/EPSV modes. due to need to re-write packet payload (IP, port) on the ftp control connection. This can require changes to the TCP length and expected seq / ack_seq. The easiest way to reproduce this issue is with PASV mode. Example ruleset: table inet ftp_nat { ct helper ftp_helper { type "ftp" protocol tcp l3proto inet } chain prerouting { type filter hook prerouting priority 0; policy accept; tcp dport 21 ct state new ct helper set "ftp_helper" } } table ip nat { chain prerouting { type nat hook prerouting priority -100; policy accept; tcp dport 21 dnat ip prefix to ip daddr map { 192.168.100.1 : 192.168.13.2/32 } } chain postrouting { type nat hook postrouting priority 100 ; policy accept; tcp sport 21 snat ip prefix to ip saddr map { 192.168.13.2 : 192.168.100.1/32 } } } Note that the ftp helper gets assigned *after* the dnat setup. The inverse (nat after helper assign) is handled by an existing check in nf_nat_setup_info() and will not show the problem. Topoloy: +-------------------+ +----------------------------------+ | FTP: 192.168.13.2 | <-> | NAT: 192.168.13.3, 192.168.100.1 | +-------------------+ +----------------------------------+ | +-----------------------+ | Client: 192.168.100.2 | +-----------------------+ ftp nat changes do not work as expected in this case: Connected to 192.168.100.1. [..] ftp> epsv EPSV/EPRT on IPv4 off. ftp> ls 227 Entering passive mode (192,168,100,1,209,129). 421 Service not available, remote server has closed connection. Kernel logs: Missing nfct_seqadj_ext_add() setup call WARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41 [..] __nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat] nf_nat_ftp+0x142/0x280 [nf_nat_ftp] help+0x4d1/0x880 [nf_conntrack_ftp] nf_confirm+0x122/0x2e0 [nf_conntrack] nf_hook_slow+0x3c/0xb0 .. Fix this by adding the required extension when a conntrack helper is assigned to a connection that has a nat binding. | ||||